TelectメーカーT3の使用説明書/サービス説明書
ページ先へ移動 of 20
® CONNECTING THE FUTURE ® DIGITAL NETWORK INTERFACE PANEL—64 CIRCUITS (DNI-3) USER MANUAL 108469 Issue A Rev 2.
ii 108469 Issue A Rev 2 Digital Network Interface Panel (DNI- 3) User Manual Document Number 108469 Issue A Rev 2 Copyright© T elect, Inc., 1998, All Rig hts Reserved. T elect and Connectin g the Fu ture are reg istered trademarks of T elect, Inc.
Issue A Rev 2 108469 Telect, Inc. iii Content s 1 D escriptio ns Digital Network Interface Panel .................................................. 1- 1 Capabilities ............................................................................ 1-1 Features .
iv Telect , Inc. 108469 Issue A Rev 2 5 Service Owner Maintenance ..................................................................... 5-1 In Case Of Diff iculty ................................................................... 5-1 In-W arranty Service .
Issue A Rev 2 108469 Telect, Inc. 1-1 D IGIT A L N ETWORK I NTERFAC E P ANEL T elect’ s DNI-3 is a multifunction support panel for DS3 telecommunica- tions networks. It is an accessible and centralized interconnect point be- tween digital cross-connect systems (DCSs) and central office network ele- ments (NEs).
Descrip tions DNI-3 User Manual 1-2 Telect , Inc. 108469 Issue A Rev 2 S YSTEM -L EVEL A PPLIC ATIONS This illustration shows a DNI-3 within a typical telecommunications net- work. M AIN A SSEMBLIES P HYSICAL S PECIFICATIO NS H x W x D: 5.25 x 23.0 x 10.
Issue A Rev 2 108469 Telect, Inc . 2-1 I NST ALLA TION C ONSIDERA TIONS Location and Space The DNI-3 panel mounts flush into both unequal-flange and equal- flange (EIA or WECO) 23" (58.4 cm) network bays. The primary limiting factor of a DNI-3 rack c onfiguration is the number of cables a network bay can accommodate.
Installation DNI -3 User Manual 2-2 Telect , Inc. 108469 Issue A Rev 2 In the above table, t he first shaded row is the capacity for a 7-ft bay . The second shaded row is the capacity for an 8-ft bay; the last shaded row is for an 1 1.5-ft bay . Network Bay Extender Panel Each network bay extender panel provides 81 square inches (522.
DNI-3 User M anual Installatio n Issue A Rev 2 108469 Telect, Inc . 2-3 I NSPECTION Compare the contents of the DNI-3 shipping container with the packing list. Call T elect if you are missing anything. NOTE T elect is no t liable for shipping damage. If the shipping container is damaged, keep it for the carrier ’ s inspection.
Installation DNI -3 User Manual 2-4 Telect , Inc. 108469 Issue A Rev 2 7. St arting at the lowest DNI-3 panel and working upward, connect the DCS OUT cables to the NE-1 OUT terminat ion points on the rear of the DNI-3 panels. 8. Secure the DCS OUT cable s to the wire management tray via the tie-down slots.
Issue A Rev 2 108469 Telect, Inc . 3-1 D AT A S IGNALS The DCS circ uit cables terminate at the lowe r pair of termina tion points on the rear of the DNI-3 panel, labele d NE-1. The OUT cable connect s to the upper NE-1 termination point and the IN ca ble connects to the lower NE-1 termination point.
Electric al Operati on DNI-3 Us er Manual 3-2 Telect , Inc. 108469 Issue A Rev 2 Inserting a Mini-WECO patch cord into the upper monitor T wist Lok Jac k (TLJ) on the front of the DNI-3 pane l accesses the NE circuit. Inserting a Mini-WECO patch cord into the lower monitor TLJ on the front of the DNI-3 pane l access es the DCS ci rcuit.
Issue A Rev 2 108469 Telect, Inc. 4-1 I N -S ERVICE P ATCH ING T o temporarily connect an N E or DCS circuit to an alternate DCS or NE circuit on the same or a different DNI-3 panel or DSX without dis.
User Functi ons DNI-3 User Manual 4-2 Telect , Inc. 108469 Issue A Rev 2 4. Using a fourth Mini-WECO patch cord: a. Insert the plug of one end into BOR position 2, OUTPUT . b. Insert the plug of the other end into the IN TLJ at the first loca- tion. 5.
DNI-3 User M anual User Functions Issue A Rev 2 108469 Telect, Inc. 4-3 St e p A c t i o n 1. Using one Mini-WECO patch cord: a. Insert the plug of one end into the IN TLJ at the first location. b. Insert the plug of the other end into the OUT TLJ at the second location.
User Functi ons DNI-3 User Manual 4-4 Telect , Inc. 108469 Issue A Rev 2 St e p A c t i o n 1. T o monitor t he NE cir cuit outputs, insert a Mini-WECO patch cord into the NE (upper) Monitor TLJ. T o monitor t he DCS cir cuit outputs, insert a Mini-WECO patch cord into the DCS (lo w er) M onitor TLJ.
Issue A Rev 2 108469 Telect, Inc. 5-1 O WNER M AINT ENANCE T elect’ s DNI-3 does not need preve ntive maintenance. I N C ASE O F D IFFICULTY If problems occur after initial instal lation, check all cable connections and the installation instructions in Section 2.
Serv ice DNI-3 Us er Manual 5-2 Telect , Inc. 108469 Issue A Rev 2 O UT -O F -W ARRAN TY S ERVICE The procedure for out-of -warranty service is the same as for in-wa rranty service, except that T elect char ges a processing fee, and you must submit a Purchase Order along with a Return Material Authorization (RMA) before returning equipment.
.
® ® CONNECTING THE FUTURE DIGITAL NETWORK INTERFACE P ANEL—112 CIRCUITS (DNI-1) USER MANUAL 108165 Issue A Rev 1 Telect, Inc. 1730 N. Madson St. P .O. Box 665, Liberty Lake, WA 99019 509-926-6000, 800-551-4567, Fax 509-926-8915 E-mail: getinfo@telect.
デバイスTelect T3の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Telect T3をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTelect T3の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Telect T3の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Telect T3で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Telect T3を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTelect T3の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Telect T3に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTelect T3デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。