Tiptelメーカー1030の使用説明書/サービス説明書
ページ先へ移動 of 20
Manual (en) Feature Phone with hands-free operation and telephone book tiptel 1030 tiptel 1031 tiptel.
.
Contents 3 Contents Contents .......................................................................................................... 3 Safety notices ..................................................................................................
Contents 4 Appendix .......................................................................................................... 16 Troubleshooting .......................................................................................... 16 Power failure .
Safety notices 5 Safety notices Please observe the following very closely when setting up, connecting and using the telephone: Only plug the connection cables into sockets designated for this use. Lay the connection cables such that they do not pose any risk of accidents.
Safety notices 6 Product features Commercial grade high-quality speakerphone LCD displays phone numbers, date and time Hands free (half duplex) Message Waiting Indication (FSK) 60 .
Button allocation 7 Button allocation 1 LCD Display Displays the phone number, date and time and other information. 2 X / MENU a. Press to delete or edit the phone book and one-touch memories. b. Press for min. 3 secs to enter the main function settings.
Button allocation 8 6 / P a. In on-hook status press to review the outgoing number. b. In off-hook status press to dial the last dialed number. c. Insert a pause of 1.2 / 2.4 or 3.6 secs while editing the phone book or pre-dialing a number. 7 Press to mute the line (microphone mute).
Installation 9 Installation 1. Connect one end of the coil cord to the jack of the handset (15), connect the other end to the jack of the base unit. 2. Plug one end of the flat cable to the line jack (16) of this phone, plug the other end to the telephone wall socket.
Function Setup 10 F unction setup Every function setup is available by using ju st a single key. In on-hook status, press X/MENU for a minimum of 3 seconds to enter the function menu. Pressing the very same key X/MENU repeatedly will show the different functions available one after another.
Function Setup 11 Set the Ring Melodies After set up the EXT. NO., press X/MENU to access the RING MELODIES setup. Press to select the melody (1-16) an d press X/MENU to confirm. Set the Ring Volume After set up the RING MELODIES, press X/MENU to access the RING VOLUME setup.
Operation 12 Operation Make a Call Pick up the handset or press to get dial tone and dial the number. Use X/MENU to edit the number. When the called party answers the phone, the LCD will time the call automatically. In pulse dialing mode it is possible to temporarely switch to DTMF (tone dialing) mode during a call pressing * .
Operation 13 Note: Please, check flash timing in case of problems. PABX setting usually is 100 ms while network providers may use 100 ms or 300 ms. Please, ask your network provider or PBX installer (in case this device is used behind a PABX) for the appropriate setting.
Operation 14 Caller ID list Review In on-hook status, press to review the caller’s phone number and the time they called. Delete When you check the incoming calls, press to find the call you wish to de- lete. Press X/MENU once shortly to delete a single call.
Operation 15 Dial from Phone Book In on-hook status, when reviewing the phone book and finding the number you wish to dial, press or pick up the handset to dial the stored phone number. Reset complete device back to factory settings In on-hook mode, press R for more than 8 seconds.
Appendix 16 Appendix Troubleshooting If you have difficulties on your phon e’s operation, the suggestions below should solve the problems: Problem Possible cause Solution/recommendation No display, no dial tone Connector cable not making contact. Check all cables and plug connections.
Appendix 17 Power failure The internal clock stops if there is a power failure in the telephone network. All set- tings are retained however, meaning the settings stay as they were before when power is restored. All you need to do is reset the clock. Technical data Dimensions (W x H x D): 210 x 153 x 100 mm Weight: approx.
Appendix 18 Guarantee Tiptel provides a voluntary guarantee on the device, the conditions of which are published on http://www.tiptel.com. The guar antee conditions applicable at the time of purchase apply. The original sales slip (receipt, bill) with serial number and/or IMEI number is used as proof of purchase.
.
Tiptel.com GmbH Business Solutions Halskestraße 1 40880 Ratingen Deutschland Tel.: 0900 100–84 78 35* Vanity Tel.: 0900 100–TIPTEL* Internet: www.
デバイスTiptel 1030の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Tiptel 1030をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTiptel 1030の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tiptel 1030の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tiptel 1030で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tiptel 1030を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTiptel 1030の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tiptel 1030に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTiptel 1030デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。