Technicolor - ThomsonメーカーITC250の使用説明書/サービス説明書
ページ先へ移動 of 25
EN 1 Contents Chapter1: Getting started Important information ....................................................................2 Safety ....................................................................................................2 Care .....
EN 2 Chapter 1 Getting star ted Impor tant information Safety Ensure that y our domestic mains supply voltage matches the v oltage indicated on the identification stick er located at the back of your set. The TV set's components are sensitive to heat.
Getting star ted EN 3 What is DLP™ technology? Y ou hav e just bought a TV set equipped with DLP™ (Digital Light Processing) technology . This new technology uses a special lamp, a colour wheel an.
Getting star ted EN 4 Remote contr ol Most of your tele vision’ s functions are a vailable via the menus that appear on the screen. The remote contr ol supplied with your set can be used to na vigate through the menus and to configure all the general settings.
Getting star ted EN 5 Manual pr ogramming This method inv olves car r ying out a manual sear ch for the codes to be used for controlling y our other appliances.
Getting star ted EN 6 The Learning featur e The Learning featur e completes the programming pr ocedure described on page 4, as it enables you to r ecord the functionality of a specific button from the original r emote control to one of the TV’ s remote control buttons.
Getting star ted EN 7 Switching on F ollow the instructions on this page on ho w to switch on y our TV set and the remote control bef ore g oing on to the following pages that describe ho w to use the remote control and the channel set-up pr ocedure. 1.
EN 8 Initial set-up Initial set-up inv olves sear ching for and storing all the channels you can r eceive. Mak e sure that the tele vision is switched on and follow the six steps in turn specified on this page. The first time you s witch the television on, the language selection menu appears.
Channel set-up EN 9 Manual channel set-up F ollow the pr ocedure given on this page if y ou find that some channels hav e not been stored during the initial set-up . This can happen if you ar e setting up cable network channels. Setting up channels manuall y requir es every setting for a particular channel to be entered, one at a time .
EN 10 Switching the TV set on and off To s witch the TV set on, press the button located on the side of the set. The TV set tak es up to 40 seconds to come on.
Gener al oper ation EN 11 Demo mode This mode is used to highlight the benefits of the Hi Pix setting. Press the DEMO button on the r emote control to switch to Demo mode. The TV set alternates between on and off with the Hi Pix setting. Press the DEMO button as man y times as you need to exit Demo mode.
EN 12 Adjusting the sound Displa y the O VER VIEW menu by pr essing the MENU button. Select the Sound option and press OK to confirm. The SOUND menu appears with the follo wing options: Sound settings : see further below . Sound type : select a sound type from the list using the buttons.
Ad v anced functions EN 13 Graphic equaliser Select Graphic equaliser fr om the Sound menu and press OK to displa y the menu. This menu is used to select a pr eset parameter and define your o wn settings using the graphic equaliser .
Ad v anced functions EN 14 Advanced use Select the Advanced use option from the Pictur e menu and press OK to displa y the menu. The options are the following: Automatic format : automatically a pplies the appr opriate format to the picture. Check this box by pr essing OK to enable this function.
Ad v anced functions EN 15 Setting the time The TIME menu can be used to set the time on the TV set and program the automatic sleep timer or wak e-up timer functions. Displa y the O VER VIEW menu by pr essing the MENU button. Select the Time option and press OK to confirm.
Ad v anced functions EN 16 Pa r ental contr ol The parental contr ol functions allow you to limit y our children’ s access to the television. Y ou can do this by locking the buttons on the front of y our TV set, thereby barring access to certain channels and/or A V programmes.
Ad v anced functions EN 17 Whenev er you enable the par ental control function by defining a personal code y ou hav e to enter your code to access the Par ental control and Installation menus, ev en if there is no lock on. In the Pa r ental control menu the option is r eplaced by Deactivate parental contr ol .
Ad v anced functions EN 18 Customising y our television Pref erences Y ou can set prefer ences for some features. These prefer ences remain in f or ce as long as yo u do not change them. Press the MENU button to displa y the O VER VIEW menu. Select the Installation option and confirm by pr essing OK .
Ad v anced functions EN 19 Configuring A V sock ets Y ou can configure y our TV set according to the equipment you connect to it. Displa y the O VER VIEW menu using the MENU button. Select the Installation option and press OK to confirm. The Install menu appears.
Ad v anced functions EN 20 T eletext The T eletext ser vice is available in man y countries under a variety of names (T OP T ext, Fastext, FLOF text, Videotext).
Ad v anced functions EN 21 Other T eletext functions Newsflash When a newsflash is detected, the icon is replaced with a N in the na vigator . Select it and press OK to displa y the newsflash. In the case of an update , the T eletext function is enabled and displa ys the new information.
Ad v anced functions EN 22 Pr ogram Info (pr ogramme guide) The programme guide is onl y a vailable for channels which hav e been stored. The information it contains has been compiled by y our television based on T eletext information transmitted by the various channels, according to the ser vices they offer .
Ad v anced functions EN 23 Important : - Y ou can select up to 9 programmes to be stor ed/recor ded. - A message is displa yed when the memor y is full. Y ou then hav e to delete a programme to be able to store or r ecord another . - A message also appears when the times of some of the pr ogrammes you plan to r ecord or ha ve stored ov erlap.
EN 24 Chapter 5 Other informa tion Sock ets A V1 and A V2 SCAR T sockets (input-output) at the back. These sock ets can be used to connect a range of equipment, including video r ecorders, camcorders (VHS, S-VHS, 8 mm or Hi 8), decoders, satellite r eceivers, D VD play ers, games consoles or devices pr oducing an RGB signal.
Other informa tion EN 25 Connecting an amplifier Y ou can connect an amplifier and 2 speakers to r eplace your television’ s side speakers: Connect your tele vision’ s left L and right R CINCH sockets to the amplifier’ s L and R inputs.
デバイスTechnicolor - Thomson ITC250の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Technicolor - Thomson ITC250をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTechnicolor - Thomson ITC250の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Technicolor - Thomson ITC250の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Technicolor - Thomson ITC250で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Technicolor - Thomson ITC250を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTechnicolor - Thomson ITC250の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Technicolor - Thomson ITC250に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTechnicolor - Thomson ITC250デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。