ThomsonメーカーTHS812の使用説明書/サービス説明書
ページ先へ移動 of 27
Evolution. Emotion. Passion www .thomsonstb.net THS 812 Di gi tá ln í sa te li tn í př ij ím ač pr o vy so ká ro zl iš en í ob ra zu Návod k obsluze Používateľská príručka User manual.
.
.
P1 English T ABLE OF CONTENTS 1.0 INTRODUCTION 2 1.1 Safety Instructions 2 1.2 Storage 3 1.3 Equipment Set-up 3 1.4 Accessories 3 1.5 Usage of external USB devices 3 2.0 Y OUR RECEIVER 4 2.1 Default PIN-code 4 2.2 Master MR PIN-code 4 2.3 Front Panel 4 2.
P2 INTRODUCTION LICENSES ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THA T COMPLIES WITH THE MPEG-2 ST ANDARD FOR ENCODING VIDEO INFORMATION FOR P ACKAGED MEDIA IS EXPRESSL Y PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE P A TENTS IN THE MPEG-2 P A TENT PORTFOLIO, WHICH LICENSE IS AV AILABLE FROM MPEG L A, LLC , 6312 S.
INTRODUCTION P3 English Safety P recautions Never open the receiver cover . It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards and your warranty will be void. Refer all maintenance or servicing to suitably qualified personnel.
P4 Y OUR RECEIVER Please ensure that either the USB device is already formatted to F A T32. 2.0 Y OUR RECEIVER 2.1 Default PIN-code Default PIN-code of receiver is “0000”. This one can be modified later on. 2.2 Master MR PIN-code This PIN is used for maturity rating and playback of protected records and is supplied by the operator .
CONNECTIONS P5 English 10. OK Menu Off: Displays the current channel list. Menu On: Opens the highlighted setting 11. MENU Opens the main menu and from main menu you will get one step back 12. EXIT/SORTIE Exits from the menu, sub-menu or cancels actions 13.
P6 ST ARTING UP FOR THE FIRST TIME 1. Connect the LNB or Mono block for ASTRA 19.2 /ASTRA 23.5 of your satellite antenna to the SA T IN connector of your receiver using a good quality coaxial cable and suitable ‘F-connector’ plugs. 2. Connect one end of a good quality HDMI cable (V1.
ST ARTING UP FOR THE FIRST TIME P7 English 4.1 Language, Country and Video setup After turning on the power for the first time, the OSD language , Country and Video Setting menus will be shown. First choose your language with tu , then press pq to select your preferred country .
P8 ST ARTING UP FOR THE FIRST TIME When all settings have been made, press BLUE Next to continue. T o check or change the settings for the satellite on port 1 press OK to enter the submenu.
QUICK GUIDE TO USING Y OUR RECEIVER P9 English 5.0 QUICK GUIDE TO USING Y OUR RECEIVER We at THOMSON understand that you can’t wait to enjoy your new HD receiver . The following quick guide will make you familiar with the basic operation of this device.
P1 0 OPERA TION 6.1.3 Using the P+/P - keys P+ or p will switch to a higher channel. P - or q will switch a lower channel. 6.2 Info banner At any time during viewing mode you can press the button to get info about the current channel and programme*. For the current programme information use tu to change between the NOW and NEXT event info.
MAIN MENU P1 1 English By pressing the LIST button you can check the set timers and delete a timer by pressing the BLUE button. With YELLOW or EXIT/SOR TIE you can close this menu again. If the highlight is on a channel, you can press OK to directly switch to this channel.
P1 2 MAIN MENU 7 .1 Installation This menu allows you to change satellite settings and to search for channels. Further you can adjust important settings for your receiver . It consists of the following sub-menus: Antenna Setup , Channel Search , System Settings , Parental Lock and Factory Reset .
MAIN MENU P1 3 English Set Limit : Press OK to open this sub menu for setting up the maximum position of you dish. This is needed if your dish will touch a wall and can be damaged. GO T O X set-up In this menu you can set your geographical location if you use a motor and it supports GOTO X.
P1 4 MAIN MENU NO TE: When you want to add technical data for a new transponder we recommend verifying it by consulting websites like: www .lyngsat.com or www.
MAIN MENU P1 5 English Conversion : Letterbox, Pan&Scan or Combined , to choose the preferred picture format. Video Output : RGB or CVBS , depending on what your TV set supports, but for Scart we recommend RGB . Resolution : Only selectable for HDMI HDCP : ON or OFF , please see the note above.
P1 6 MAIN MENU setting you will have to enter your PIN code when switching through channels which support EPG or submit EPG based parental rate. Not rated content : Use tu buttons to select Blocked or Unblocked . In order to block or not block the channels with PIN code before decoding, where the EPG based parental rate not broadcasted.
MAIN MENU P1 7 English NO TE: Please connect a correctly formatted USB storage device with the correct software file loaded to the root directory and then connect it to your receiver .
P1 8 MAIN MENU a defined rate for a movie or special event you can use this setting to protect children from watching improper content for their age. These PIN codes are also used to start playback of a recording with protection. The availability and access of this menu depends on if the broadcaster supports/opens this function.
MAIN MENU P1 9 English favourite group and press RED to delete this channel. Then press t to change to the left side again if you want to add other channels to favourite groups. NO TE: Removing a channel from a favourite group doesn’t remove this channel from the channel list.
P20 MAIN MENU 7 .4.5 HDD Manager (PVR) The HDD Manager menu allows you to select a recording file for Playback , Delete , Lock and Rename . It allows you to select another Partition and/or Format for the connected HDD into F A T32. Make sure you have connected your external HDD to the USB port on the rear panel on which you made recordings before.
MAIN MENU P21 English SMS method. After you have entered a new name for the selected recording, press OK to store. Sor t Press MENU and select Sort and the way you like to display the record list. Select between Sort by Date if you want to sort by date of events.
P22 TROUBLESHOO TING Duration : Use the 0~9 buttons to digit the duration of the timer . For duration of 45 min, just enter 45 and press OK or for 1h 30min, just enter 130 and press OK . Enable : Choose between Y es or No . Y ou have to choose Y es if you want the timer to start at the desired time.
SPECIFICA TIONS P23 English Symptom C ause Remedy The remote control does not work The batteries of the remote control are not inserted, wrongly inserted or exhausted. Check whether the batteries are inserted correctly or exhausted, if so replace the batteries in the remote control.
P24 SPECIFICA TIONS Output voltage 12 V DC, 2.0A Power consumption: max. 20 W , typ. 8.00 W Power consumption in stand-by: max. 1.00 W Operating temperature: +0 to +40 °C Storage temperature: -10 to +70 °C Operating humidity range: 25 ~ 75% RH, non-condensing Size (W x D x H) in mm: 261 x 168 x 51 Weight: 0.
デバイスThomson THS812の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Thomson THS812をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはThomson THS812の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Thomson THS812の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Thomson THS812で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Thomson THS812を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はThomson THS812の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Thomson THS812に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちThomson THS812デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。