Texas InstrumentsメーカーTI-36Xの使用説明書/サービス説明書
ページ先へ移動 of 48
Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 0 of 48 TI-36X ý Scientific Calculator USER’S GUIDE 2000, 2003 Texas Instruments Incorporated education.
Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 0 of 48 Table of Contents Turning the Calculator On and Off............................ 1 Alternate Functions.........................................
1 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 1 of 48 Turning the Calculator On and Off The TI-36X ü is battery powered. • To turn on the TI - 36X ü , press T . • To turn off the TI - 36X ü , press %r .
2 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 2 of 48 Display The TI-36X ü has a two-line display. The first line ( Entry Line ) displays an entry of up to 88 digits or items (47 for Stat or Stored Operations).
3 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 3 of 48 Menus Some key presses access menus: S , R , e , - , 8 , & , / , . , %q , %p , %d , %^ , %m , %] , %6 , %f , %h , %Z , %t , % , and %s .
4 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 4 of 48 Clearing, Correcting, and Resetting Key Action 4 Action depends on position of the cursor. • If cursor is in the middle of an entry, clears character under the cursor and all characters to the right of the cursor.
5 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 5 of 48 Display Indicators Special indicators may appear in the display to provide additional information about functions or results. Indicator Meaning 2nd 2nd function is active.
6 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 6 of 48 Order of Operations The TI-36X ü uses EOS è (Equation Operating System) to evaluate expressions. Order Evaluation 1st Expressions inside parentheses.
7 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 7 of 48 Basic Operations As you press keys, numerals, operators, and results appear on the display. H , ? , @ , A , B , C , D , E , F , G Enters numerals 0 through 9.
8 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 8 of 48 ³ Examples 5 < 9 : 6 ; 2 V 5 è 9+6-2 ß 49. 5 <N 9 : 6 O; 2 V 5 è (9+6)-2 ß 73. W 8 8 7 < Ans ñ 8.7 ß 8.390804598 %t"""" F0123 456789 V Ans ñ 8.
9 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 9 of 48 Percent To calculate a percent, press %l after entering a value. ³ Problem A mining company mines 5000 tons of ore having a 3-percent concentration of metal, 7300 tons having a 2.
10 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 10 of 48 Fractions Fractional calculations can display fractional or decimal results.
11 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 11 of 48 Exponents, Roots, and Reciprocals P Calculates the square of a value. K Raises a value to any power within the range of the calculator. If the number is negative, the power must be an integer.
12 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 12 of 48 Notation %Z displays the Numeric Notation mode menu. • FLO (default): Displays results in floating notation, with digits to the left and right of the decimal point.
13 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 13 of 48 Pi 5 enters the value of p . It is stored internally to 13 digits ( 3.141592653590 ) and displayed to 10 digits ( 3.141592654 ). When multiplying p by a number, you do not need to press < ; multiplication is implicit.
14 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 14 of 48 Memory The TI - 36X ü has five memory variables. You can store a real number or an expression that results in a real number to a memory variable.
15 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 15 of 48 In addition to serving as a memory variable, E stores a seed value to generate a random number when you are using the Probability function (see page 32).
16 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 16 of 48 Stored Operations The TI-36X ü stores two operations, Op1 and Op2 . To store an operation to Op1 or Op2 and recall it: 1. Press %b or %c .
17 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 17 of 48 ³ Examples %b< 2 V OP1= è 2 3 2 3 è 2 ß 16 . 2 6 è 2 ß 2 12. 2 12 è 2 ß 3 24. %c: 5 V OP2=+5 10 3 10+5 ß 1 15. 3 15+5 ß 2 20.
18 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 18 of 48 Logarithms %d displays a menu of log functions. log Yields the common logarithm of a number. 10 ^ Raises 10 to the power you specify. ln Yields the logarithm of a number to the base e (e= 2.
19 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 19 of 48 ³ Problem A radioactive substance decays exponentially. If y o grams of certain radioactive substance are initially present, the number of grams y(t) after t days is given by the formula: y(t)=y o e -0.
20 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 20 of 48 Trigonometric Functions e displays a menu of the trigonometric functions ( sin , sin -1 , cos , cos -1 , tan , tan -1 ). Press " or ! to select the desired function, enter the value, and close the parentheses with O .
21 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 21 of 48 ³ Problem Find angle a in the right triangle below. Then find the length of the hypotenuse h and angle b. Measurements of length and height are in meters.
22 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 22 of 48 Angle Modes / displays a menu to specify the angle unit modifier for an entry: degrees ( é ), radians ( r ), grads ( g ), or DMS ( é ê ë ).
23 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 23 of 48 & displays a menu ( DEG RAD GRD ) to express angle measurements in degrees (default), radians, or grads, respectively. ³ Problem You probably know that 30 é = å /6 radians.
24 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 24 of 48 Rectangular / Polar %^ displays a menu to convert rectangular coordinates (x, y) to polar coordinates (r, æ ) or vice versa.
25 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 25 of 48 Hyperbolic Functions %m displays a menu of hyperbolic functions ( sinh , sinh -1 , cosh , cosh -1 , tanh , tanh -1 ). Angle modes do not affect hyperbolic calculations.
26 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 26 of 48 Metric Conversions Press . to access a menu of 20 conversions from the metric system into the English system and vice versa. Scroll through the choices with " and ! and select with V .
27 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 27 of 48 ³ Problem Convert 10 kilometers into miles. Then convert 50 miles into kilometers. Round results to two decimal places. 10 .""" Ý km ò mile & VV%t 2 10 km Þ mile ß 6.
28 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 28 of 48 Physical Constants Press %] to access a menu of 16 physical constants. Scroll through the choices with " and ! . Constant Value c speed of light 299792458 meters per second g gravitational acceleration 9.
29 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 29 of 48 ³ Problem A brick falls off the roof of a building and hits the sidewalk 3.5 seconds later. Find the height of the building in meters and then in feet, rounded off to the nearest whole number.
30 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 30 of 48 Integrals The TI-36X ü performs numerical integration using Simpson ’ s Rule.
31 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 31 of 48 ³ Problem Find ⌡ ⌠ 0 å /2 sin a + cos a da , using 10 intervals. Solve the problem again, using 20 intervals. &"V 0 SV 0 Þ A ß 0.
32 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 32 of 48 Probability Press %6 to access a menu of functions. nPr Calculates the number of possible permutations of n items taken r at a time. The order of objects is important, as in a race.
33 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 33 of 48 ³ Problem Compute n! r!(n-r)! where n=52 and r=5. 52 %6"" nPr nCr ! Þ V 52! ß =N 5 %6""V< N 52 ; 5 O%6""O V 52! ñ (5! è (52 & ß 2598960.
34 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 34 of 48 Statistics %f displays a menu. 1-VAR Analyzes data from 1 set of data with 1 measured variable: x. LIN Analyzes paired data with 2 measured variables: x , the independent variable, and y , the dependent variable.
35 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 35 of 48 To set up the problem and perform the analysis: 1. Press %f . Select the desired type of analysis from the menu and press V . The STAT indicator displays.
36 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 36 of 48 7. When finished: • Press %f and select CLRDATA to clear all data points without exiting STAT mode, or • Press %h to access the following menu.
37 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 37 of 48 ³ Problem The table below gives the Gross Domestic Product per capita and the telephone density (main lines per 100 population) for several countries in a recent year.
38 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 38 of 48 8!!!!! Ý ÷ xy a b r Þ 3.5143 " Ý ÷ xy a b r Þ 0.0019 " Ý ÷ xy a b r Þ 0.9374 "" Ý x' y' 10695 OV%t 2 y'(10695) 24.
39 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 39 of 48 Boolean Logic Operations Press - to access a menu of Boolean Logic operations.
40 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 40 of 48 Number-System Modes Number system modes are second functions of keys. %| Selects decimal mode (default). When the calculator is in another number mode, press %| to return the calculator to decimal mode.
41 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 41 of 48 ³ Problem Add 456+125 in base 8 and in hexadecimal. Then return the calculator to decimal mode and do the same addition. %~ 456 : 125 V 456+125 ß 603 %}#V 456+125 ß 57b %|#V 456+125 ß 581.
42 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 42 of 48 Press % to access a menu. conj Returns the conjugate of a complex number. real Returns the real part of a complex number. imag Returns the imaginary part of a complex number.
43 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 43 of 48 Error Conditions When Error appears in the display, the calculator will not accept a keyboard entry until you press 4 or %r .
44 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 44 of 48 DOMAIN - You specified an argument to a function outside the valid range. For example: • For x ‡ : x=0; y<0 and x not an odd integer.
45 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 45 of 48 In Case of Difficulty Review instructions to be certain calculations were performed properly. Press T and 4 simultaneously to reset. When released, memory and settings are cleared, and MEM CLEARED is displayed.
46 Ti36eng1.doc TI-36X II Manual Linda Bower Revised: 01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 46 of 48 Service Information TI Product and Services Information For more information about TI products and services, contact TI by e-mail or visit the TI calculator home page on the world-wide web.
デバイスTexas Instruments TI-36Xの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Texas Instruments TI-36Xをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTexas Instruments TI-36Xの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Texas Instruments TI-36Xの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Texas Instruments TI-36Xで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Texas Instruments TI-36Xを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTexas Instruments TI-36Xの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Texas Instruments TI-36Xに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTexas Instruments TI-36Xデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
