StoeltingメーカーSO218の使用説明書/サービス説明書
ページ先へ移動 of 29
Optima SO218/318 OWNER'S MANUAL Manual No. 513571 Aug. 2001, Rev . 2.
.
Need Part s or Service? We stock the parts you need. Our Technicians are factory trained and are certified in the Stoelting Technicare program. Model No.: _______________________ Serial No.: _______________________ Purchase Date: ____________________ Start-Up Date:____________________ CALL Distributor: _________________________ Phone No.
.
OWNER'S MANUAL FOR MODEL SO218/318 STOELTING FLOOR MODEL FREEZER This manual provides basic information about the freezer. Instructions and suggestions are given covering its operation and care. The illustrations and specifications are not binding in detail.
.
SECTION DESCRIPTION PAGE 1. INTRODUCTION 1.1 Remote Possibilities .......................................................................................... 1 1.2 Features ...............................................................................
FIGURE TITLE PAGE 1 Model SO218/318 ............................................................................ 1 2 Dispenser Specifications .................................................................. 2 3 Leveling Unit ........................
1 1.1 REMOTE POSSIBILITIES The S toelting Optima delivers frozen drink profits by the pitcher . The Model SO218/318 is a high-volume producer of ready-to-serve frozen cocktails or frozen neutral base for those special drink recipes.
2 Electrical Refrigeration Crated Dimensions Dimensions 208/230/60/1 HFC-404A environmentally- Width: 22" (55.9cm) Width: 17.6"(44.7cm) 20amp circuit & plug friendly refrigerant Depth: 30" (76.2cm) Depth: 26.
3 2.1 SAFETY PRECAUTIONS Do not attempt to operate the freezer until the safety precautions and operating instructions in this manual are read completely and are thoroughly understood. Take notice of all warning labels on the freezer. The labels have been put there to help maintain a safe working environment.
4 E . Connect the power cord. The plug is designed for 208/ 230 volt/20 amp duty. The unit must be connected to a properly grounded receptacle. The electrical cord furnished as part of the freezer has a three prong grounding type plug. The use of an extension cord is not recommended.
5 SECTION 3 INITIAL SETUP AND OPERATION 3.1 OPERATOR'S SAFETY PRECAUTIONS SAFE OPERA TION IS NO ACCIDENT ; Observe these rules: A. Know the freezer . Read and understand the Operating Instructions. B. Notice all warning labels on the freezer . C.
6 E . Remove the spigot body from the front door by pu l ling the retaining pin out of the spigot handle. Push the spigot body thru the bottom of the front door . F . Remove the agitator assembly from the freezer . Pull the agitator assembly out of the freezer barrel.
7 NOTE The United Sates Department of Agriculture and the Food and Drug Administration require that lubricants used on food processing equipment be certified for this use. Use lubricants only in accordance with the manufacturer’s instructions. A . Assemble spigot “O” Rings onto parts dry , without lubrication .
8 3.8 CLEANING & SANITIZING OF S0318 WITH FILL-O-MA TIC II AND FILL-O-MA TIC III A . Empty freezer & mix container of product. B . Mix 4 gallons of warm detergent water and pour into mix cont ainer, brush mix cont ainer , pick up hose and draw tube.
9 3. 1 1 SO218/318 OPERA TION INFORMA TION FOR SERVICE PERSONNEL The SO218/318 is a cocktail/slush freezer . It is available in 208-230 volt, either air-cooled or water-cooled. The air-cooled version has front-to-back airflow requiring three inches of air space in the front and back for proper refrigeration.
10.
11 4.1 ROUTINE CLEANING T o remove spilled or dried mix from the freezer exterior , simply wash in the direction of the finish with warm soapy water and wipe dry .
12.
13 SECTION 5 REPLACEMENT PARTS INFORMATION 5.1 ORDERING P ARTS T o assure receipt of the proper replacement p a rts, supply your dealer or distributor with the following information: A. MODEL NUMBER of equipment. B. SERIAL NUMBER of model (stamped on nameplate).
14.
15 Fill-O-Matic II The Fill-O-Matic II is a self contained auto-fill system designed to be used with the Model SO318 and DQSO318 Freezer. The pump is built onto the cover of a 10 gallon mix vat.
16 Strainer On/Off Switch 1 15 V olt 15 Amp Plug Ç Å È Figure 10. Fill-o-matic II.
17 Fill-O-Matic III The Fill-O-Matic III is a gas powered auto-fill system designed to be used with Slush and Cocktail Freezers. The pump is built to hang on the side of a 10 gallon mix vat. The pump can be driven by either regulated CO 2 , nitrogen or filtered compressed air.
18 Mix Outlet Gas Outlet Gas Inlet Mix Inlet É Ë Ë Ë Figure 11. Fill-o-matic III.
19 Gas Powered T o Freezer Electric From Auto Fill Note: T ubing Sold Separately 7 = 6.
.
W ARRANTY MIX TRANSFER PUMPS / COCKT AIL / SLUSH 1. Scope: Stoelting LLC warrants to the first user (the “Buyer”) that the evaporator assembly and compressor (if applicable) of Stoelting mix trans.
デバイスStoelting SO218の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Stoelting SO218をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStoelting SO218の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Stoelting SO218の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Stoelting SO218で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Stoelting SO218を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStoelting SO218の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Stoelting SO218に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStoelting SO218デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
