Sun Microsystemsメーカー20の使用説明書/サービス説明書
ページ先へ移動 of 58
Sun Microsystems, Inc. www .sun.com Submit comments about this document at: http://www.sun.com/hwdocs/feedback Sun Ultra ™ 20 W or kstation Getting Star ted Guide P ar t No .
Copyright 2005-2006 Sun Microsystems, Inc., 4150 Network Cir cle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual pr operty rights relating to technology that is described in this document.
iii Contents Preface vii 1. Setting Up the Sun Ultra 20 W orkstation 1–1 1.1 Safety Information 1–1 1.2 Planning the Installation 1–2 1.3 Unpacking the W orkstation 1–3 1.3.1 Front Panel Overview 1–4 1.3.2 Back Panel Overview 1–5 1.4 Cabling the W orkstation 1–6 1.
iv Sun Ultra 20 Workstation Getting Started Guide • April 2006 2.4 Installing Drivers and Mounting the Diagnostic Partition 2–6 2.4.1 Installing Linux Operating System Drivers 2–7 2.4.2 Installing Solaris Operating System Drivers 2–9 2.4.3 Installing W indows XP Operating System Drivers 2–10 2.
Contents v A.1.2 Adding the NVIDA Ethernet Drivers to the W indows Image A–3 A.1.3 Adding Other Drivers and Modifying Setting Files A–4 A.2 Creating a 64-bit W indows XP RIS Image A–7 A.2.1 Installing W indows XP 64-bit onto the RIS Server A–7 A.
vi Sun Ultra 20 Workstation Getting Started Guide • April 2006.
vii Pr eface The Sun Ultra 20 Workstation Getting Started Guide pr ovides the information that you need to set up, power on, and configur e the workstation hardware and software. How This Book Is Or ganized This guide is organized into the following chapters: Chapter 1 contains instructions on unpacking, cabling, and powering on the workstation.
viii Sun Ultra 20 Workstation Getting Started Guide • April 2006 Shell Pr ompts T ypographic Conventions Shell Prompt C shell machine-name % C shell superuser machine-name # Bourne shell and Korn shell $ Bourne shell and Korn shell superuser # T ypeface * * The settings on your browser might differ from these settings.
Preface ix Related Documentation The document set for the Sun Ultra 20 W orkstation is described in the Where T o Find Documentation sheet that is packed with your system, and all documents are posted at the product’s documentation site. See the following URL: http://www.
x Sun Ultra 20 Workstation Getting Started Guide • April 2006 Thir d-Party W eb Sites Sun is not responsible for the availability of thir d-party web sites mentioned in this document.
1-1 CHAPTER 1 Setting Up the Sun Ultra 20 W orkstation This chapter includes information about the following topics: ■ Section 1.1, “Safety Information” on page 1- 1 ■ Section 1.2, “Planning the Installation” on page 1-2 ■ Section 1.3, “Unpacking the W orkstation” on page 1-3 ■ Section 1.
1-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006 1.2 Planning the Installation Use the following flowchart as a pr ocess tool to assist you with installation of the Sun Ultra 20 W orkstation.
Chapter 1 Setting Up the Sun Ultra 20 W or kstation 1-3 1.3 Unpacking the W orkstation Carefully unpack all workstation components fr om the packing cartons.
1-4 Sun Ultra 20 Workstation Getting Started Guide • April 2006 1.3.1 Fr ont Panel Overview FIGURE 1-3 Front Panel of the Sun Ultra 20 W orkstation T ABLE 1-1 Front Panel of the Sun Ultra 20 W orkst.
Chapter 1 Setting Up the Sun Ultra 20 W or kstation 1-5 1.3.2 Back Panel Overview FIGURE 1-4 Back Panel of the Sun Ultra 20 W orkstation T ABLE 1-2 Back Panel of the Sun Ultra 20 W orkstation Label Co.
1-6 Sun Ultra 20 Workstation Getting Started Guide • April 2006 1.4 Cabling the W orkstation FIGURE 1-5 illustrates the cable connections for the workstation. FIGURE 1-5 Cable Connections Connect the workstation and external devices in this order: 1.
Chapter 1 Setting Up the Sun Ultra 20 W or kstation 1-7 4. Connect the monitor cable as follows: ■ If a PCI Express graphics car d is not installed in the top PCI slot, connect the monitor to the onboard video connector . See the top of FIGURE 1-6 .
1-8 Sun Ultra 20 Workstation Getting Started Guide • April 2006 1.5 Powering On the W orkstation Tip – If you are installing optional internal components such as additional DIMMs, PCI cards, optical drives, or har d drives, install those components before you power on the workstation.
Chapter 1 Setting Up the Sun Ultra 20 W or kstation 1-9 1.6 Powering Of f the W orkstation 1. Save your data and close any open applications. 2. Read all of the following power-of f options before powering off the workstation: ■ Power off the workstation by using the operating system shutdown command or menu option.
1-10 Sun Ultra 20 Workstation Getting Started Guide • April 2006.
2-1 CHAPTER 2 Softwar e Installation This chapter includes the following sections: ■ Section 2.1, “Preparing for Installation” on page 2-1 ■ Section 2.1.2, “Setting up the BIOS for Operating System Installation” on page 2-4 ■ Section 2.2, “Installing the Operating System” on page 2-5 ■ Section 2.
2-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006 FIGURE 2-1 Installation Flow Diagram Install the operating system. READY TO WORK! See Section 1.5, “Powering On the W orksta- tion” on page 1-8 . See Section 3.1, “Conf iguring Solaris 10 Op- erating System Software” on page 3-1 .
Chapter 2 Software Installation 2-3 2.1.1 Erasing the Primary Boot Har d Disk If you do not have enough space on the boot partition to install an operating system, the Erase Primary Boot Hard Disk opt.
2-4 Sun Ultra 20 Workstation Getting Started Guide • April 2006 2.1.2 Setting up the BIOS for Operating System Installation If you plan to install an operating system onto the Sun Ultra 20 W orkstation, you need to make sure that the BIOS is set up corr ectly before installing the software.
Chapter 2 Software Installation 2-5 2.2 Installing the Operating System Y our Sun Ultra 20 W orkstation has the Solaris 10 Operating System preinstalled. Y ou can also choose to install one of the supported operating systems (or later versions) for Sun Ultra 20 W orkstation.
2-6 Sun Ultra 20 Workstation Getting Started Guide • April 2006 2.3 Running the up2date Utility If you are installing the Red Hat Enterprise Linux softwar e, run the up2date utility after installing the operating system and before installing the video drivers from the Sun Ultra 20 W orkstation Supplemental CD.
Chapter 2 Software Installation 2-7 2.4.1 Installing Linux Operating System Drivers The order of installation for Linux operating system and drivers is as follows: 1. Remove the preinstalled Solaris operating system from the server . See Section 2.1.1, “Erasing the Primary Boot Hard Disk” on page 2-3 .
2-8 Sun Ultra 20 Workstation Getting Started Guide • April 2006 3. If the CD does not automount, open a terminal window and mount the CD by typing the following command: Where / mountpoint is the appropriate mount point for the OS and optical drive type.
Chapter 2 Software Installation 2-9 2.4.2 Installing Solaris Operating System Drivers The following instructions are for installing drivers if you ar e performing a fresh installation of the Solaris 10 operating system. Y ou do not need to reinstall the drivers if you are using the pr einstalled version of the operating system.
2-10 Sun Ultra 20 Workstation Getting Started Guide • April 2006 2.4.3 Installing W indows XP Operating System Drivers The Sun Ultra 20 W orkstation Supplemental CD contains NVRAID, NVIDIA display , and NVIDIA chipset drivers for W indows XP .
Chapter 2 Software Installation 2-11 2.4.3.1 Installing RAID Drivers Using XPReburn Script The Sun Ultra 20 W orkstation Supplemental CD (705-1364) contains a script that allows you to create a new W indows XP CD with the needed RAID drivers. After the new CD is created, you can boot the CD and install W indows XP normally .
2-12 Sun Ultra 20 Workstation Getting Started Guide • April 2006 5. Unzip the XpReburn_ version . zip f ile. For example: 6. Run the XpReburn script. For example: The script displays the driver files it expects to be located in the curr ent directory .
Chapter 2 Software Installation 2-13 Creating a Boot Diskette for NVIDIA RAID Drivers T o create a boot diskette for W indows XP 32- bit and 64-bit, you will need a W indows system with a CD drive and diskette drive. 1. On a W indows workstation, insert the Sun Ultra 20 W orkstation Supplemental CD.
2-14 Sun Ultra 20 Workstation Getting Started Guide • April 2006 Installing Windows XP and NVIDIA RAID Drivers T o install W indows XP with the NVIDIA RAID drivers on the Sun Ultra 20 W orkstation: 1. Attach a USB f loppy diskette drive to the workstation.
Chapter 2 Software Installation 2-15 b. Double-click the executable f ile. c. Follow the instructions in the installation software. 3. Do the following steps to install the display drivers: a. Change to the directory on the Supplemental CD by typing the following command: Where OS is XP32 or XP64.
2-16 Sun Ultra 20 Workstation Getting Started Guide • April 2006.
3-1 CHAPTER 3 Setting Up the Pr einstalled Software The Solaris 10 Operating System and additional development software ar e preinstalled on all Sun Ultra 20 W orkstations. This chapter contains instructions on configuring the operating system and using the softwar e installed on the system.
3-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006 3.1.1 Licensing Information The Solaris 10 Operating System installed on your workstation requir es no licensing fee. The Sun Ultra 20 W orkstation requires Solaris 10, HW 1 or a subsequent compatible version of Solaris software.
Chapter 3 Setting Up the Preinstalled Software 3-3 3.1.4 Conf iguring the Preinstalled Solaris 10 Operating System Complete the following steps to configur e the preinstalled Solaris 10 x86 Platform Edition. 1. Power on the workstation. See Section 1.
3-4 Sun Ultra 20 Workstation Getting Started Guide • April 2006 IPv6 Option to enable IPv6 on the workstation. Security Settings Security settings and protocols. Name Service Name service to use: NIS+, NIS, DNS, LDAP , or None. Note: This window is not displayed if the workstation is not connected to a network.
Chapter 3 Setting Up the Preinstalled Software 3-5 3.2 Setting Up Pr einstalled Development Softwar e The following minimum versions of development software is pr einstalled or preloaded on your Sun Ultra 20 W orkstation: Sun Studio 10, Sun Java Studio Creator 2004Q2 and Sun Java Studio Enterprise 7.
3-6 Sun Ultra 20 Workstation Getting Started Guide • April 2006 3.2.2 Sun Java Studio Cr eator The Sun Java Studio Creator development envir onment (formerly "Project Rave") is the next-generation tool for Java application development.
Chapter 3 Setting Up the Preinstalled Software 3-7 3.2.4 NetBeans IDE The NetBeans IDE includes Java 2 Platform, Enterprise Edition (J2EE) development capabilities. This new release allows developers to not only develop applications in the web tier but also includes Enterprise JavaBeans (EJBs) and web service development capabilities.
3-8 Sun Ultra 20 Workstation Getting Started Guide • April 2006 Y ou should make and keep a full backup of the operating system, which can be used to restor e your system if it is ever needed. Instructions for backing up your Operating System are included in the Solaris 10 System Administration Collection .
Chapter 3 Setting Up the Preinstalled Software 3-9 3.3.4 Backing Up the Pr einstalled Image to Another Har d Drive Information about hard drive backups can be found in the Solaris 10 System Administration Guide. T o obtain this guide, refer to the following web site: http://docs.
3-10 Sun Ultra 20 Workstation Getting Started Guide • April 2006.
A-1 APPENDIX A Cr eating W indows Images on a RIS Server and Installing RIS Images This appendix describes how to create Sun Ultra 20 W orkstation specific images on the Remote Installation Service (R.
A-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006 A.1 Cr eating a 32-bit W indows XP (Service Pack 2) RIS Image This section tells you how to create a W indows XP 32-bit image on a RIS server and then add platform specific drivers to the image.
Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-3 7. In the “W indows Installation Image Folder Name“ screen, type a descriptive name for the W indows XP SP2 32-bit CD image you are creating.
A-4 Sun Ultra 20 Workstation Getting Started Guide • April 2006 A.1.3 Adding Other Drivers and Modifying Setting Files T o modify settings files, cr eate driver directories, and copy drivers to their directories in the W indows XP SP2 32-bit image on the RIS server , do the following steps.
Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-5 3. Add the following entries to the ristndrd.sif file : 4. T o create the $oem$ directory for the RIS image, type the following command: The $oem$ directory will have a subdirectory tr ee structure with the following directory names: 5.
A-6 Sun Ultra 20 Workstation Getting Started Guide • April 2006 a. T o copy the chipset zip package to the RIS server , type the following command: b. T o unzip the package, type the following command: 6. T o copy the chipset drivers to the proper directories, type the following commands: 7.
Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-7 A.2 Cr eating a 64-bit W indows XP RIS Image This section tells you how to create a W indows XP 64-bit image on a RIS server and then add platform specific drivers to the image.
A-8 Sun Ultra 20 Workstation Getting Started Guide • April 2006 8. In the “Friendly Description and Help T ext“ screen, type a description and help text (for future end-user reference). 9. In the “Previous Client Installation Screens Found” screen, choose “Use the new client installation screens, and overwrite the old ones“.
Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-9 1. Change these entries in the ristndrd.sif file to read as follows: 2. Remove the following entry from the ristndrd.sif file : 3. Add the following entries to the ristndrd.
A-10 Sun Ultra 20 Workstation Getting Started Guide • April 2006 The $oem$ directory will have a subdirectory tr ee structure with the following directory names: 5. T o copy Windows XP 64-bit driver f iles into the $oem$ directory tree, type the following commands.
Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-1 1 6. T o copy the driver f iles to the proper directories, type the following commands: 7.
A-12 Sun Ultra 20 Workstation Getting Started Guide • April 2006 A.3 Installing a RIS Image onto a Client W orkstation This section tells you how to install a RIS image onto a client workstation using PXE boot. 1. Either power on or reboot the workstation.
デバイスSun Microsystems 20の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sun Microsystems 20をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSun Microsystems 20の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sun Microsystems 20の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sun Microsystems 20で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sun Microsystems 20を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSun Microsystems 20の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sun Microsystems 20に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSun Microsystems 20デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
