SwannメーカーDVR4-1000 SW242-DU2の使用説明書/サービス説明書
ページ先へ移動 of 24
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
4 4 P ackage Contents DVR4-1000™ Unit Remote Contr ol Operating Instructions Easy Setup Guide Power Adapter with Cable Softwar e CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer create an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
8 8 Connecting the D VR to a TV Monitor T urning the DVR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
10 10 IMPORT ANT NOTE: The following instructions are for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pr essing the Menu Button T o navigate the menus press the dir ectional arrow keys T o select the highlighted option press or or T o return to the previous menu pr ess Note: The menu cannot be accessed while in playback or backup mode.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pr essing the Menu Button T o navigate the menus press the dir ectional arrow keys T o select the highlighted option press or or T o return to the previous menu pr ess Note: The menu cannot be accessed while in playback or backup mode.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
10 10 IMPORT ANT NOTE: The following instructions are for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
8 8 Connecting the D VR to a TV Monitor T urning the DVR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer create an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
4 4 P ackage Contents DVR4-1000™ Unit Remote Contr ol Operating Instructions Easy Setup Guide Power Adapter with Cable Softwar e CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
デバイスSwann DVR4-1000 SW242-DU2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Swann DVR4-1000 SW242-DU2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSwann DVR4-1000 SW242-DU2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Swann DVR4-1000 SW242-DU2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Swann DVR4-1000 SW242-DU2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Swann DVR4-1000 SW242-DU2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSwann DVR4-1000 SW242-DU2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Swann DVR4-1000 SW242-DU2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSwann DVR4-1000 SW242-DU2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
