SwannメーカーDVR4-1100の使用説明書/サービス説明書
ページ先へ移動 of 21
DVR4-1 100™ 4CH Digit al V ideo Recorder SW242-LP4 / SW242-LPN U U s s e e r r M M a a n n u u a a l l.
INDEX 1. DVR Featur es ....................................................................... 1 2. Layout 2.1 Front Panel ............................................................................................... 1 2.2 Rear Panel ...............
5.10 Miscellaneous Menu - Password Change ....................... 9 5.1 1 Miscellaneous Menu - Color Set ..................................... 9 5.12 Miscellaneous Menu - T ime Set .................................... 10 5.13 Hard Disk Set ...........
- 1 - User ’s Manual z 4 Channel BNC Camera Input z 1 Channel BNC V ideo Output z V ideo Source Option: NTSC / P AL z Motion Detection with Sensitivity and Area Settings z T ime Schedule Recording / Motion T riggered Recording z One A T A-100 Hard Disk Interface z USB 2.
- 2 - User ’s Manual 2.2 Rear Panel USB Port is located on the right side of the case. 2.3 Remote Contr oller CH1 Select or enlarge Chann el #1 CH2 Select or enlarge Chann el #2 CH3 Select or enlarg.
- 3 - User ’s Manual 3.1 Installing Hard Drive 1. Unplug the power supply . Don’t inst all or uninstall HDD when DVR is on!! 2. Slide the HDD tray out of DVR body carefully . 3. Connect the power cord and da ta cable to hard disk drive. Make sur e the HDD is set to be MASTER according to the hard drive manual.
- 4 - User ’s Manual 4.1 Detecting Installed Hard Drive 4.2 Recovering Lost Data 4.3 Restor e Recording Featur e After connecting the power , the system will boot-up and detect the installed hard drive. On the screen it will show the hard drive information.
- 5 - User ’s Manual 4.4 Main Scr een 5.1 Setup Menu Menu Dir ectory CAMERA SELECT RECORD SELECT RESOLUTION RECORD FRAME RECORD QUALITY SCHEDULE SET MISCELLANEOUS MENU HARD DISK SET MOTION SET VIDEO.
- 6 - User ’s Manual 5.2 Camera Select If a channel is disabled, the system will display “ OFF ” on the monitor , meanwhile, this channel won’t be selected to record. ( Refer to 5.3 Recor d Select ) 5.3 Record Select Configure which channel is allowed to record.
- 7 - User ’s Manual 5.4 Resolution There are two modes of resolution for video recording: EACH Mode: The DVR compresses and records each vi deo channel separ ately so you can enlarge a single channel to full screen disp lay and still be recording on all channels.
- 8 - User ’s Manual 5.6 Record Quality There are three levels of recording quality: High, Normal, and Low . Higher quality uses more hard drive space. Record frame rate, record quality and avai lable hard drive space will affect the total recording time of the DVR system.
- 9 - User ’s Manual 5.8 Miscellaneous Menu-Auto Record When the function is set to be “ ON ”, DVR will be aw aked to record automatically by record schedule if DVR is without any manual operations in five (5) minutes. When you choose “ OFF ”, DVR will not record until you press the [ REC ] button.
- 10 - User ’s Manual 5.13 Hard Disk Set HDD SIZE: Indicates the total capacity of the ha rd drive installed in the DVR. HDD USED : Indicates the space used in the hard driv e and the percentage of hard drive space being used. HDD FORMA T : If you format the hard drive, it will er ase all the data in the hard drive.
- 11 - User ’s Manual MOTION SET : AREA SET : Use [ Up ] and [ Down ] button to select the channe l you want to modify , press [ SEL ] button to enter the sensitive area of each camera.
- 12 - User ’s Manual 5.16 Factory Reset Press [ SEL ] button to reload factory defaults, then the DVR will reboot, all custom settings (including passwor d) will be restore to default.
- 13 - User ’s Manual 2. Recording sym bol (channel is currently recording) 3. Channel Name 4. Record Resolution (QUAD or EACH) 5. S tatus (REC, Play , FF1, FF2, FF3, REW , P AUSE) 6. HDD Info. ([M] Master Hard disk) 7. Record Schedule: (T) Continuous (M ) Motion Detection (-) No Recording 8.
- 14 - User ’s Manual Press [ Play ] button to play the latest recording. During playback, press the [ Menu ] button to list all recorded video clips from the hard drive. Newest video will be listed at the top. Press [ Up ] and [ Down ] to move the cursor and select an event, press [ Play] button to start playback.
- 15 - User ’s Manual Through connecting DVR and PC, you can us e PC V iewer software to play back and backup DVR recorded video. 8.1 PC V iewer Pr ogram 1. Put the USB Driver Program CD into your CD-ROM Drive 2. Open CD directory 3. Double click on the “PCV iewerInstall.
- 16 - User ’s Manual DVR Mode: play video clip save in DVR’ s HDD. PC Mode: play video clip (.mys file) save in PC 8.3 PC Backup Press button to open the DVR record ed event list, and then select an event, press to start backup. The video file you want to save in PC can be “.
- 17 - User ’s Manual ITEM DESCRIPTION NOTE V ideo Format NTSC / P AL Operation System None Stand-alone Camera Input Channel 4 channel Co mposite BNC V ideo Outp ut Channel 1 channel Co mposite BNC NTSC 120 frames/second 4×30 frames/second Display Frame Rate P AL 100 fram es /second 4×25 frames/second NTSC Max.
- 18 - User ’s Manual 10.1 System Connection Diagram 10.2 DVR Accessories (included) Chapter 10: Appendix Power Cord The shape of the plug m i ght be different from diff erent countries or regions.
デバイスSwann DVR4-1100の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Swann DVR4-1100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSwann DVR4-1100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Swann DVR4-1100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Swann DVR4-1100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Swann DVR4-1100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSwann DVR4-1100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Swann DVR4-1100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSwann DVR4-1100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。