TopfieldメーカーTF 100 Cの使用説明書/サービス説明書
ページ先へ移動 of 50
T OPFIELD TF 100 C User Guide Digital Cable Receiv er CONAX.
.
Contents iii Contents 1 Introduction 1 1.1 Features ............................... 1 1.2 Controlling the digital r eceiver .................. 2 1.2.1 The front panel ....................... 3 1.2.2 The remote contr ol ..................... 4 2 Setup 6 2.
iv Contents 3 Preference Settings 13 3.1 Language settings .......................... 1 3 3.2 V ideo and audio settings ...................... 1 5 3.2.1 T elevision standard .................... 1 5 3.2.2 Colour model ........................ 1 5 3.2.
Contents v 6 Listing Services 33 6.1 Editing the favourite list ...................... 3 3 6.2 How to use on-screen keyboar d .................. 3 5 6.3 T ransferring receiver data ..................... 3 5 7 Firmware Update 37 7.1 Checking the firmware information .
.
1 Chapter 1 Introduction The TF 100 C digital receiver is fully compliant with the inter - national Digital V ideo Broadcasting (DVB) standar d, and thus is able to receive digital br oadcasts of that standard. NOTE In general we equate a channel with a frequency .
2 Introduction • Y ou can view information about the current television or radio programme. • Has an electronic pr ogramme guide that provides an overview of scheduled programmes. • Y ou can update the firmware of the digital r eceiver to the latest version which would be provided by the manufac- turer .
1.2 Controlling the digital receiver 3 1.2.1 The front panel The front panel of the digital r eceiver has buttons to control the digital receiver , and specific lamps and a display to indicate its status. The following indicates what they mean. STANDBY ST ANDBY button switches the digital receiver between standby mode and operation mode.
4 Introduction 1.2.2 The remote control 1 button switches the digital re- ceiver between standby mode and operation mode. 2 mutes the sound. Pr ess again to switch it back on. 3 Numeric buttons are used to enter a service number for service change or to specify values for menu options.
1.2 Controlling the digital receiver 5 It is also used to select a menu item. 13 switches between television services and radio services. 14 SA T is not used in this model. 15 , buttons decrease or incr ease the volume. They are also used to change values for menu options.
6 Setup Chapter 2 Setup 2.1 Unpacking Before going any further , check that you have r eceived the following items with your digital receiver . • Remote control unit • T wo batteries for the remote control (AAA 1.5 V) • A copy of this user guide NOTE Accessories may vary according to your local ar ea.
2.2 Safety precautions 7 • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moistur e. The digital receiver is designed for use indoors only . Use dry cloth when cleaning the digital receiver .
8 Setup 2.3 Rear panel connections The TF 100 C has some connections on the back. RS-2 32 VCR TV CABLE OUT CABLE IN VIDEO S/PDIF R - AUD IO - L 1 2 3 4 5 6 7 8 Check what connections your television set has in comparison with the digital receiver . 1 CABLE IN Cable broadcasting signal input socket.
2.4 Connecting up your digital receiver 9 T able 2.3: Connectors specifications VIDEO Composite video (CVBS) output A UDIO Left & right audio output TV CVBS/RGB/YUV video output Left & right .
10 Setup then use the next connector in the following order for better picture quality . 1. SCART connector ( TV ) 2. Composite connector ( VIDEO ) Y ou should configure audio and video settings after connecting up the digital receiver . See § 3.2 for detailed description.
2.5 Switching on for the first time 11 T o connect the audio connectors Y ou will need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the A UDIO L (white) and A UDIO R (red) sockets on the digital re- ceiver , and the other end into the matching sockets on your television or audio system.
12 Setup 2.5.1 Inserting batteries in the remote control T o insert the batteries, open the battery compartment by remov- ing the lid, and then insert the batteries observing the polarity , which is marked on the base of the battery compartment.
13 Chapter 3 Preference Settings 3.1 Language settings Y ou can select the language in which the menu would be dis- played. In addition to that, you can select which language of au- dio track and of subtitle track should be output. Select the System Setting > Lan- guage Setting menu.
14 Preference Settings Subtitle language Set the 1st Subtitle Language option and the 2nd Subtitle Lan- guage option to your desired languages. When you watch a programme, if the pr ogramme has a subtitle track of the lan- guage that is designated for the 1st Subtitle Language , it will be displayed.
3.2 V ideo and audio settings 15 3.2 V ideo and audio settings Y ou have to configure the video and audio settings appropriately to your television set and other appliances. Select the System Setting > A/V Output Setting menu. Y ou should see a screen like the left figure.
16 Preference Settings digital receiver linked to your television via this connector , you should set the Video Output option to your desired colour model.
3.3 Local time setting 17 Y ou cannot fully enjoy wide-screen pr ogrammes with your normal-screen television as the above figur es show . The left figure shows a normal pictur e displayed in the normal screen. T o watch wide-screen pr ogrammes in the shape like the centre figure, set the 16:9 Display Format option to Letter Box .
18 Preference Settings T able 3.1: T ime offset table Time offset City GMT − 12:00 Eniwetok, Kwajalein GMT − 11:00 Midway Island, Samoa GMT − 10:00 Haw aii GMT − 09:00 Alaska GMT − 08:00 Pac.
3.4 Parental control 19 If daylight saving time is observed in your state at the moment, set the Da ylight Saving Time option to On . NOTE Daylight saving time adds one hour to the time when the op- tion is set to On . When setting the time offset from Gr eenwich Mean T ime, make sure that time of fset does not include day- light saving time.
20 Preference Settings NOTE If a programme does not have any pr ogramme classification information, your censorship setting will not take effect. If anyone is trying to watch a programme that is of or above the censorship setting, the person has to enter the personal identification number to override.
3.5 Adjusting the on-screen display 21 to + 3 lines. The more high you set the option, the mor e low the information box will be positioned..
22 Service Search Chapter 4 Service Search After connecting up the digital receiver , you will need to per- form a service search. 4.1 Searching broadcasting services T o perform service search, select the Installation > Ser vice Search menu. Y ou should see a screen like the left figure.
4.2 Resetting to factory settings 23 quency option. Symbol Rate stands for data transfer rate, and QAM is a form of modulation used in digital broadcasting. Broadcasting operators send their services in a symbol rate by a modulation method. Perhaps you do not have to specify the Symbol Rate and QAM Mode options since they are seldom changed.
24 Service Search • Services list • Favourite list • T imer list • Preference settings Y ou can reset all data of the digital r eceiver . T o do that, select the Installation > F actor y Setting menu, and then you are asked for confirmation.
25 Chapter 5 Daily Usage 5.1 V olume control Use the and buttons to alter the volume to a comfortable level. Y ou may need to adjust the volume on your television set too. T o temporarily switch off the sound, pr ess the button. Press it again to r estore the sound to previous level.
26 Daily Usage On the services list, you can see the service information: • Service number and name • T ransponder information A dollar sign ( $ ) may be marked on some entries, indicating pay service. T o watch pay services, you need the subscription card.
5.2 W atching television 27 T o display the favourite lists, press the F A V button. Y ou should see a screen like the left figure. As you move the high- light bar up or down on the favourite group list at the left box, favourite services belong- ing to the highlighted group ar e listed on the right box.
28 Daily Usage 5.2.3 V iewing programme information Pressing the button displays the information box, on which you can see all of the following: • Service number and name • Signal level and qualit.
5.3 V iewing electronic programme guide 29 Stereo , Mono , Left or Right . However , if a multifeed pro- gramme is provided at the moment, video tracks will be dis- played. In this case, you have to press the button once more to select an audio track.
30 Daily Usage Pressing the EPG button dis- plays the electronic pr ogramme guide, on which you can see the following: • Scheduled programmes • programme summary • Broadcasting d.
5.4 W atching multifeed programme 31 5.4 W atching multifeed programme Some broadcasts such as sports channels can pr ovide a variety of perspectives on a programme at a same time. W e call it a multifeed programme. Y ou can select and watch a perspective you prefer .
32 Daily Usage 2. Set the Ser vice option to the service which pr ovides the programme you want. Pr essing the OK button on this option displays a services list, from which you can select your desired service. 3. There are five timer modes: One Time means literally ‘one time’.
33 Chapter 6 Listing Services 6.1 Editing the favourite list Y ou can make your own favourite services list. In fact, you can define multiple favourite services lists, each being a ‘group’ of chosen services. Select the Organizing F av or ites menu.
34 Listing Services Y ou can add up to 30 groups. T o add a group, select the NEW option in the group list; then the on-scr een keyboard appears. See § 6.2 for how to use the on-screen keyboar d. T o rename a gr oup, put the highlight bar on the group entry you want and press the F2 button; then the on-screen keyboard appears.
6.2 How to use on-screen keyboard 35 services list after adding radio services, press the button again. W ith your favourite services list, you can select your favourite services more easily .
36 Listing Services 1. Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the digital receiver , and the other end into the matching port on the other digital re- ceiver .
37 Chapter 7 Firmware Update The digital receiver has a stable and convenient firmwar e to use. However , a new firmware may be released to impr ove the digital receiver . Y ou can get the latest firmware and an update utility which runs on most versions of W indows from the T opfield website, http://www.
38 Firmware Update NOTE Y ou can only update with firmwares of which system identifi- cation is identical to that of yours. Otherwise you will fail in firmware update. 7.2 From your computer via RS-232 port It is possible to transfer a new firmware to the digital r eceiver from your computer by connecting them with a RS-232 cable.
7.3 From another digital receiver via RS-232 port 39 7.3 From another digital receiver via RS-232 port It is possible to transfer the firmware fr om the digital receiver to another same digital receiver by connecting them with a RS- 232 cable. T o update the firmware with this method, perform the following steps: 1.
40 INDEX Index 16:9 , 16 16:9 Display F ormat , 17 1st Audio Language , 14 1st Subtitle Language , 14 2nd Audio Language , 14 2nd Subtitle Language , 14 4:3 , 16 A/V Output Setting , 15 Access Control.
41 One Time, 31 Organizing F avorites, 32 OSD T ransparency, 20 P AL, 15 P arental Control, 19 PIN, 19 QAM, 22 QAM Mode, 22 Quick Scan, 22 Radio, 30 Reset Service List, 23 RS-232, 35 , 37 , 38 S/PIDF,.
.
.
Correct disposal of this product This marking shown on the product or its literatur e indicates that it should not be disposed with other household wastes at the end of its working life.
デバイスTopfield TF 100 Cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Topfield TF 100 Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTopfield TF 100 Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Topfield TF 100 Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Topfield TF 100 Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Topfield TF 100 Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTopfield TF 100 Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Topfield TF 100 Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTopfield TF 100 Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。