SwannメーカーSW242-DALの使用説明書/サービス説明書
ページ先へ移動 of 21
DVR4-Alert™ Plus 4CH Digit al V ideo Recorder SW242-DAL / SW244-DAO U U s s e e r r M M a a n n u u a a l l.
T able of Contents 1. DVR Featur es .......................................................................................... 1 2. Overview 2.1 Front Panel .......................................................................................... 1 2.
6. Recording 6.1 S tart Reco rding .................................................................................. 12 6.2 S top Record ing .................................................................................. 13 6.3 Recording T ime on Hard Dr ive .
User Manual z 4 Channel BNC Camera Inputs z 1 Channel BNC V ideo Output z V ideo Format: NTSC / P AL z Motion Detection with Sensitivity and Area Settings z T ime Schedule Recording / Motion T riggered Recording z One A T A-100 (IDE) Hard Disk Interface z USB 2.
User Manual 2.2 Rear Panel - 2 - 2.3 Remote Contr ol CH1 Select or enlarge Chan nel #1 CH2 Select or enlarge Chan nel #2 CH3 Select or enlarge Chan nel #3 CH4 Select or enlarge Chan nel #4 Quad Quad V.
User Manual 3.1 Installing Hard Drive 1. Unplug the power supply . Never inst all or uninstall HDD when DVR is on. 2. Pull the HDD tray from the unit using the finger hole. 3. Connect the power cord and da ta cable to hard disk drive. Make sur e the HDD is set to be MASTER according to the hard drive manual.
User Manual Chapter 4: Starting the DVR 4.1 Detecting Installed Hard Drive - 4 - 4.2 Recovering Lost Data 4.3 Restor e Recording Featur e Checking HDD …… MASTER… RECOVER HDD? 0481 1-10173 5 (SEL.
User Manual 4.4 Main Scr een When the DVR is turned on the following display will appear with your connected cameras: Upper left: Percentage of hard drive space used Middle: Channel number (CH1 through CH4) Bottom right: Date and T i me Bottom left: System/recording status.
User Manual PRESS (UP , DO WN), EN TE R (SELECT) PRESS (MENU) TO EXIT MAIN MENU C A M E R A S E L E C T 12 3 4 R E C O R D S E L E C T 1 23 4 R E S O L U T I O N E A C H R E C O R D F R A M E 2 5 R .
User Manual 5.4 Resolution There are two modes of resolution for video recording: EACH Mode: The DVR compresses and records each vi deo channel separ ately so you can enlarge a single channel to full screen disp lay and still be recording on all channels.
User Manual ] 5.6 Record Quality There are three levels of recording quality: High, Normal, and Low . Higher quality records the best images but uses more hard drive space. Record frame rate, record quality and avai lable hard drive space will affect the total recording time of the DVR system.
User Manual 5.8 Miscellaneous Menu-Auto Record When this option is set to “ ON ”, the DVR will automatically continue with the current Record Schedule if no actions occur for 5 minutes. If you choose “ OFF ”, the DVR will not record until you press the [ REC ] button.
User Manual 5.12 Miscellaneous Menu-T ime Set - 10 - 5.13 Hard Disk Set TIME SET ∨ 2008/08/08 20:08:08 PRESS (UP ,DOWN), ENTER (SELECT) PRESS (MENU) TO EXIT HA RD D ISK SET OVERWRITE ENABLED [YES] M.
User Manual 5.14 Motion Set SENSITIVITY : Use [ Up ] and [ Do wn ] button to highlight the channel you want to modify and press [ SEL ] to adjust sensitivity of motion detection on each channel. High (1----------9, OFF) Low When “ OFF ”, the channel will not detect motion or trigger m otion recording.
User Manual 5.15 V ideo Mode Select NTSC (North America) or P AL (Europe/Australia) video system. 5.16 Factory Reset Press [ SEL ] button to reset the DVR to fa ctory defaults. The DVR will reboot and all custom settings (including pa ssword) will be restored to default.
User Manual 1. Hard Drive Usage (Displayed as a percentage) 2. Recording symbol (channel is currently re cording) 3. Camera Number 4. Record Mode (QUAD or EACH) 5. S tatus (REC, Play , FF1, FF2, FF3, REW , P AUSE) 6. HDD Info. ([M] Master Hard disk) 7.
User Manual Press [ Play ] button to play the last recording. During playback, press the [ Menu ] button to list all recorded video clips from the hard drive. Newest video will be listed at the top. Press [ Up ] and [ Down ] to move the cursor and select an event, press [ Play] button to start playback.
User Manual Chapter 8: USB Pr ogramming Using the provided DVR PC V iewer soft ware, you can connect the DVR Alert to your PC to playback or backup footage. 8.1 PC V iewer Program 1. Insert the CD into your CD-ROM Drive 2. Open CD directory 3. Double click on the “PCV iewerInstall.
User Manual - 16 - DVR Mode: play video clips saved on DVR’ s HDD. PC Mode: play video clips (.mys file) saved on PC 8.3 PC Backup Press button to open the DVR recorded event list and select an event. Press to begin backup. Back up video files can be saved as “.
User Manual Chapter 9: Specifications ITEM DESCRIPTION NOTE V ideo Format NTSC / P AL Operation System None Stand-alone Camera Input Channel 4 channel Co mposite BNC V ideo Outp ut Channel 1 channel Co mposite BNC NTSC 120 frames/secon d 4×30 frames/second Display Frame Rate P AL 100 fram es /second 4×25 frames/second NTSC Max.
User Manual Chapter 10: Appendix 10.1 System Connection Diagram 10.2 DVR Accessories (included) Power Cord The shape of the plug might be dif ferent from dif ferent countries or regions.
デバイスSwann SW242-DALの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Swann SW242-DALをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSwann SW242-DALの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Swann SW242-DALの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Swann SW242-DALで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Swann SW242-DALを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSwann SW242-DALの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Swann SW242-DALに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSwann SW242-DALデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。