TechnicsメーカーSA-DA10の使用説明書/サービス説明書
ページ先へ移動 of 52
A V Control Stereo Receiver Operating Instructions Model No . SA-DA10 SA-DA8 The photographs show the gold version of SA-DA8. Model SA-DA10 is only for the United Kingdom. The black version of SA-DA8 is only for the United Kingdom. Note: “EB” on the packaging indicates the United Kingdom.
RQT5518 2 Table of contents Caution for AC Mains Lead ............................................. 3 Safety precautions ........................................................... 4 To enjoy surround sound ............................................
3 RQT5518 Before use Caution for AC Mains Lead CA UTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.
RQT5518 4 Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.
5 RQT5518 To enjoy surround sound 30 ° 30 ° 120 ° 30 ° 30 ° 120 ° Before use Do the connections, settings, and adjustments in the order shown to enjoy surround sound.
RQT5518 6 Front panel controls SPEAKERS A B BI-WIRE BI-AMP VOLUME MIN MAX DIGITAL INPUT SELECTOR TUNING PRESET MEMORY BAND FM MODE DSP SOUND MODE DVD 6CH INPUT VGCA ON VIA TONE MIN MAX MIN MAX L R BAL.
7 RQT5518 TUNED STEREO MONO LOW IMP SPEAKERS EON PS PTY RT AAC kHz MHz PRO LOGIC PROGRAM FORMAT DIGITAL SLEEP SOUND MODE STEREO SURROUND SFC LC R LS S LFE RS SUB- WOOFER M RDS AB BI-WIRE WAKE 29 30 32 33 34 35 36 38 31 37 39 40 41 43 42 44 45 46 Display section No.
RQT5518 8 Front panel controls No. Name Ref.page Remote control SA-DA10 $7 $7 $7 $7 $7 Standby/on button ( ) .................................... 39 $8 $8 $8 $8 $8 Input select buttons (TV, VCR, DVD, TAPE, CD, TUNER/BAND, MD) ..... 39 $9 $9 $9 $9 $9 Numbered buttons .
9 RQT5518 A B C 3 1 2 1 2 3 SA-D A10 SA-D A8 (R6, AA, UM-3) (R6, AA, UM-3) Remote control signal sensor Transmission window About 7 meters in front of the signal sensor.
RQT5518 10 LOOP ANT HOLDER FM ANT 75 Ω EXT AM ANT GND OPTICAL OPTICAL RL IN IN IN IN IN IN OUT OUT VCR 2 VCR 1 REC (OUT) PLAY (IN) IN FRONT SURROUND CENTER LF HF + – + – A BI-WIRE DIGITAL CD TV .
11 RQT5518 LOOP ANT HOLDER FM ANT 75 Ω EXT AM ANT GND OPTICAL OPTICAL FRONT RL SUBWOOFER IN CENTER SURROUND R SURROUND L IN REC (OUT) PLAY (IN) IN IN FRONT SURROUND CENTER LF HF + – + – AC IN A .
RQT5518 12 LOOP ANT HOLDER FM ANT 75 Ω EXT AM ANT GND OPTICAL OPTICAL OPTICAL FRONT RL SUBWOOFER IN CENTER SURROUND R SURROUND L RL IN IN IN IN IN IN IN OUT OUT VCR 2 VCR 1 REC (OUT) PLAY (IN) DIGIT.
13 RQT5518 IN IN FRONT SURROUND CENTER LF HF + – + – AC IN A BI-WIRE VCR 1 TV DVD S-VIDEO LRL LRL RL RL MONITOR OUT FM ANT 75 Ω EXT AM ANT GND OPTICAL FRONT RL SUBWOOFER IN CENTER SURROUND R SUR.
RQT5518 14 LOOP ANT HOLDER FM ANT 75 Ω EXT AM ANT GND OPTICAL OPTICAL OPTICAL FRONT RL SUBWOOFER IN CENTER SURROUND R SURROUND L RL IN IN IN IN IN IN IN OUT OUT VCR 2 VCR 1 REC (OUT) PLAY (IN) IN IN.
15 RQT5518 LOOP ANT HOLDER FM ANT 75 Ω EXT AM ANT GND OPTICAL OPTICAL OPTICAL FRONT RL SUBWOOFER IN CENTER SURROUND R SURROUND L RL IN IN IN IN IN IN IN OUT OUT VCR 2 VCR 1 REC (OUT) PLAY (IN) IN IN.
RQT5518 16 LOOP ANT HOLDER FM ANT 75 Ω EXT AM ANT GND OPTICAL OPTICAL OPTICAL FRONT RL SUBWOOFER IN CENTER SURROUND R SURROUND L RL IN IN IN IN IN IN IN OUT OUT VCR 2 VCR 1 REC (OUT) PLAY (IN) IN IN.
17 RQT5518 1 2 3 12 3 - 1 3 - 2 3 - 3 SPEAKERS AB SPEAKERS AB SPEAKERS AB INPUT SELECT OR 2 1 3 Speaker settings These settings should be done to get the most from the unit’s DSP reproduction modes ( a pages 20 and 21). In SIZE Set the type (LARGE or SMALL) and presence (NONE, YES or NO) of your speakers.
RQT5518 18 5 4 6 4 - 1 4 - 2 4 - 3 6 5 - 1 5 - 2 SPEAKERS AB SPEAKERS AB INPUT SELECT OR 2 1 3 SPEAKERS AB INPUT SELECT OR 1 2 SPEAKERS AB Preparatory steps 4 T o set “DIST ANCE” 1 1 1 1 1 Press [A] to select “DIST ANCE”. 2 2 2 2 2 Press [B] to select the speaker channel to be set.
19 RQT5518 2 1 3 4 5 SA-DA10 SA-DA8 1 BALANCE TOP MENU DISPLAY DVD ENTER MENU STEREO DELAY SURROUND SFC TEST MUTING DIMMER VOL TV VOL TV/AV 12 3 DIRECT TUNING/ DISC ENTER 456 ≥ 10/–/– – 7 890 .
RQT5518 20 A B DSP SOUND MODE DSP SOUND MODE DSP SOUND MODE PROGRAM FORMAT SOUND MODE L C R LS S LFE RS STEREO Dolby Pro Logic Dolby Digital DTS PROGRAM FORMAT SOUND MODE SURROUND L C R LS S LFE RS PR.
21 RQT5518 DIGIT AL INPUT DSP SOUND MODE DISPLAY ENTER MENU STEREO DELAY SURROUND SFC TEST MUTING DIMMER VOL TV VOL TV/AV 12 3 DIRECT TUNING/ DISC ENTER 456 ≥ 10/–/– – 7 890 + – + – LEVEL .
RQT5518 22 2 1 3 4 5 12 3 4 5 DIGIT AL SPEAKERS AB BI-WIRE INPUT SELECT OR DIGIT AL INPUT DSP SOUND MODE SPEAKERS A TAPE/MD (TAPE) VCR 1 CD DVD VCR 2 TV PHONO TUNER S PROGRAM FORMAT SOUND MODE SURROUND LC R LS S LFE RS Enjoying the sounds Preparation: Set [VOLUME] to the “MIN” position.
23 RQT5518 6 8 8 TAPE MD CD TOP MENU DISPLAY DVD ENTER MENU STEREO DELAY SURROUND SFC TEST MUTING DIMMER VOL TV VOL TV/AV 12 3 DIRECT TUNING/ DISC ENTER 456 ≥ 10/–/– – 7 890 + – + – LEVEL .
RQT5518 24 A B C SPEAKERS A, B BI-WIRE BI-AMP T APE MONIT OR SPEAKERS AB BI-WIRE BI-AMP SPEAKERS AB BI-WIRE T APE MONITOR SPEAKERS BI-WIRE LOW IMP SPEAKERS A C Enjoying the sounds T o enjo y bi-amp so.
25 RQT5518 A B C VCR 2 VCR 3 BASS TREBLE BALANCE MIN MAX MIN MAX TREBLE BASS LR BALANCE VCR 2 VCR 3 Enjoying the sounds C T o adjust the tone quality T urn [BASS] to adjust the bass. T urn [TREBLE] to adjust the treble. T o adjust the sound balance T urn [BALANCE] to adjust the left/right sound balance.
RQT5518 26 2 1 1 2 INPUT SELECT OR D VD 6CH INPUT Switching DVD analogue input Use analogue input to enjoy the high-quality, 96 kHz or 192 kHz linear PCM and multiple channel linear PCM audio found on some DVD-Video and DVD-Audio. Select the analogue input mode to suit the source.
27 RQT5518 1 1 2 ON VIA TONE INPUT SELECT OR V GCA ON R S R S VGCA mode This unit features a state-of-the-art variable gain control amplifier (VGCA). This feature cuts down greatly on noise encountered during normal use. 1 T urn [INPUT SELECTOR] to select the source.
RQT5518 28 2 1 3 Selected band 1 3 2 VGCA FM MODE, EON INPUT SELECT OR BAND TUNING PTY SELECT OR MHz TUNED STEREO SPEAKERS MHz A Use the tuning buttons to tune-in radio stations. 1 T urn [INPUT SELECTOR] to select “TUNER”. 2 Press [B AND] to select “FM” or “AM”.
29 RQT5518 2 1 3 Selected band TV VCR TAPE MD CD TUNER/ BAND TOP MENU DISPLAY DVD ENTER MENU STEREO DELAY SURROUND SFC TEST MUTING DIMMER VOL TV VOL TV/AV 12 3 DIRECT TUNING/ DISC ENTER 456 ≥ 10/–.
RQT5518 30 2 A 4 2,4 MEMOR Y PTY SEARCH PTY SEARCH MEMOR Y M M M The radio Preset tuning Presetting radio stations into the memory channels of this unit makes selecting stations simple.
31 RQT5518 2 3 4 A B 2 2 1 1 3 2,4 2 1 FM MODE, EON MEMOR Y PTY SEARCH TUNING PTY SELECT OR MEMOR Y PTY SEARCH PRESET DISPLA Y MODE TUNING PTY SELECT OR M M SPEAKERS A TUNED STEREO SPEAKERS MHz A E O MHz 1 2 Manual memory presetting The desired stations can be preset into the desired channels by the user.
RQT5518 32 1 2 2 1 RDS PRESET DISPLA Y MODE TUNED STEREO SPEAKERS MHz RDS A TUNED STEREO SPEAKERS MHz RDS A TUNED STEREO SPEAKERS PS RDS A TUNED STEREO SPEAKERS PTY RDS A TUNED STEREO SPEAKERS RT RDS A 1 2 3 4 RDS broadcasts Only for the United Kingdom RDS (Radio data system) is a multiplex broadcasting system.
33 RQT5518 1 2 3 3 2 1 RDS TUNING PTY SELECT OR PTY SEARCH MEMOR Y TUNED STEREO SPEAKERS MHz RDS A TUNED STEREO SPEAKERS PTY RDS A TUNED STEREO SPEAKERS PTY RDS A RDS broadcasts Only for the United Ki.
RQT5518 34 1 2 3 1 2 3 RDS TUNING PTY SELECT OR EON FM MODE TUNED STEREO SPEAKERS MHz RDS A TUNED STEREO SPEAKERS PTY RDS A TUNED STEREO SPEAKERS PTY RDS A EON RDS broadcasts Only for the United Kingdom EON tuning EON tuning is useful if the type of program you want to listen is not currently being broadcast.
35 RQT5518 RDS broadcasts Only for the United Kingdom About the PTY display There are a total of 31 PTY displays on this unit. The display changes each time [TUNING, , , PTY SELECTOR] is pressed. The table below shows the order in which the display changes, and also gives an explanation of each display.
RQT5518 36 A B Headphones (not included) SPEAKERS A, B INPUT SELECT OR V OLUME PHONES PHONES 3 1 2 V OLUME MIN MAX SPEAKERS AB SPEAKERS AB SPEAKERS AB INPUT SELECT OR 1 2 3 4 B Other functions T o listen through headphones q q q q q Reduce the v olume.
37 RQT5518 A B TV VCR TAPE MD CD TUNER/ BAND TOP MENU DISPLAY DVD ENTER MENU STEREO DELAY SURROUND SFC TEST MUTING DIMMER VOL TV VOL TV/AV 12 3 DIRECT TUNING/ DISC ENTER 456 ≥ 10/–/– – 7 890 +.
RQT5518 38 The remote control SA-D A10 SA-D A8 + – 1 4 7 0 -/-- 89 56 23 TV VCR TAPE CD TUNER/BAND DVD CH DIRECT TUNING/ DISC ENTER VOLUME MUTING ≥ 10/ENTER DISC/DECK 1/2 MD SOUND MODE SFC SLOW/ S.
39 RQT5518 T o operate the receiver To switch between on and standby To select an input source (except PHONO and VCR 2/ FRT-VCR 3) and switch the remote control to each operation mode To turn SFC on a.
RQT5518 40 SA-D A10 SA-D A8 + – 1 4 7 0 -/-- 89 56 23 TV VCR TAPE CD TUNER/BAND DVD CH DIRECT TUNING/ DISC ENTER VOLUME MUTING ≥ 10/ENTER DISC/DECK 1/2 MD SOUND MODE SFC SLOW/ SEARCH DELAY TOP MEN.
41 RQT5518 T o operate a cassette deck T o operate a CD play er or MD dec k To turn the CD player ON/OFF To turn the MD deck ON/OFF Only for the United Kingdom To start play from the desired track To .
RQT5518 42 The remote control SA-D A10 SA-D A8 + – 1 4 7 0 89 56 23 TV VCR TAPE CD TUNER/BAND DVD CH DIRECT TUNING/ DISC ENTER VOLUME MUTING ≥ 10/ENTER DISC/DECK 1/2 MD SOUND MODE SFC SLOW/ SEARCH.
43 RQT5518 (Example: Channel 1) (Example: Channel 10) within 10 seconds T o watch TV broadcasts To turn the TV ON/OFF To select the TV/AV mode To turn the VCR player ON/OFF To start play To select the.
RQT5518 44 The remote control SA-D A10 SA-D A8 + – 1 4 7 0 -/-- 89 56 23 TV VCR TAPE CD TUNER/BAND DVD CH DIRECT TUNING/ DISC ENTER VOLUME MUTING ≥ 10/ENTER DISC/DECK 1/2 MD SOUND MODE SFC SLOW/ S.
45 RQT5518 T o operate a D VD pla yer To turn the DVD player ON/OFF To start play To display the GUI menu icons To select items To enter the selected items To display the subtitle icon To display the .
RQT5518 46 T o change the remote control code Hold down the button corresponding to the component you wish to operate. Continue to hold the button down and... Aim the remote control at the component you wish to operate and carefully and slowly press the numbered buttons to enter the appropriate two- digit code number.
47 RQT5518 Remote control PANASONIC AKAI ALBA BAUR BLAUPUNKT BRANDT BUSH DAEWOO DUAL FERGUSON FINLUX FISHER FUNAI GOLDSTAR GOODMANS GRUNDIG HITACHI ICE 01, 29, 30, 31 07, 11, 28, 36, 37 05, 11, 12 32 .
RQT5518 48 1 A B 2 1 2 TAPE MONITOR VCR 3 INPUT SELECT OR VCR 2 VCR 3 T APE MONITOR Making a recording Note ¡ You cannot record a source connected through a digital terminal.
49 RQT5518 Reference 1 2 3 3 1,2 W AKE TIMER -MODE –TIME SLEEP WAKE TIMER -MODE –TIME TUNED STEREO SPEAKERS MHz A WAKE WAKE Timer function There are two timer functions: the sleep timer and the wake timer. ¡ Sleep timer: The unit turns off after a set time.
RQT5518 50 Troubleshooting guide Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
51 RQT5518 Unit doesn’t come on. Sound is not heard. Sound suddenly stops or none is heard when the unit is switched on. “OVERLOAD” appears on the display. The AC mains lead plug is not fully inserted. The speaker indicators are off. The muting function is on.
AMPLIFIER SECTION Power output (at 240 V) DIN 1 kHz (T.H.D. 1 %) 2 x 100 W (6 Ω ) 20 Hz–20 kHz continuous power output both channels driven 2 x 80 W (6 Ω ) Total harmonic distortion rated power at 20 Hz–20 kHz 0.09 % (6 Ω ) half power at 1 kHz 0.
デバイスTechnics SA-DA10の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Technics SA-DA10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTechnics SA-DA10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Technics SA-DA10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Technics SA-DA10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Technics SA-DA10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTechnics SA-DA10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Technics SA-DA10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTechnics SA-DA10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
