TascamメーカーMD-CD1の使用説明書/サービス説明書
ページ先へ移動 of 56
» MD-CD1 Minidisc Deck/CD Player D00826820 B O WNER’S MANU AL Re2MD-CD1FrontCover 1 ページ ２００４年１１月４日 木曜日 午後８時２分.
— 2 TASCAM MD-CD1 Owner’s Manual IMPORTANT SAFETY PR ECAUTIONS TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
TASCAM MD-CD1 Owner’s Manual 3 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
4 TASCAM MD-CD1 Owner’s Manual SAFETY INFORMA TION DTA MD drive optical pickup: Type: KMS-260E Manufacturer: SONY Corporation Laser output: 4.55 mW Wavelength: 785+/-20 nm CD drive optical pickup: Type: KSS-575B Manufacturer: SONY Corporation Laser output: Less Than 0.
TASCAM MD-CD1 Owner’s Manual 5 Table of Contents Introduction Supplied accessories ............................................... 6 Environmental considerations ..................... 6 Rack-mounting the unit ........................................
6 TASCAM MD-CD1 Owner’s Manual 1 – Introduction Thank you for your purchase of the T ASCAM MD- CD1 MiniDisc Deck and CD Player . Before connecting and using the unit, please take time to read this.
1 – Introduction—Environmental considerations TASCAM MD-CD1 Owner’s Manual 7 Rack-mounting the unit Use the rack-mounting kit to mount the unit in a stan- dard 19-inch equipment rack, as sho wn below . Remov e the feet of the unit before mounting.
1 – Introduction—Environmental considerations 8 TASCAM MD-CD1 Owner’s Manual •K eep discs aw ay from direct sunlight, and places of high heat and humidity . If left in such places, warp- ing could result. • Do not af fi x any labels or stickers to the label side of the disc.
TASCAM MD-CD1 Owner’s Manual 9 2 – Remote control unit Some notes and pr ecautions • When the remote control will not be used for an extended period of time, please remo ve the batter - ies to pre vent the possibility of battery acid leakage which could damage the unit.
10 TASCAM MD-CD1 Owner’s Manual 3 – Connections Before connecting the MD-CD1 to other units, please read their operation manuals thoroughly to ensure proper connection.
TASCAM MD-CD1 Owner’s Manual 11 4 – Features and their functions Fr ont panel Shared featur es 1 Po wer switc h 2 Remote signal sensor 3 NO key Used to cancel menu operations dur- ing menu mode .
4 – Features and their functions—Front panel 12 TASCAM MD-CD1 Owner’s Manual C Display CD and MD data, deck operation mode, menus and other information are sho wn on the display .
4 – Features and their functions—Front panel TASCAM MD-CD1 Owner’s Manual 13 N OPEN/CLOSE ( ) key Press this ke y to open or close the CD tray . MD Operation O MD Menu ke y This turns the MD Menu mode on or of f. In MD Menu mode, the MD indica- tor fl ashes, MD Menu options are indicated on the display , and settings can be performed.
4 – Features and their functions—Display 14 TASCAM MD-CD1 Owner’s Manual T AL (OPTICAL) – OUTPUTS – MD terminals]. Even when the po wer is turned of f, the pitch control ON/OFF setting is retained.
4 – Features and their functions—Rear Panel TASCAM MD-CD1 Owner’s Manual 15 z DISC, GROUP , TRA CK display DISC lights up when the display master deck has a disc loaded and is stopped. GR OUP lights up when the display master is the CD deck and the Directory mode is on, or when the dis- play master is the MD deck and the group mode is on.
4 – Features and their functions—Remote Control Unit 16 TASCAM MD-CD1 Owner’s Manual Remote Contr ol Unit Shared operation keys MD operation keys / CD operation keys Shared operation keys The 1 ke y is used to select CD or MD deck opera- tion, while ke ys 2 and beyond are shared operation ke ys.
4 – Features and their functions—Remote Control Unit TASCAM MD-CD1 Owner’s Manual 17 B AU TO READ Y key This turns the Auto Ready Mode on and of f. When it is on, A READ Y lights up in the display . Refer to “ Auto ready (of a speci fi ed track)” on page 27.
4 – Features and their functions—Remote Control Unit 18 TASCAM MD-CD1 Owner’s Manual CD Operation Section L key During playback or playback standby , press this ke y continuously for revie w play- back (search). When an MP3 disc is in the deck during stop mode, if this ke y is pressed, the directory can be chosen (backward direction).
4 – Features and their functions—Remote Control Unit TASCAM MD-CD1 Owner’s Manual 19 When Group mode is on during stop mode, if this ke y is pressed, groups can be chosen (backward direction). Y key During playback or playback standby , press this ke y continuously for cue playback (search).
20 TASCAM MD-CD1 Owner’s Manual 5 – Display master and remote control master The MD-CD1 is equipped with a CD deck and an MD deck. Since the display and remote control ke ys can be used by either deck, this function determines which deck is represented by their operation.
TASCAM MD-CD1 Owner’s Manual 21 6 – Menu operation The v arious settings and editing operations possible with the MD-CD1 are performed through menu options sho wn on the display . Among the many menu setting options, some may be made directly using the ke ys on the remote control.
6 – Menu operation—Menu configuration 22 TASCAM MD-CD1 Owner’s Manual MD R_TIME Confirming total MD recording time “Data settings/service data” 49 MD Menu Menu option Function Manual refer .
6 – Menu operation—Operation basics TASCAM MD-CD1 Owner’s Manual 23 Operation basics 1 Select CD Menu or MD Menu Front panel operation: Press the CD MENU k ey or the MD MENU key to call up the desir ed menu.
24 TASCAM MD-CD1 Owner’s Manual 7 – CD and MD Playback The MD-CD1 can play both CDs and MDs. Basic playback and the operation of most playback func- tions are virtually identical for the CD and MD decks.
7 – CD and MD Playback—Display master and remote master set- TASCAM MD-CD1 Owner’s Manual 25 To remove the disc F or a CD, press the OPEN/CLOSE key . F or an MD, press the EJECT key . To play a desired track F ront panel operation: press either the or key to select the desired track.
7 – CD and MD Playback—Time Search function 26 TASCAM MD-CD1 Owner’s Manual Time Sear ch function By specifying time from the start of a certain track, you can start playback from a speci fi ed point of a speci fi ed track.
7 – CD and MD Playback—Auto Ready TASCAM MD-CD1 Owner’s Manual 27 Auto Cue function on and of f for each deck. (Default position: OFF) When the Auto Cue function is on, A_CUE is lit on the display . Even when the po wer is turned of f, the Auto Cue set- ting is maintained.
7 – CD and MD Playback—Continuous CD and MD playback 28 TASCAM MD-CD1 Owner’s Manual Continuous CD and MD playback W ith this function, when one deck fi nishes, the other deck begins play . 1 Tu rn on the CONT PLA Y switch on the front panel. 2 Play a CD or MD.
7 – CD and MD Playback—Single-track playback TASCAM MD-CD1 Owner’s Manual 29 Single-track playback This function enables playback of just a single track. During the Stop mode, press the P .MODE key on the remote control, and “SINGLE” lights up in the dis- play .
7 – CD and MD Playback—Random playback 30 TASCAM MD-CD1 Owner’s Manual NO TE Right after STOP , if the number of the track to be added is input, and the ENT/YES key is pressed, the track will be added to the end of the program.
7 – CD and MD Playback—End of disc/track warning TASCAM MD-CD1 Owner’s Manual 31 End of disc/track war ning When nearing the end of a track or disc, a warning indication is sho wn on the display .
7 – CD and MD Playback—MP3 file directory playback 32 TASCAM MD-CD1 Owner’s Manual Output volume The volume of the CD playback output signal can be adjusted. This adjustment functions for both for ana- log output (including headphone output) and digital output.
7 – CD and MD Playback—MD group playback TASCAM MD-CD1 Owner’s Manual 33 Y ou can also use the “DIR MODE?” option in the V OL FUNC sub-menu of the CD menu to turn this mode on or off . 2 During Stop mode, the CD SEARCH key on the remote contr ol can be used to select a directory .
34 TASCAM MD-CD1 Owner’s Manual 8 – Dubbing from CD to MD The MD-CD1 makes it easy to dub from CD to MD. Selected tracks or the entire disc can be dubbed. Basic dubbing operation First, load the CD to be used as the dubbing source into the CD deck, then insert a recordable MiniDisc into the MD deck.
8 – Dubbing from CD to MD—Dubbing speed setting TASCAM MD-CD1 Owner’s Manual 35 To listen while dubbing, select NORMAL. For faster dubbing, select HIGH. When Rec Speed is set to NORMAL, MD dubbing is possible e ven if the K ey Change or Pitch Control functions hav e been used for CD playback.
36 TASCAM MD-CD1 Owner’s Manual 9 – MD recording from an external source The MD-CD1 can not only dub from CD to MD, it also allo ws MD recording from other sound sources. Basic recor ding Set the recording mode and select the input source. While monitoring the input signal, adjust the record- ing le vel.
9 – MD recording from an external source—Recording cautions TASCAM MD-CD1 Owner’s Manual 37 To eject the disc from the deck, pr ess the EJECT key during stop mode. NO TE When “UTOC Writing!” is flashing on the display , data on the recorded contents is being written onto the disc.
9 – MD recording from an external source—Fade-in and fade-out 38 TASCAM MD-CD1 Owner’s Manual Fade-in and fade-out r ecording At the beginning and end of MD recording, f ade-in and fade-out ef fects can be performed.
9 – MD recording from an external source—Overwrite recording TASCAM MD-CD1 Owner’s Manual 39 Overwrite r ecording This function is used to record a ne w signal over a pre viously recorded but unwanted portion of the disc.
9 – MD recording from an external source—Checking remaining 40 TASCAM MD-CD1 Owner’s Manual Checking r emaining MD time During MD recording or recording standby mode, press the TIME k ey on eith.
TASCAM MD-CD1 Owner’s Manual 41 10 – MiniDisc editing T racks recorded can be deleted, mov ed, divided or combined by MiniDisc editing operation. Editing operations All MD editing functions are operated from the EDIT sub-menu on the MD menu. After selecting a menu option on the EDIT sub- menu, subsequent operation will v ary .
10 – MiniDisc editing—Erase disc 42 TASCAM MD-CD1 Owner’s Manual Selecting a track to be erased on the menu 1 1. In the stop mode, select the “ERASE TRK?” option on the EDIT sub-menu of the MD menu. “T rack>***” will be displayed, with *** rep- resenting the last track number .
10 – MiniDisc editing—Combine tracks TASCAM MD-CD1 Owner’s Manual 43 Combine tracks Tw o successiv e tracks can be combined into one track by deleting the track mark of the second track. Example: T o combine B and C NO TE Successive tracks recorded with different recording modes cannot be combined into a single track.
10 – MiniDisc editing—Creating a group 44 TASCAM MD-CD1 Owner’s Manual Cr eating a group The MD-CD1 enables tracks to be di vided into groups on a single MD disc for playback by group. Refer to “MD group playback” on page 33. A group is created by specifying track numbers of the “starting” track and the “ending” track.
TASCAM MD-CD1 Owner’s Manual 45 11 – Title input T itles can be gi ven to the MD disc, and the tracks and groups on it, using the TITLE sub-menu on the MD menu.
11 – Title input—Track title input 46 TASCAM MD-CD1 Owner’s Manual T rack title input Method 1 W ith this method, the tracks for title input are selected fi rst. 1 Put the deck in playback or playback standby mode on the track y ou wish to add a title.
TASCAM MD-CD1 Owner’s Manual 47 12 – Using a computer keyboard A computer ke yboard can be connected to the IBM PC compatible PS/2 interface on the front panel to operate certain functions of the MD-CD1. It is partic- ularly ef fi cient for title input.
12 – Using a computer keyboard—Other keyboard operations 48 TASCAM MD-CD1 Owner’s Manual Keyboard key Operation SHIFT + F1 MD EDIT “ERASE TRK” SHIFT + F2 MD EDIT “ERASE DISC” SHIFT + F3 .
TASCAM MD-CD1 Owner’s Manual 49 13 – Data settings / service data Data communication settings By connecting a PC through its RS-232C terminal to the MD-CD1 through its CONTR OL I/O (RS-232C) terminal, the two units can be linked for data e xchange.
50 TASCAM MD-CD1 Owner’s Manual 14 – System limitations CD section CD-R/R W discs that hav e not been fi nalized cannot be played back. Make sure the disc has been properly fi nalized before loading into the player .
14 – System limitations—MD section TASCAM MD-CD1 Owner’s Manual 51 Although tracks have been deleted, the remaining time on the MD disc does not increase. When the remaining time on an MD disc is dis- played, sections less than 12 seconds are ignored.
52 TASCAM MD-CD1 Owner’s Manual 15 – Message display glossary Operation messages Err or Messages Message Details / r esponse Blank Disc A blank recordable MD disc has been inserted. Ne w Disc! A new recordable MD disc has been inserted. Complete Editing operation has been successfully com- pleted.
15 – Message display glossary—Troubleshooting TASCAM MD-CD1 Owner’s Manual 53 Tr oubleshooting There is no power to the unit. Please check that the po wer cord is properly plugged in. “Disc Error!” is displayed. The disc may be dirty . Please replace the disc.
54 TASCAM MD-CD1 Owner’s Manual 16 – Specifications MD deck CD deck Rated input/output MD specifications CD specifications T ype MiniDisc recorder Discs MiniDisc f or mat Rec modes Stereo/Mono/L.
16 – Specifications—Dimensional drawing TASCAM MD-CD1 Owner’s Manual 55 Unit specifications For product improvement, specifications and external appearance are subject to change without notice. Due to product improvement, the actual unit may appear differently than the illustrations in the operation manual.
TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (323) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.
デバイスTascam MD-CD1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Tascam MD-CD1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTascam MD-CD1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tascam MD-CD1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tascam MD-CD1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tascam MD-CD1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTascam MD-CD1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tascam MD-CD1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTascam MD-CD1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
