TargusメーカーACP60USの使用説明書/サービス説明書
ページ先へ移動 of 24
ACP60US / 410-0493-001C USER GUI D E 30 Visit our W ebsite at www .targus.com Features and specifications subject to change without notice. © 2007 T argus Group International, Inc.
T AR GUS EXPRE SSCARD TM NO TEBOOK DOC KI NG S T A TION WI TH DIG IT AL VI D E O AN D AU DIO Intr oduction Congratulations on y our purchase of the T argus ExpressCard Notebook Docking Station with Digital Video and Audio .
T argus ExpressCard Notebook Docking Station with Digital Video and Audio Ergonomic Design Ergonomic design helps increase airflow under notebook f or cooler operation. The raised platform provides a more comf or tab le position for typing. F eatur es • (4) High Speed USB 2.
Syst em R equir ements Har dware • PC with an Intel® P entium® processor or equivalent • CD-ROM drive • ExpressCard 34mm or 54mm slot Oper ating Syst em • Windows® XP - Service Pac k 2 or g.
About the ExpressCar d Connector Car d The ExpressCard dock comes with a cab le, a spacer (see “Using the Spacer Connector” for additional instructions) and 34mm card to connect to an ExpressCard slot in your notebook. The cable is remov able from the card.
The spacer simply snaps on to the existing ExpressCard and is inser ted with the card connector into a 54mm ExpressCard slot. A spacer is supplied to ensure the proper fitting of the 34mm Express- Card into a 54mm slot. This spacer has no functionality other than to prev ent any mo vement of the card once it is inserted into the 54mm slot.
T argus ExpressCard Notebook Dock i ng Stat i on w i th D i g i tal V i deo and Aud i o Before beg i nn i ng mak e sure the spacer and PC card are al i gned as below . 1 . When attach i ng the spacer , ensure the spacer i s at a 45 degree angle to the PC card .
Installing the Docking S tation Dr iver Installing the docking station driver enab les your operating system to recognize the docking station and its ports once it’ s connected. 1. T ur n on your computer . 2. Inser t the driver software CD into your computer’ s CD-ROM drive.
4. After connecting the ExpressCard to the computer, wait until the computer finishes recognizing the devices bef ore pressing OK in the dialogue box. This process will take about 3-5 minutes .
LED S tatus Indica tor Lights Once all device driv ers are installed, the USB LED status indicator lights on on each side of the docking station glow when y ou connect devices to the doc king station. • Green Tx light illuminates when connected to a network and the yellow Rx light flashes when data is tr ansmitting to or from the network.
“Easy Access” High power USB ports with LED light indicator Lock slot for use with T argus locks - Models nos. P A410U or P A450U (not included) Connecting New Devic es T o a void possib le damage when connecting a new de vice, do not f orce the cable connector into the port on the docking station.
Connecting a PDA 1. Attach the cable connector to the serial por t on the docking station. 2. V erify that the COM por t setting, in either your HotSync® or ActiveSync® softw are, matches the setting on the docking station. T o v erify the COM por t setting on the docking station, ref er to “V erifying Devices are Installed”.
Connecting and Configur ing an Audio Device This docking station comes with a 5.1 A udio Suppor t. The back of the Device has 5 ports dedicated to Audio . Microphone In – Pink F ront Channel or Line Out – Green Rear Channel – Black Center Channel / subwoof er– Orange S/PDIF – Digital Audio Interf ace (PCM, Dolby Digital 5.
2. T o connect a microphone, plug it into the Pink 3.5mm por t. 3. T o enable your headphones or speak ers, you must first choose C- Media USB Sound Device in the Properties Settings 4. For Windows® XP , go to the Contr ol Panel and choose Sound and Audio .
Installing and Configur ing a S/PDIF (Sony/ Philips Digital Int er f ace) Device 1. In order to enable S/PDIF , you hav e to turn it on. This can be done by opening the USB 3D Sound Configuration applet located in your system tra y . (click on the USB icon to open up the Configur ation Screen) 2.
Connecting to a Monitor or L C D Any monitor or LCD connected to the video port of the docking station will be limited to a maximum resolution of 1600x1200, 32-bit color . Video Menu Options Video menu options can be accessed by right-clicking on the T argus Display icon in the system tr ay or through the Windows Displa y Proper- ties.
Notebook Screen Secondary Monitor or LCD Primary: Off On Extended: On On Mirror: On On Off: On Off Video output will support the f ollowing r esolutions and color qualit y: NOTE: SOME LCDS HAVE BEEN OPTIMIZED FOR A SPECIFIC RESOLUTION. IF THE OPTIMUM RESOLUTION IS NOT 1280 X 1024, THE RESUL TS MAY NOT BE AS DESIRED.
Global Suspend Mode When your computer is in suspend mode, the doc king station also enters suspend mode to av oid power consumption. When your computer wakes up , the docking station wakes up automatically .
T r oubleshooting Device N ot W orking • Make sure that the de vice is fully inser ted into the correct port on the docking station. • Plug the device into a diff erent por t on the docking station. If it still doesn’t work, test the device b y connecting it directly to your computer .
F rom the Device Manager windo w , expand the f ollowing: • Display Adapters - T argus ExpressCard w/ video • Human Interface De vices - displays ke yboards and pointing devices: mice, trac kballs.
Video Can I get a higher resolution on my monitor? Movie pla yback is not smooth when play ed at 1600x1200x32 bit resolution. It is worse when pla ying a media clip in full screen? The T argus ExpressCard Docking station is not primar ily designed f or playing bac k movie content at maximum resolution and color depth.
My system crashes during boot up with the Card connector installed? Can two separate displa ys be connected to the ExpressCard Docking station (V GA and DVI-D) and displa y two separate images or work to extend the displa y across three screens (including the Notebooks screen)? No .
T echnical Support For technical questions , please visit: US Internet: www .targus.com/support.asp Austr alia Internet: www .targus.com/au Email: infoaust@targus .com T elephone: 1800-641-645 New Zealand T elephone: 0800-633-222 Pr oduct R egistr ation This device complies with P ar t 15 of the FCC Rules.
This equipment has been tested and found to comply with the limits of a Class B digital device , pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
デバイスTargus ACP60USの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Targus ACP60USをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTargus ACP60USの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Targus ACP60USの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Targus ACP60USで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Targus ACP60USを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTargus ACP60USの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Targus ACP60USに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTargus ACP60USデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。