TascamメーカーCD-01Uの使用説明書/サービス説明書
ページ先へ移動 of 26
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 1 TEAC Corporation TASCAM CD -0 1U/CD-01UPRO CONTROL I/O Terminals RS-232C Protocol Specifications Ver.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 2 TEAC Corporation 1. Overview The CD-01U/CD-01U PRO (here referred to as “ controlled device ”) functions can be controlled using a serial RS-232C connection from an external device, such as a computer.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 3 TEAC Corporation CD-01U/CD-01U PRO E xternal controller RXD TXD GND GND RXD TXD 2 3 5.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 4 TEAC Corporation 3. Command Format 3.1. Command Format Overview Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 … Byte n LF ID Command Data 1 Data 2 Data 3 Data 4 … CR The codes described here are transmitted in ASCII format (e.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 5 TEAC Corporation 3.3. List of Commands Control/Preset/Sense Command Return Command 88 TIME DATA 0F INFORMATION REQUEST 8F INFORMATION RETUR.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 6 TEAC Corporation Version up history Ver. 1.00: Released version. Ver. 1.02: Following commands to be added.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 7 TEAC Corporation 3.4. Command Sequence The CD-01U/CD-01U PRO does not have the “ ACK ” command for the each transport control command and data preset command.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 8 TEAC Corporation 4. Command Detail Commands, data, and machine IDs which are described here are represented in characters (ASCII). A command is a 2-byte character, a Machine ID is a 1-byte character, and each data is a 1-byte character.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 9 TEAC Corporation 4-6. SHUTTLE Performs the search function in SHUTTLE mode. SHUTTLE mode is maintained until the other command such as STOP, PLAY, or READY is received.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 10 TEAC Corporation 4-10. AUTO CUE LEVEL PRESET Sets the Auto Cue level of the controlled device. When this command is transmitted with request data ([FF ] ), the controlled device returns the AUTO CUE LEVEL RETURN command [A0].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 11 TEAC Corporation 4-12. PITCH CONTROL DATA PRESET Sets the Pitch Control value from – 12 . 5 % to +12. 5 % in 0.1% steps. When this command is transmitted with request data ([FF ] ), the controlled device returns the PITCH CONTROL DATA RETURN command [A5].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 12 TEAC Corporation 4-14. FADE IN/OUT TIME PRESET Sets the fade in and out time from 1 to 10 seconds in 1 second steps. When this command is transmitted with request data ([00FF ] or [01FF ] ), the controlled device returns the FADE IN/OUT TIME RETURN command [AE].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 13 TEAC Corporation 4-17. TIMER/ RESUME PLAY SELECT Turns the Power-on-play mode and Resume Play mode on and off . When this command is transmitted with request data ( [FF] ) , the controlled device sends the RESUME PLAY SELECT RETURN command [B4] .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 14 TEAC Corporation 4-20. REPEAT SELECT Sets the Repeat mode. When this command is transmitted with request data [FF], the controlled device returns the REPEAT SELECT RETURN command [B 7 ].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 15 TEAC Corporation 4-23. TIME DATA SEND SELECT Sets the Time mode of the time data that is sent out from the controlled device automatically (without any request command).
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 16 TEAC Corporation 4-27. ISRC SENSE Requests the output of the ISRC code of the current track (ready mode) or the catalog (stop mode). This data can only be output when a playback-only disc is loaded.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 17 TEAC Corporation 4-34. ERROR SENSE Should be transmitted by the external controller on receipt of an ERROR SENSE REQUEST [F0] from the controlled device , to determine the exact error. The contents of the reply are described in the ERROR SENSE RETURN command.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 18 TEAC Corporation 5. Return C ommand Detail 5-1. TIME DATA When the Time mode is set to other than “ OFF ” with TIME DATA SEND SELECT command [ 3 F ], controlled device outputs the time data in specified form by TIME DATA SEND SELECT command [ 3 F ].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 19 TEAC Corporation 5-4. PITCH CONTROL DATA RETURN Transmitted in response to a PITCH CONTROL DATA PRESET command [25] with the request data ( [ FF ] ) to show the currently set Pitch Control value .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 20 TEAC Corporation 5-8. TIMER/ RESUME PLAY SELECT RETURN Transmitted in response to a TIMER/ RESUME PLAY SELECT command [34] with the request data ( [ FF ] ) to show the currently set the Power-on-play/Resume function status .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 21 TEAC Corporation 5-12. INCR PLAY SELECT RETURN Transmitted in response to a n INCR PLAY SELECT command [3A] with the request data ( [ FF ] ) to show the currently set the Incremental Play function status .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 22 TEAC Corporation 5-16. MECHA STATUS RETURN Transmitted in response to a MECHA STATUS SENSE command [50] and gives the current mechanism status of the controlled device.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 23 TEAC Corporation 5-19. DISC STATUS RETURN Transmitted in response to a DISC STATUS SENSE command [56], giving the status of the loaded disc.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 24 TEAC Corporation 5-21. CURRENT TRACK TIME RETURN Transmitted in response to a CURRENT TRACK TIME SENSE command [58] , giving the specified form of the time data of the current track.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 25 TEAC Corporation 5-23. PGM TOTAL TRACK No./TOTAL TIME RETURN Transmitted in response to a PGM TOTAL TRACK No./TOTAL TIME SENSE command [5E] , giving the total number of the programmed tracks and the running time of the programmed tracks .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 26 TEAC Corporation 5-28. ERROR SENSE RETURN Transmitted in response to an ERROR SENSE command [78] , giving the specific error that has occurred.
デバイスTascam CD-01Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Tascam CD-01Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTascam CD-01Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tascam CD-01Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tascam CD-01Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tascam CD-01Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTascam CD-01Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tascam CD-01Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTascam CD-01Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
