Sub-ZeroメーカーBI-36UGの使用説明書/サービス説明書
ページ先へ移動 of 44
BUILT-IN DESIGN GUIDE.
Contents Built-In Design Options 4 Model Specifications 6 Planning Information 9 Framed Panels 12 Overlay Panels 18 Flush Inset Panels 22 Dispenser Specifications 28 Side Panels 29 Dual Installations .
Introducing New Built-In Refrigeration. Beginning in Fall, 2008, you will have a new line of built-in refrigeration to offer your clients. W e have r e-engineered — exterior and interior — our built-in product line to offer you the best in design options, and your clients the best in food preservation.
Built-In Design Options 4 Built-In Design Options. A design classic is now even better . Four distinct design approaches provide limitless flexibility for creating a beautiful kitchen. New lower pr ofile hinges enable the new built-in units to merge mor e seamlessly with surrounding cabinetry .
Built-In Design Options 5 Flush Inset. This brand new design option allows for a flush door and grille. Classic, platinum and carbon stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror W olf L Series ovens.
Model Specifications 6 Model BI-36F ALL FREEZER 36" (914) 36" (914) 30" (762) 30" (762) 36" (914) 36" (914) 84" (2134) 24" (610) 36" (914) 84" (2134) .
Model Specifications 7 36" (914) 42" (1067) 48" (1219) 42" (1067) 84" (2134) 24" (610) 48" (1219) 84" (2134) 24" (610) Model BI-42SD WITH DISPENSER Model BI-42S Model BI-36S Model BI-48SD WITH DISPENSER Model BI-48S Side-by-Side Models Models are shown in the stainless steel design.
Model Specifications 8 The doors of all built-in models open to a maximum of 110°. A 90° door stop is shipped with all units. For additional information, refer to the full-scale templates at the end of this guide. The handle depth reflects the tubular , curved and pro handles.
Planning Information 9 Standard Installation Opening Dimensions Framed, Overlay and Classic Stainless Steel Models Opening Width A BI-36R, BI-36RG and BI-36F 35 1 / 2 " (902) BI-30U and BI-30UG 2.
Planning Information 10 Electrical Requirements. For all built-in models, the electrical supply should be located within the shaded area shown in the illustration. Follow the National Electrical Code and local codes and ordinances when installing the receptacle.
Planning Information 11 Plumbing Requirements. All built-in models with an automatic ice maker come with a microbiological water filtration system. The water supply line should be located within the shaded area shown in the illustration.
Framed Panels 12 Framed Panels. If you and your client have order ed a framed model, you will be adding panels to give the unit the traditional Sub-Zero look.
Framed Panels 13 Framed Panels. If the thickness of the custom panels is less than 1 / 4 " (6), they must be backed up with a sheet of shim material to build the total thickness to 1 / 4 " (6). If the panel is thicker than 1 / 4 " (6), a routed edge must be provided ar ound the panel to ensure a proper fit.
Framed Panels 14 Framed Panel Specifications BI-30U / BI-36U BI-30UG / BI-36UG A W H A A B W H A A A H W H A H W H Models BI-30U and BI-30UG REFRIGERA TOR W H Door Panel 29 3 / 4 " (756) 49 15 / .
Framed Panels 15 Framed Panel Specifications BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD W W H W W H A B For Models BI-42SD and BI-48SD, panel thickness in the dispenser area can range fr om 1 / 4 " (6) to a maximum of 1 1 / 8 " (29).
Framed Panels 16 Optional Panel Grille. A louvered grille, pr oviding an 8 4" (2134) overall unit height, is standard on framed applications. Y ou may choose to use Sub-Zero’ s optional panel grille for your application.
Framed Panels 17 Partial Framed Option. If you choose not to use custom panels above and below the glasswell for dispenser Model BI-42SD or BI-48SD, a stainless steel insert panel is available as a sales accessory .
Overlay Panels 18 Overlay Panels. If you and your client have order ed an overlay model, you will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all built-in overlay models. For exact door panel dimensions, refer to overlay panel specifications on the following pages.
Overlay Panels 19 Overlay Panels. The illustrations provide a cr oss section view of the three-panel assembly showing place- ment of the trim and a rear view of the thr ee-panel assembly with critical dimensions, standard for all built-in models. Overlay grille panels for the panel grille match the design of the overlay door panels.
Overlay Panels 20 Overlay Panel Specifications BI-36R / BI-36F BI-36RG BI-30U / BI-36U BI-30UG / BI-36UG H H A W H A A B W H A A A H W H A H H H W H Grille panel dimensions listed are for a standar d 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions.
Overlay Panels 21 Overlay Panel Specifications BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD W W H H H W W H A B Grille panel dimensions listed are for a standar d 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions.
Flush Inset Application 22 This brand new design option allows for a flush door and grille. Classic, platinum and carbon stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror W olf L Series ovens. Flush Inset Application.
Flush Inset Application 23 Flush Inset Installation Opening Dimensions Flush Inset Opening Widths A B BI-36R, BI-36RG and BI-36F 35 1 / 2 " (902) 38" (965) BI-30U and BI-30UG 29 1 / 2 ".
Flush Inset Panels 24 Flush Inset Panels. The flush inset application allows decorative panels on the front of the unit to be flush with surrounding cabinetry and is available for all built-in overlay models. For exact panel dimensions, refer to flush inset panel specifications on the following pages.
Flush Inset Panels 25 5 / 8 " ( 16) 5 / 16 " (8) 1 / 2 " ( 13) FLUSH INSET P ANEL SP A CER BACKER DOOR / DRA WER / GRILLE TOP VIEW CABINETR Y Illus. A Illus. B 1 / 4 " (6) REVEAL 5 / 16 " (8) 1 / 8 " (3) DOOR DOOR TOP VIEW 1 / 2 " (13) 5 / 16 " (8) 1 / 8 " (3) CABINETR Y GRILLE SIDE VIEW Illus.
Grille panel dimensions listed are for a standar d 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions.
Flush Inset Panels 27 Flush Inset Panel Specifications BI-36S / BI-42S / BI-48S BI-42SD / BI-48SD W W H H H W W H A B Grille panel dimensions listed are for a standar d 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions.
Dispenser Specifications 28 Dispenser Area. For Models BI-42SD and BI-48SD, the refrigerator door panel must include a cut-out to accommodate the dispenser glasswell and bezel. The thickness of the panel in this area can range fr om 1 / 4 "( 6 ) to a maximum of 1 1 / 8 " (29).
Routing Detail. MAIN FRAME SIDE P ANEL ROUTING 1" (25) 1 7 / 8 " (48) 1 / 8 " (3) 1 / 2 " (13) Side Panels 29 Side Panels. Side panels can be used with all framed, overlay , flush inset and stainless steel design applica- tions.
Dual Installations 30 Dual Standard Installations. T wo framed, overlay or stainless steel units may be placed side by side in a dual installation. Some dual standard installations will requir e a dual installation kit, available through your Sub-Zero dealer .
Dual Installations 31 Opening Widths A T wo 30" (762) Models 59 3 / 4 " (1518) T wo 36" (914) Models 71 3 / 4 " (1822) IMPORT ANT NOTE: A dual installation kit will be requir ed for this installation. Classic stainless steel models are r eady to install out of the box.
Dual Installations 32 Dual Flush Inset Installation. Installing two built-in models side by side in a flush inset application will requir e adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also r equire a dual installation kit, available through your Sub-Zer o dealer .
Opening Widths A B T wo 30" (762) Models 59 3 / 4 " (1518) 62 1 / 4 " (1581) T wo 36" (914) Models 71 3 / 4 " (1822) 74 1 / 4 " (1886) IMPORT ANT NOTE: Dimensions assume a 3 / 4 " (19) panel thickness. A dual installation kit will be requir ed for this installation.
Dual Installations 34 Flush Inset Panels—Dual Installation. When installing two built-in models side by side in a flush inset application, you must decrease the width of the decora- tive flush inset panels by 1 / 2 ". Adjustments to the panel offsets will also need to be made.
Dual Installations 35 Grille panel dimensions listed are for a standar d 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions.
Dual Installations 36 Dual Installation Kit with Dual Wide Grille. This kit will replace the existing grilles that ship with the units and span the entire width of both units. The kit includes a 1 / 4 " (6) center trim strip (requir ed for proper installation of the dual wide grille), heater , dual kickplate and mounting hardwar e.
Standard Handle Lengths ALL REFRIGERA TOR / ALL FREEZER / SIDE-BY -SIDE MODELS T ubular Handle 63 7 / 8 " (1622) Pro Handle 45 1 / 8 " (1146) Curved Handle 57 5 / 8 " (1464) Stud Spacin.
Panel Thickness and Handle Profile 38 Overlay and Flush Inset. The bottom full-scale template shows handle placement and panel thickness for overlay and flush inset applications. IMPORT ANT NOTE: Panel thick- ness does not include the 1 / 4 "( 6 ) backer panel and .
MAIN FRAME 23 7 / 8 " (606) T O REAR OF UNIT O VERLA Y P ANEL 3 / 4 " (19) THICK (TYPICAL) APPRO X THICKNESS OF WRAPPED ST AINLESS STEEL DOOR DOOR CLOSED DOOR OPEN 90˚ SUB-ZERO UNIT 1 / 4 &.
DOOR OPEN 110˚ SUB-ZERO UNIT CABINETR Y FLUSH INSET P ANEL 3 / 4 " (19) THICK (TYPICAL) 1 / 4 " (6) PA N E L 1 1 / 4 " (32 )P A NEL 3 / 4 " (19 )P A N EL 1" (25 )P A N EL 1 1.
Full-Scale T emplates T OP VIEW OPTIONAL FRAMED EXTENDED FULL-LENGTH HANDLE ST ANDARD FRAMED FULL-LENGTH HANDLE DOOR CLOSED DOOR OPEN 110˚ FILLER STRIP MAIN FRAME ALLOW FOR FILLER LAP BEHIND FLANGE A.
Sub-Zero Products Limited Warranty RESIDENTIAL USE ONL Y FULL FIVE YEAR SEALED SYSTEM W ARRANTY LIMITED SIXTH THROUGH TWELFTH YEAR W ARRANTY ON THE SEALED SYSTEM FULL TWO YEAR W ARRANTY ON T OT AL PRO.
©Sub-Zero, Inc. all rights r eserved. The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this guide nor any information or images contained herein may be copied or used in whole or in part without the expr ess written permission of Sub-Zero, Inc.
BIDG 6 /2008 Sub-Zero, Inc. P O Box 44130 Madison, WI 53744-4130 800.222.7820 subzero.com.
デバイスSub-Zero BI-36UGの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sub-Zero BI-36UGをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSub-Zero BI-36UGの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sub-Zero BI-36UGの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sub-Zero BI-36UGで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sub-Zero BI-36UGを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSub-Zero BI-36UGの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sub-Zero BI-36UGに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSub-Zero BI-36UGデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
