BarcoメーカーLED-PROの使用説明書/サービス説明書
ページ先へ移動 of 186
rëÉêÛë=dìáÇÉ ibaJm ol • Manual # 26-0501 000-00 • Revision B qj.
ii LED-PRO • User ’s Guide ibaJmol= =rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco, Inc. May 1, 2006 All rights reserved. No p art of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a r etrieval system without the prior written consent of Barco.
LED-PRO • User ’ s Guide iii agreed upon in the contract, al l guarantee claims of the purchase r will be rendered invalid. Not included in the guarantee coverage are syste m failures which are attributed to programs or special electron ic circuitry provided by the purchaser , e.
iv LED-PRO • User ’s Guide léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tion in this summary is for operating personnel. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-service able part s within the unit.
LED-PRO • User ’ s Guide v qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., which, if not strictly observed, could result in injury to or death of personnel.
vi LED-PRO • User ’s Guide `Ü~åÖÉ=eáëíçêó The table below lists the changes to the LED-PRO User ’s Guide. T able 0-1. Change History Rev Date ECO # Description Approved By A 8/1/05 147.
LED-PRO • User ’ s Guide vii q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= N In This Chapter . . . . . . . . . . . . . . . . . . . . . . .
viii LED-PRO • User ’s Guide Table of Contents Bootup with a Stored LOG O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Quick Setup and Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Menu Tree .
LED-PRO • User ’ s Guide ix Table of Conte nts Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Timing Adjust . . . . . . . . . . . . . . . . .
x LED-PRO • User ’s Guide Table of Contents Pan & Zoom Menu Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Pan H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Pan V . . . . .
LED-PRO • User ’ s Guide xi Table of Conte nts Serial Upgrade Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 ^ééÉåÇáñ=^= péÉÅáÑáÅ~íáçåëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K NNT In This Appendix .
xii LED-PRO • User ’s Guide Table of Contents ICSP in mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 ICUSE in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 IEDGE in edge nnnn . . .
LED-PRO • User ’ s Guide xiii Table of Conte nts EFVFP nn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 EFVSYNC nn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 EFVRATE nnn.n . . . . . .
xiv LED-PRO • User ’s Guide Table of Contents.
LED-PRO • User ’ s Guide 1 N K==fåíê çÇìÅ íáçå få=qÜáë=`Ü~éíÉê This chapter is designed to introduce you to the LED-PRO™ User ’s Guide. Areas to be covered are: • Chapter Structure • How to Use This G uide • Conventions • About the LED-PRO • Features • What’ s New in Firmware V ersion 2.
2 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå Chapter Structure `Ü~éíÉê=píêìÅíìêÉ The following chapte rs provide instructions for all aspects of LED-PRO operations: • Chapter 1, “ Introduction ” provides a system overview , a list of features, and a system connectivity diagram.
LED-PRO • User ’ s Guide 3 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ Following are important tips for streamlining your use of this User’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the desired location.
4 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå About the LED-PRO ^Äçìí=íÜÉ=ibaJmol The LED-PRO is a powerful all-in-one signal processor that accepts a wide range of video input signals, and processes the m to drive Barco LED displays.
LED-PRO • User ’ s Guide 5 NK==fåíêçÇìÅíáçå Features • 60 independent input configura tion memory presets. • Low video delay (3 input field s max., 20 lines min.) • Logo image captu re and recall. • Dissolve to/from stored logo.
6 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå Features • T est Pattern — Diagonal Scrollin g Mode This new feature enables users to enable “diagonal scrolling” of any selected test pattern. In Chapter 4, refer to the “ Using the T est Pattern Menu ” section on page 93 for details.
LED-PRO • User ’ s Guide 7 NK==fåíêçÇìÅíáçå Connectivity Diagram `çååÉÅíáîáíó=aá~Öê~ã The figure below provides a samp le connectivity diagram: Figure 1-1.
8 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå Application Questions ^ééäáÅ~íáçå=nìÉëíáçåë At Barco, we take pride in offering unique solutions to demanding technical problems.
LED-PRO • User ’ s Guide 9 O K = = e ~ êÇ ï~ êÉ = l êá Éå í~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides detailed diagrams of the system’s front and rear pa nels.
10 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Front Panel ibaJmol=cêçåí=m~åÉä The figure below illustra tes the LED-PRO front p anel: Figure 2-1.
LED-PRO • User ’ s Guide 11 2. Hardware Orientation LED-PRO Front Pan el aáëéä~ó=pÉÅíáçå The figure below illustra tes the Display Section : Figure 2-2.
12 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Front Panel jÉåì=hÉóë=pÉÅíáçå The figure below illustra tes the Menu Keys Section : Figure 2-4.
LED-PRO • User ’ s Guide 13 2. Hardware Orientation LED-PRO Front Pan el fåéìíë=pÉÅíáçå The figure below illustra tes the Input s Section : Figure 2-5. Inputs Section Descriptions of each button and con trol are provided below: • 1 — selects universal input 1 (the rear panel DVI connector) as the L ED wall’s source.
14 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Front Panel ^Äçìí=íÜÉ=ildl The LOGO butto n can be thought of as an additional input video source which can be selected and transitioned in the normal manner .
LED-PRO • User ’ s Guide 15 2. Hardware Orientation LED-PRO Rear Pan el ibaJmol=oÉ~ê=m~åÉä The figure below illustra tes the LED-PRO rear panel: Figure 2-1.
16 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Rear Panel 3) Universal Input 3 Five BNC connectors are provided for Universal Input 3 — each with a buf fered loop-through. The input correspo nds to Button 3 in the Inputs Section , and accepts RGB, YUV , S-Video (Y/C), or composite (NTSC, P AL or SECAM) signals.
LED-PRO • User ’ s Guide 17 PK==fåëí ~ää~íáçå få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructions for installing the L ED-PRO hardware.
18 LED-PRO • User ’s Guide 3. Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all LED-PRO in stallation procedures, observe the following important safety and handling rules t.
LED-PRO • User ’ s Guide 19 3. Installation Rack-Mount Installation o~ÅâJjçìåí=fåëí~ää~íáçå LED-PRO units are designed to be rack mou nted and are supplied with front rack-mount hardware.
20 LED-PRO • User ’s Guide 3. Installation Power Installation mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå LED-PRO is rated to operate with the following supplies: • Input Power: 100.
LED-PRO • User ’ s Guide 21 3. Installation Signal Installation páÖå~ä=fåëí~ää~íáçå The figure below illustrates a sample LED-PRO system diagram. Use this figure for reference during the signal installation process. Figure 3-2. LED-PRO System Diagram (sample) Use the following steps to install signals to/from the LED-PRO: 1.
22 LED-PRO • User ’s Guide 3. Installation Signal Installation ~ If you are using RS-232 communications, connect th e laptop to LED- PRO’s RS-232 Port .
LED-PRO • User ’ s Guide 23 3. Installation Format Connection Table cçêã~í=`çååÉÅíáçå=q~ÄäÉ Use the following table to connect various source formats to LED-PRO, using the system’s universal input connectors in conjunction with a customer supplied VGA to 5 x BNC breakout cable.
24 LED-PRO • User ’s Guide 3. Installation Format Connection Table.
LED-PRO • User ’ s Guide 25 QK==léÉê ~íáçå få=qÜáë=`Ü~éíÉê This chapter provides co mprehensive menu descriptions and detailed o perating instructions for the LED-PRO.
26 LED-PRO • User ’s Guide 4. Operation Control Overview `çåíêçä=lîÉêîáÉï There are several ways to control the LED-PRO: • The front panel is available for status and control using the display , the ADJUST knob and the two menu “navigati on” buttons ( SEL and ESC ).
LED-PRO • User ’ s Guide 27 4. Operation Power-Up I nitializ ation • Initializati on Screen 3 displays the software ve rsion that is currently being loaded.
28 LED-PRO • User ’s Guide 4. Operation Power-Up Initialization During this process, the following message is sh own: Figure 4-6. Initialization Screen — Set IP Address At the conclusion of the boot-up procedure, the Input 1 button will light and the Sta tu s Menu is shown.
LED-PRO • User ’ s Guide 29 4. Operation Quick Setup and Operations nìáÅâ=pÉíìé=~åÇ=léÉê~íáçåë For the optimum speed in system setup and operations, use the following steps . 1. Run the Setup Wizard . Refer to the “ Using the Setup Wi zard ” section on page 56 for instructions.
30 LED-PRO • User ’s Guide 4. Operation Menu Tree jÉåì=qêÉÉ The figure below illustra tes a simplified view of the LED-PRO Menu T ree . Use this diagram for reference throughout this chapter . Please note: • In the diagram, only “top level” menus are shown.
LED-PRO • User ’ s Guide 31 4. Operation Using the Menu System rëáåÖ=íÜÉ=jÉåì=póëíÉã This section lists the rules and conventions for using LED-PRO’s menu system.
32 LED-PRO • User ’s Guide 4. Operation Using the Menu System • T o navigate back up the menu structure, press ESC . Each press takes you back up the menu tree by one level. • The SEL button is also used to answer “ Ye s ” to cert ain menu queries.
LED-PRO • User ’ s Guide 33 4. Operation Quick Function Reference nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ Use the following table to quickly access the proper menu for a specific function. Both hyperlinks and page numb ers are provided. T able 4-1.
34 LED-PRO • User ’s Guide 4. Operation Quick Function Reference Enable or disable the LED boost mode Boost Mode 103 Enable or disable the LED creative mode Creative Mode 103 Enable or disable the.
LED-PRO • User ’ s Guide 35 4. Operation Quick Function Reference Set LED wall control to local or remote LED Control 82 Set minimum delay Minimum Delay 83 Set the display mode to crop or scale Di.
36 LED-PRO • User ’s Guide 4. Operation Using the Status Menu rëáåÖ=íÜÉ=pí~íìë=jÉåì The figure below illustra tes a sample St at us M enu : Figure 4-10. S tatus Menu (sample) The Status Me nu is a “standalone” menu without any sub-menus.
LED-PRO • User ’ s Guide 37 4. Operation Using the Status Menu pí~íìë=jÉåì=aÉëÅêáéíáçå The Stat us Me nu provides information about the currently selected system input (a s determined by the input buttons) and the selected output.
38 LED-PRO • User ’s Guide 4. Operation Using the Status Menu lock has not been reestablished, the display changes to " Lost Input ," and the source field remains unchanged. • <wall status> Indicates the status of the Barco LED wall that is currently connected to LED- PRO.
LED-PRO • User ’ s Guide 39 4. Operation Using the Setu p Menu rëáåÖ=íÜÉ=pÉíìé=jÉåì The following topics are discu ssed in this section: • Setup Menu T ree • Setup Menu Descr ipt.
40 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pÉíìé=jÉåì=qêÉÉ Press SET UP to access the Setup Menu . The figure be low illustrates a simplified menu tree. The symbol >> denotes additional sub-menus. The menu trees for the Setup Wizar d , Input Wi zard and Expert Mode are provided in their respective sections.
LED-PRO • User ’ s Guide 41 4. Operation Using the Setu p Menu pÉíìé=jÉåì=aÉëÅêáéíáçå The Setup Menu enables you to set up all LED-PRO input, output and system parameters. If desired, all setup information can be store d in non-volatile memory (using the “ Save System St ate ” function).
42 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pÉíìé=táò~êÇ From the Setup Menu , select Setup Wizard to display the Setup Wizard Start Menu which enables you to quickly and con veniently configure an LED wall along with the system’s output.
LED-PRO • User ’ s Guide 43 4. Operation Using the Setu p Menu pçìêÅÉ=^äáÖåãÉåí=Ô=^å~äçÖ From the Setup Menu (for an analog input source), select Source Al ignment to display the Analog Source Alignment Men u . This menu enables you to adjust all aspects of the source’s “visible” parameters.
44 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu _êáÖÜíåÉëë From the Analog Source Alignme nt Menu , select Brightness to adjust the overall brightness of the selected analog input. • The adjustment range is 75.0% to 125.0%.
LED-PRO • User ’ s Guide 45 4. Operation Using the Setu p Menu pÜ~êéåÉëë From the Analog Source Alignme nt Menu , select Sharpness to adjust the sharpness of the selected input. This selection sets the scaler's sharpening (or softening) value.
46 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pçìêÅÉ=^äáÖåãÉåí=Ô=paf From the Setup Menu (for an SD-SDI or HD-SDI input source), select Source Alignment to display the SDI Source Alignm ent Menu . This menu enables you to adjust all aspects of the source’s “visible” pa rameters.
LED-PRO • User ’ s Guide 47 4. Operation Using the Setu p Menu p~íìê~íáçå From the SDI Source Alignment Menu , select Saturation to adjust the saturation of the selected input. • The adjustment range is -75 to +125. • 100 is the defa ult setting.
48 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pçìêÅÉ=^äáÖåãÉåí=Ô=asf From the Setup Menu (for a DVI input source), select Source Alignment to display the DVI Source Alignment Menu . This menu enables you to adjust all aspects of the source’ s “visible” parameters.
LED-PRO • User ’ s Guide 49 4. Operation Using the Setu p Menu mêÉëÉíë From the Setup Menu , select Presets to display the Global Preset Menu , which enables you to store, recall or delete up to 16 Presets (or "V iews").
50 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu 3. Scroll to the Recall line and press SEL . The global Preset is recal led and applied to the selected input.
LED-PRO • User ’ s Guide 51 4. Operation Using the Setu p Menu opOPO From the Setup Menu , select RS232 to display the RS232 Menu , which en ables you to set the baud rate for the rear panel RS-2 32 connector . Figure 4-23. RS232 Menu (sample) T o set the RS-232 connector ’s baud rate: 1.
52 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu T o save the system state: 1. Select the input button (in the front p anel Inputs Section ) th at you want to be acquired and selected at power-u p. 2. Press SETUP to display the Setup Menu .
LED-PRO • User ’ s Guide 53 4. Operation Using the Setu p Menu mêçÖê~ããáåÖ=bafa The EDID DVI Input Format Menu enables yo u to update LED-PRO's preferred EDID resolution. The menu can be accessed from several poin ts within the menu tree, but all programming procedures are ide ntical.
54 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu 5. Scroll to the Program EDID line and press SEL . The following warning message is shown: Figure 4-26. EDID Warning Message ~ Press SEL to proceed with the non-volatile memory programming.
LED-PRO • User ’ s Guide 55 4. Operation Using the Setu p Menu If this error message persists and there is no DVI source or display device connected to LED-PRO, plea se contact Barco customer service. In Appendix C, refer to the “ Contact Information ” section on page 162 for det ails.
56 LED-PRO • User ’s Guide 4. Operation Using the Setup Wizard rëáåÖ=íÜÉ=pÉíìé=táò~êÇ The Setup Wizard allows users to quickly set up and align a basic LED display — without the need of the Director T oolset.
LED-PRO • User ’ s Guide 57 4. Operation Using the Setup Wizard 3. Press SEL to launch the wizard and display the Setup Wizard St art Messa ge . Figure 4-32. Setup Wizard St art Message 4. Press SEL to continue. During this interval, LED-PRO will detect the tiles, query the tiles and count the number of tiles.
58 LED-PRO • User ’s Guide 4. Operation Using the Setup Wizard ~ If the system detects “creative” LED tiles, such as MiSPHERE and MiPIX, the message “ Tile type not supported ” will appear . Because these tile types are not supported by the Wizard, please use Director T oolset for setu p.
LED-PRO • User ’ s Guide 59 4. Operation Using the Setup Wizard 8. From the Set W all Dim ensions Menu , the W all Data Co nnection Menu appears. Figure 4-36. Wall Dat a Connection Menu ~ Select Horizontally if cables are connected horizon t ally .
60 LED-PRO • User ’s Guide 4. Operation Using the Setup Wizard The figure below illustra tes the Rolling Grid T est Menu . Figure 4-38. Rolling Grid T est Menu ~ Select Y es if the grid test pattern rolls smoothly through the picture. Please continue with step 11 .
LED-PRO • User ’ s Guide 61 4. Operation Using the Setup Wizard 12. Select Next to display the Input T ype Menu : Figure 4-40. Input T y pe Menu (sample) ~ Select PA L if your primary inputs are P AL. ~ Select NTSC/PC if your primary inputs are NTSC or a PC.
62 LED-PRO • User ’s Guide 4. Operation Using the Input Wi zard rëáåÖ=íÜÉ=fåéìí=táò~êÇ The Input Wizard allows users to easily setup and align in put sources. It automatically detects and re-scales the selected input sour ce to match the physical size of the LED display .
LED-PRO • User ’ s Guide 63 4. Operation Using the Input Wi zard 5. After selecting the desired input, select Next to display the Position & Size Menu . Figure 4-44. Position and Size Menu (sample ) ~ Select H Position and adjust the input to fill the raster box precisely .
64 LED-PRO • User ’s Guide 4. Operation Using the Input Wi zard Please note the fol lowing important points regarding the gamma curve: ~ If you previously selected (and stored) a custom gamma curve with th e Director T oolset , LED-PRO will query the tiles and recognize the curve as “custom.
LED-PRO • User ’ s Guide 65 4. Operation Using the Input Wi zard 9. When the Setup Another Input Query is shown: ~ Select Ye s to return to the Select Input Menu . Repeat steps 4 through 8 for each additional inpu t. ~ Select No to exit the wizard, and return to the Statu s M enu .
66 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu rëáåÖ=íÜÉ=bñéÉêí=jçÇÉ=jÉåì The following topics are discu ssed in this section: • Expert Mode Menu T ree • Expert Mode Menu Description bñéÉêí=jçÇÉ=jÉåì=qêÉÉ From the Setup Menu , select Exper t Mode to display the Expert Mode Menu .
LED-PRO • User ’ s Guide 67 4. Operation Using the Expert Mode Menu bñéÉêí=jçÇÉ=jÉåì=aÉëÅêáéíáçå The Expert Mode Menu provides extensive “advanced” system setup functions.
68 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu fåéìí From the Expert Mode Menu , select Input to display the Input Setup Menu for the selected source.
LED-PRO • User ’ s Guide 69 4. Operation Using the Expert Mode Menu fåéìí=cçêã~í On the Input Setup Menu , the top “ Input Format ” line indicates the current inp ut video format in th.
70 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu Please note: • The 1:1 mode requires very accura te settings, as even a small sampling error can cause noise on the output image. • Both the sample clock freque ncy and phase must be correct to obt ain a properly sampled image.
LED-PRO • User ’ s Guide 71 4. Operation Using the Expert Mode Menu • Sample Phase — enables you to fine-tune the image by adjustin g the sample clock phase. Please note: ~ The adjustment range is -16 to 15 . ~ Zero is the defa ult setting. ~ The value is initially filled in by th e Auto Config command, or set to the default.
72 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu qóéÉ From the I nput Setup Menu , select Ty p e to choose amon g the possible signal types available at the current input channel. Please note: • V alues are: RGB, YPbPr , NTSC/P AL/SECAM, SDI, and DVI.
LED-PRO • User ’ s Guide 73 4. Operation Using the Expert Mode Menu The figure below illustra tes the Custom Input Format s Menu : Figure 4-54. Custom Input Formats Menu (sample) Following are descriptions of each menu function: • Custom Format — enables you to select a cust om format.
74 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu • If the selected filename has ne ver been used, the message " Format Saved " appears. • If the selected filename is already in use, the Overwrite Custom Format Menu appears.
LED-PRO • User ’ s Guide 75 4. Operation Using the Expert Mode Menu ~ If the selected format is the current input format in use, or the input format currently saved in an input configura tion, the “ Input Format In Use ” message will be shown.
76 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu ^ëéÉÅí=o~íáç From the I nput Setup Menu , select Aspect Ratio to display the Input Aspect Ratio Menu . This menu enables you to set the input source’s aspect ratio to a predefined or custom ratio.
LED-PRO • User ’ s Guide 77 4. Operation Using the Expert Mode Menu mêçÅÉëëáåÖ From the I nput Setup Menu , select Processing to display the Processing Menu wh ich enables you to adjust a variety of image processing parameters. Figure 4-60.
78 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu ~ When LED-PRO detects Macrovision copy protection on the incoming YPbPr NTSC/P AL video, the value is automatically repositioned to 60mV to account for the reduced amplitude sync pulse.
LED-PRO • User ’ s Guide 79 4. Operation Using the Expert Mode Menu aÉäÉíÉ=`çåÑáÖ From the I nput Setup Menu , select Delete Config to display the Delete Config Menu , which enables you to delete an y input configurations that we re previously saved.
80 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu lìíéìí From the Expert Mode Menu , select Output to display the LED Output Menu which enables you to configure the LED-PRO output.
LED-PRO • User ’ s Guide 81 4. Operation Using the Expert Mode Menu qáãáåÖ=^Çàìëí From the LED Output Menu , select Timi ng Adj us t to display the Output Timing Adj ust Menu , which enables you to make adjustments to the currently selecte d output format’s timing parameters.
82 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu iba=`çåíêçä From the LED O utput Menu , select LED Control to choose whether the Barco L ED wall is controlled by LED-PRO or by an external application such as Director T oolset .
LED-PRO • User ’ s Guide 83 4. Operation Using the Expert Mode Menu içÅâ=íç=pçìêÅÉ From the LED Output Menu , select Lock to Source to display the Lock T o Source Menu , which enables you to set “lock to source” parameters: Figure 4-65.
84 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu • Enable the “minimum delay” mo de when an another image p rocessor (such as an Encore or ScreenPRO-II) is used to process the video and create multiple windows. The external processor then feeds LED-PRO in a progressive 800x600 format.
LED-PRO • User ’ s Guide 85 4. Operation Using the Expert Mode Menu bÑÑÉÅíë From the Expert Mode Menu , select Eff ects to display the Effects Menu which enables you to select the transition effect that is used when switching between inp ut channels.
86 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu içÖç From the Expert Mode Menu , select Eff ects to display the Logo Menu , which enables you to save and delete a LOGO. LED-PRO stores one logo in non-volatil e memory . Figure 4-69.
LED-PRO • User ’ s Guide 87 4. Operation Using the Expert Mode Menu få=^ìíç=^ÅèìáêÉ From the Expert Mode Menu , scr oll to the In Auto Acquire function to en able or disable the automatic input acquisition (a uto-acquire) function. Press SEL , use the knob to select the desired mode, then press SEL to accept.
88 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu póëíÉã From the Expert Mode Menu , select System to display the System Me nu , which enables you to adjust a variety of system parameters, such as th e display brightness, Ethernet an d Diagnostic RS-232 settings, and panel lock.
LED-PRO • User ’ s Guide 89 4. Operation Using the Expert Mode Menu Following are descriptions of all menu functions: • Baud — selects the baud rate. V alues are: 1200, 2400, 9600, 19 200, 38400. • Parameters — select from the following values: N81, E71, O71, E72, O72.
90 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu • Set St atic IP — select the Set St atic IP function to di splay the SET IP Menu . This menu enables you to manually set a subnet mast, gateway , and static IP address when a DHCP server is not available.
LED-PRO • User ’ s Guide 91 4. Operation Using the Expert Mode Menu T o communicate with LED-PRO via Ethernet: a. Ensure that all Ethernet setup is complete b. On a Microsoft ® Windows ® PC, open a command prompt window and type the following and press ENTER : > telnet xxx.
92 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu T o unlock the panel via the command line interface: 1. Use the LOCKOUT command.
LED-PRO • User ’ s Guide 93 4. Operation Using the Test Pattern Menu rëáåÖ=íÜÉ=qÉëí=m~ííÉêå=jÉåì The following topics are discu ssed in this section • T est Pattern Menu T ree • T est Pattern Menu Description qÉëí=m~ííÉêå=jÉåì=qêÉÉ Press TEST P A T to access the T est Pattern Menu .
94 LED-PRO • User ’s Guide 4. Operation Using the Test Pattern Menu qóéÉ On the T est Pattern Menu , select th e Ty p e field to enable or disable a test pattern.
LED-PRO • User ’ s Guide 95 4. Operation Using the Pan & Zoom Menu rëáåÖ=íÜÉ=m~å=C=wççã=jÉåì The following topics are discu ssed in this section • Pan & Zoom Menu T ree • Pan & Zoom Menu Description m~å=C=wççã=jÉåì=qêÉÉ Press P AN & ZOOM to access the Pan & Zoom Menu .
96 LED-PRO • User ’s Guide 4. Operation Using the Pan & Zoom Menu m~å=C=wççã=jÉåì=aÉëÅêáéíáçå The Pan & Zoom Menu allows you to pan, tilt and zoom a selected inp ut, and save the results in a local “Preset” — an internal file held in non-volatile memory for the specific input only .
LED-PRO • User ’ s Guide 97 4. Operation Using the Pan & Zoom Menu • 0% means that the center of the input image coincides with th e center of the output image. • A positive value moves the image downward. • The screen updates when SEL is pressed.
98 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu rëáåÖ=íÜÉ=iba=jÉåì The following topics are discu ssed in this section • LED Menu T ree • LED Menu Description iba=jÉåì=qêÉÉ Press LED to access the LED Menu . The figure below il lustrates the complete menu tree — including sub-menus.
LED-PRO • User ’ s Guide 99 4. Operation Using the LED Me nu iba=jÉåì=aÉëÅêáéíáçå The LED Menu allows you to adjust variety of parameters for the LED wall itself. Many LED parameters are identical to those found in th e Output Setup Menus with in the Expert Mode Menu — and placed here for you r convenience.
100 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu iba=`çåíêçä From the LED Menu , select LED Control to choose whether the Barco LED wall is controlled by LED-PRO or by an external application such as Director T oolset .
LED-PRO • User ’ s Guide 101 4. Operation Using the LED Me nu iba=fåÑçêã~íáçå From the LED Menu , select LE D Information to display the LED Information Menu , which displays data about the LED wall and fib er communications (if utilized).
102 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu cáÄÉê=qñ=fa The Fiber T x field lists the ID of the Fiberlink T ransmitter . cáÄÉê=oñ=fa The Fiber R x field lists the ID of the Fiberlink Receiver . iba=qÉëí=m~ííÉêå From the LED Menu , select LED T est Pattern to display the Wa ll T est Pattern Menu .
LED-PRO • User ’ s Guide 103 4. Operation Using the LED Me nu Following are descriptions of each menu function. • Stat us • Ty p e pí~íìë The Stat us field ena bles or disables the LED on-screen display . qóéÉ The Ty p e field enables you to select various types of on-screen displa ys, such as mode, tile number , te mperature, etc.
104 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu opOPO From the LED Menu , select RS232 to display the RS2 32 Menu , which enables you to set the RS-232 baud rate for the Serial port — not the Diagnost ic port. The Serial port is used for communications with th e Director T oolset.
LED-PRO • User ’ s Guide 105 4. Operation Using the Input Position Menu rëáåÖ=íÜÉ=fåéìí=mçëáíáçå=jÉåì The following topics are discu ssed in this section • Input Position Menu T ree • Input Position Menu Description fåéìí=mçëáíáçå=jÉåì=qêÉÉ Press INPUT POS to access the Input Position Menu .
106 LED-PRO • User ’s Guide 4. Operation Using the Input Position Menu fåéìí=mçëáíáçå=jÉåì=aÉëÅêáéíáçå The Input Position Menu allows you to perform an abbrevia ted set of input setup functions, for operator convenience .
LED-PRO • User ’ s Guide 107 4. Operation Using the Input Position Menu s=mçëáíáçå On the Input Position Menu , select V Position to adjust (in lines) the start of the input video's active area from V sync. s=páòÉ On the Input Position Menu , select V Size to adjust (in lines) the size of the acti ve area.
108 LED-PRO • User ’s Guide 4. Operation Using the Input Position Menu 5. T o save the input configuration under the selected filename, scroll to the Save Config line and press SEL . ~ If the selected filename has never been used, the message " Config Saved " appears.
LED-PRO • User ’ s Guide 109 4. Operation Using the Input Position Menu oÉÅ~ää=`çåÑáÖ From the Input Position Menu , select Recall Con fig to display the Recall Config Menu , which enables you to recall input configurations that were previously saved for the currently selected input format and type.
11 0 LED-PRO • User ’s Guide 4. Operation Using the Input Position Menu.
LED-PRO • User ’ s Guide 111 RK==réÖê ~ÇáåÖ=p çÑí ï ~ê É få=qÜáë=`Ü~éíÉê This chapter provides detailed instructions for upgrading LED-PRO system software.
11 2 LED-PRO • User ’s Guide 5. Upgrading Software Software Upgrade Overview pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï Firmware files for the LED-PRO system are loaded into the hardware at power-up. These files are stored in the unit’s onboard flash memory , which can be upgra ded using a serial connection to a PC (or laptop).
LED-PRO • User ’ s Guide 11 3 5. Upgrading Software Downloading Software açïåäç~ÇáåÖ=pçÑíï~êÉ T wo different methods can be used to download LED-PRO software and the Flash File Loader utility: • Via FTP Site • Via We b S it e sá~=cqm=páíÉ Barco Folsom's FTP site address is: ftp.
11 4 LED-PRO • User ’s Guide 5. Upgrading Software Serial Upgrade Metho d pÉêá~ä=réÖê~ÇÉ=jÉíÜçÇ Use the following steps to upgrade LED-PRO software using a serial connecti on to your PC: 1. With the download complete, navig ate to the target folder and double-click the EXE to launch the installation shield.
LED-PRO • User ’ s Guide 11 5 5. Upgrading Software Serial Upgrade Me thod • TXD and RXD should be green. The y will flash if Enter is pressed. Figure 5-2. Flash Loader St atus Lights, Normal Condition c. Press Enter a few times to display the system prompt “ # ” on screen.
11 6 LED-PRO • User ’s Guide 5. Upgrading Software Serial Upgrade Metho d 14. On LED-PRO, perform a factory reset. Press SETUP , select Factory Reset , and then confirm. In Chapter 4, refer to the “ Factory Reset ” section on page 52 for additional details.
LED-PRO • User ’ s Guide 11 7 ^K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed technica l specifications for the LED-PRO.
11 8 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Input Specifications fåéìí=péÉÅáÑáÅ~íáçåë= The table below lists LED-PRO input specifications. * All buffered loop-through connectors, 75 Ohm ou tput impedance T able A-1.
LED-PRO • User ’ s Guide 11 9 ^K==péÉÅáÑáÅ~íáçåë Output Specifi cations lìíéìí=péÉÅáÑáÅ~íáçåë The table below lists LED-PRO output specificatio ns. rëÉê=`çåíêçä=péÉÅáÑáÅ~íáçåë The table below lists LED-PRO user control specificati ons.
120 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Communications Specifications `çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë= The table below lists LED-PRO communications specifications. * 1 15k Baud recommended for LED tile firmware upload onl y .
LED-PRO • User ’ s Guide 121 ^K==péÉÅáÑáÅ~íáçåë Pinouts máåçìíë= The following topics are discu ssed in this section: • Analog 15-pin D Connector • DVI-I Connector Pinout s .
122 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts asfJf=`çååÉÅíçê=máåçìíë The figure below illustra tes the DVI-I connector: Figure A-2. DVI-I Connector The table below lists DVI-I Connector pinouts. Please note: • T .
LED-PRO • User ’ s Guide 123 ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below illustra tes the Ethernet connector: Figure A-3. Ethernet Connector The table below lists Ethernet connector pinouts. T able A-9.
124 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=~åÇ=aá~ÖåçëíáÅ=`çååÉÅíçê The figure below illustra tes the Serial and Diagnostic connector: Figure A-4. Serial and Diagnostic Connector The table below lists Serial and Diagnostic connector pinouts.
LED-PRO • User ’ s Guide 125 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä få=qÜáë=^ééÉåÇáñ This appendix provides information regarding exte rnal remote control protocol.
126 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä Default Serial Parameters aÉÑ~ìäí=pÉêá~ä=m~ê~ãÉíÉêë Default serial communications parameters are provided for the following two ports: • Diagnostics Port • RS-232 Port Please note: • The system returns to these values after a factory reset.
LED-PRO • User ’ s Guide 127 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä Default IP Address aÉÑ~ìäí=fm=^ÇÇêÉëë The LED-PRO default IP address is 192.1 68.000.200 . Please note: • The system returns to this value af ter a factory reset.
128 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands ibaJmol=oÉãçíÉ=`çãã~åÇë The tables below list LED-PRO remote commands. Click the hyperlink for detailed descriptions and examples, or go directly to the page as listed.
LED-PRO • User ’ s Guide 129 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds IAR in n cn Adjust Input Aspect Ratio 136 IAR? in Query Input Aspect Ratio 136 IAUTOC Automatically Configure the Input 137 IBRT in nnn.n Set Input Brightness 137 IBRT? in Query Input Brightness 137 ICNT in nnn.
130 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands IRCNT in c nnn.n Set RGB Input Contrast 142 IRCNT? in c Query RGB Input Contrast 142 ISA T in nnn .
LED-PRO • User ’ s Guide 131 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds lìíéìí=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO output remote commands.
132 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands `ìëíçã=cçêã~í=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO custom format remote commands.
LED-PRO • User ’ s Guide 133 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds póëíÉã=~åÇ=bíÜÉêåÉí=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO system and Ethernet remote commands. içÖç=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO Logo remote comman ds.
134 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands bÑÑÉÅíë=oÉä~íÉÇ=`çãã~åÇë The table below lists LED-PRO effects related commands. m~åLwççãLsáÉï=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO pan/zoom/view remote commands.
LED-PRO • User ’ s Guide 135 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds ibaJmol=pÉêá~ä=`çãã~åÇ=aÉëÅêáéíáçåë obpe • Description : Query the available resolution list for the LED-PRO.
136 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands Returns De-interlacer mode in the format = mode S DINT 1 1 (Set De-interlacer mode to Fld->Frm) S DINT? 1 (Queries De-interlacer mode for channel 1) m`ljm=áå=ãçÇÉ • Description : Sets the de-interlacer's Pulldown Compe nsation mode.
LED-PRO • User ’ s Guide 137 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds Returns the Input Aspect Ratio of specified source in the format = n cn S AR 1 5 2.0 (Sets aspect ratio of channel 1 to Custom and sets the custom aspect ratio to 2.
138 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : ICPHO? in Returns the Input Clock Phase Offset in the format = nn S CPHO 1 15 (Adjusts Input clock phase offset manually to 15 on input 1.
LED-PRO • User ’ s Guide 139 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds f`pm=áå=ãçÇÉ • Description : Sets Input Colorsp ace for the selected input channel.
140 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : IGM? in Returns the Input Gamma for the specified input channel in the forma t = n S IGM 1 2.2 (Set Input gamma value to 2.2 for channel 1) S IGM? 2 (Queries channel 2's Input gamma value.
LED-PRO • User ’ s Guide 141 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds nnnn - Input Horizo ntal T otal: nnnn[(Actual Input H T otal * 2/5) - +(Actual Input H T otal * .
142 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : IRBRT? in c Returns the Input RGB Brightness value of the specified source in the format = nnn.n S IRBRT 1 R 10 (Adjusts input 1 Red Brightness to be +10%.
LED-PRO • User ’ s Guide 143 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Query : ISMP? in Returns the Input Sample Mode in the format = n S ISMP 1 0 (Adjusts Input S.
144 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : ITYPE? in Returns the Input T ype selecte d for the specified input channel in the format = mode S ITYPE 1 2 (Sets Input type to YPbPr on input channel 1.
LED-PRO • User ’ s Guide 145 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds S IVREC 1 (Recalls Input Channel View of channel 1) fsp^s=áå • Description : Input Channel V.
146 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands type [1-2], V Lock | HV Lock • Query : LCKMODE? Returns the Lock T o Source Mode and T ype in th.
LED-PRO • User ’ s Guide 147 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds ldj=ãçÇÉ • Description : Set LED Wall Ou tput Gamma.
148 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Parameters : nnnn - Output Horizontal Sync Width: nnnn [4 - (Output H T otal - Output H Active.
LED-PRO • User ’ s Guide 149 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Query : OVATV? Returns the Output V ertical Active value in the format = nnnn S OV A TV 768 (Set Output V ertical Active to 768) S OV A TV? (Queries Output V ertical Active) lsmlp=åååå • Description : Set Output V e rtical Position.
150 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands S OVTOT AL? (Querie s Output V ertical T otal) bcifpq • Description : Lists the names of all saved custom formats. • Parameters : None • Returns : List the names of saved custom formats, one name per line.
LED-PRO • User ’ s Guide 151 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Query : EFHTOTAL? Returns the custom format's Horizontal T ot al value in the format = .
152 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Parameters : None • Returns : nn.nn - H Rate S EFHRA TE? (Query custom forma t's H Rate value) bcsqlq^i=åååå • Description : Set custom format's V ertical T otal value.
LED-PRO • User ’ s Guide 153 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds Returns the custom format's V ertical Sync value in the format = nn S EFVSYNC 2 (Set custom.
154 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Usage : ENETM mode [0|1] Off|On bae`m • Description : Sets DHCP mode.
LED-PRO • User ’ s Guide 155 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Returns : MAC address. xx:xx:xx:xx :xx:xx S EMAC? (Queries for Ethernet MAC address) p_^ra=å • Description : Adjust the Serial Baud Rate.
156 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands jfkjlab • Description : Set Minimum Delay Mode • Usage : MINMODE mode [0|1] disable|enable jfk.
LED-PRO • User ’ s Guide 157 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Parameters : type - T ransi tion type [0-2] 0= Fade to black, 1=Freeze image and Cut, 2= Fade to logo in - T ransiti on delay (in seconds) [1.0s - 5.
158 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands vvv .v - V ertical Pan (-100.0% - +100.0%) sfbta=åå • Description : Delete saved View (Preset) • Parameters : nn - View Index [1 - 15] S VIEWD 1 (Delete View 1.
LED-PRO • User ’ s Guide 159 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds wllj=åååKå • Description : Selects zoom scale factor (applied both horizontally and vertically .
160 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands.
LED-PRO • User ’ s Guide 161 `K==`çåí~Åí=fåÑçêã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are discu ssed in this Appendix: • Wa r r an t y • Return Material Authoriza.
162 LED-PRO • User ’s Guide `K==`çåí~Åí=fåÑçêã~íáçå Contact Informat ion `çåí~Åí=fåÑçêã~íáçå Barco Media and Entert ainment 1 1 101 T rade Center Drive Rancho C ordova, C alifornia 95670 USA • Phone: (916) 859-2500 • Fax: (916) 859-2515 • Websites: ~ www .
LED-PRO • User ’ s Guide 163 fåÇÉ ñ kìãÉê áÅë 10/100BaseT . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 1-1 sampling . . . . . . . . . . . . . . . . . . . . . . . . . . 69 1-1 T iming Adjust Menu . . . . . . . . . . . . . . . .
164 LED-PRO • User ’s Guide Index ` Cable information . . . . . . . . . . . . . . . . . . . . . . 18 Capture logo . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Change history . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi sampling mode .
LED-PRO • User ’ s Guide 165 Index DMSG mode . . . . . . . . . . . . . . . . . . . . . . . . . 1 53 Documentation conventions and symbols . . . . . 3 Double arrow . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Download software . . . . . .
166 LED-PRO • User ’s Guide Index overview . . . . . . . . . . . . . . . . . . . . . . . . . . 49 recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Green brightness, analog source .
LED-PRO • User ’ s Guide 167 Index Inputs sec tion . . . . . . . . . . . . . . . . . . . . . . . 10, 13 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Installation hardware . . . . . . . . . . . . . . . . . . . . . . . . . 17 power .
168 LED-PRO • User ’s Guide Index LOGOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 LOGOI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 LOGOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 LOGOS .
LED-PRO • User ’ s Guide 169 Index Overview , control . . . . . . . . . . . . . . . . . . . . . . . 26 Overwrit e Custom Format Menu . . . . . . . . . . . 74 OVPOS nnnn . . . . . . . . . . . . . . . . . . . . . . . . . 149 OVSYNC nnnn . . . . . . .
170 LED-PRO • User ’s Guide Index RESH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 RESI nn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Resolution remote commands . . . . . . . . . . . . 128 Return material authorization .
LED-PRO • User ’ s Guide 171 Index description . . . . . . . . . . . . . . . . . . . . . . . . 37 fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Support, technical information .
172 LED-PRO • User ’s Guide Index v YUV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16 w Zoom . . . . . . . . . . . . . . . . .
デバイスBarco LED-PROの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Barco LED-PROをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBarco LED-PROの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Barco LED-PROの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Barco LED-PROで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Barco LED-PROを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBarco LED-PROの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Barco LED-PROに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBarco LED-PROデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。