Toshibaメーカー1410-S105の使用説明書/サービス説明書
ページ先へ移動 of 271
5.375 x 8.375 ver 2.4.0 TOSHIBA C6624-1202M3 Satellite ® 1410/1415 Series User’ s Guide If you need assistance: InT ouch ® Center Calling within the United States (800) 457-7777 Calling from outside the Unite d States (949) 859-4273 For more information, see Chapter 8 on page 206 in this guide.
2 5.375 x 8.375 ver 2.4.0 Model: Satellite ® 1410/1415 ReWritable CD/DVD Drives The computer syste m you purchased may include a ReWr itable CD and/or D VD dri ve( s), among the most advanced data storag e technologies av ailable.
3 5.375 x 8.375 ver 2.4.0 ARISING OUT OF THE USE OF THE COMPUTER PR ODUCTS IN ANY CRITICAL APPLICA TIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRI TICAL APPLICA TION, Y OU , AND NO T TOSHIB A, ASSUME FULL RESPONS IBILITY FOR SUCH USE.
4 5.375 x 8.375 ver 2.4.0 Contact: T oshiba America Inform ation Sy stems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industr y Canada Requirement This Class B digital apparatus complies with Canadi an ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
5 5.375 x 8.375 ver 2.4.0 company will gi ve you notice, in writing, to allow you to make any changes necessary to mainta in uninterr upted service. If Problems Arise If any o f your telephone equipment is not operating properly , you should immediately remov e it from your telephone line, as it may cause harm to the telephone network.
6 5.375 x 8.375 ver 2.4.0 aw are that compliance with the abov e conditions may not prev ent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representativ e designated by the s upplier .
7 5.375 x 8.375 ver 2.4.0 experience a less than optimal netw ork perfo rmance or ev en lose your network connection. If you should experience an y such proble m, immediately turn of f either one of your Bluetooth TM or W ireless LAN. Please contact T oshiba PC product support on web site http://www .
8 5.375 x 8.375 ver 2.4.0 Canada – Industry Canada (IC) This de vice complies with RSS 210 of Industry Canada. Operation is subject to the followi ng two conditions: (1) this de vice may not cause interference, and (2) th is de vice must accept an y interference, including interference that may cause undesired operation of this de vice.
9 5.375 x 8.375 ver 2.4.0 België/ Belgique: For outdoor usage only channel 10 (24 57 MHz) and 11 (2462 MHz) is allo wed. For pri vate usage outside b u ildings across public grounds ove r less than 300m no special re gistration with IBPT/BIPT is required.
10 5.375 x 8.375 ver 2.4.0 USA-Federal Communications Commission (FCC) This de vice complies with P art 15 of FCC Rules. Operation of the devices in a W ireless LAN System is subj ect to the following tw o conditions: ❖ This de vice may not cause harmf ul interference.
11 5.375 x 8.375 ver 2.4.0 For both antennas, the radiated out put po wer of the TO SHIB A W i reless LAN Mini PCI Card is far below th e FCC radio frequency exposure limits. Nev ertheless, the TOSHIB A W ireless LAN Mini PCI Card shall be used in such a manner th at the potential fo r human contact during normal operation is minimized.
12 5.375 x 8.375 ver 2.4.0 Low po wer radio frequency electric machinery shall resist against interference from leg a l co mmunications or from indus trial, scientif ic and medical radio emission electric machinery . Using this equipment in Japan In Japan, the frequency bandwidth of 2,400.
13 5.375 x 8.375 ver 2.4.0 Fax: 03-5444-9450 Device Authorization This device obtains the T echnical Regulation Confor mity Certif ication and the T echnical Conditions Compliance Approv al, and it be.
14 5.375 x 8.375 ver 2.4.0 Approved Countries for use This equipment is approved to the radi o standard b y the countries in Fig.1. Fig. 1. Caution: Do not use this equipment except in the countries in Fig.
15 5.375 x 8.375 ver 2.4.0 T o prev ent direct exposure to the laser beam, do not try to open the enclosure. Location of the required label (Sample shown below . (Location of the label and manufacturing information may v a ry .) CA U T IO N : This appliance contains a laser system and is classified as a “C LASS 1 LASER PRODUCT .
16 5.375 x 8.375 ver 2.4.0 Export Administration Regulation This document contains technical da ta that may be controlled under the U.S. Export Administration Regulati ons, and may be subject to the approv al of the U.S. Department of Commerce prior to export.
17 5.375 x 8.375 ver 2.4.0 Bluetooth is a trademark o wned by its proprietor and u sed by T oshiba under license. All other brand and product names are tr ademarks or registered trademarks of their respective companies. Computer Disposal Information This product contains mercury .
18 5.375 x 8.375 v er 2.4.0 Contents Introduction ........ ........................................ .............. 27 This guide .............................................................. 27 Safety icons ...........................................
19 Contents 5.375 x 8.375 v er 2.4.0 Creating a computer -friendly environment ....... 43 Keeping yourself comfortable .......................... 44 Precautions ...................................................... 47 Setting up your computer .......
20 Contents 5.375 x 8.375 v er 2.4.0 Caring for your computer ....................................... 77 Cleaning the computer ..................................... 78 Moving the computer ....................................... 78 Using a computer lock .
21 Contents 5.375 x 8.375 v er 2.4.0 Setting up for comm unications ............................ 102 Connecting the modem .................................. 102 Connecting your computer to a network ........ 103 Powering down the computer ............
22 Contents 5.375 x 8.375 v er 2.4.0 Setting battery alarms .................................... 130 Changing the main battery ................................... 131 Removing the battery from the computer ...... 131 Removing the battery from the batter y cover .
23 Contents 5.375 x 8.375 v er 2.4.0 Using the Windows ® XP tour ......................... 165 Lesson 15: T urning off your computer ................. 166 Chapter 6: Exploring Y our Op tions ............ .............. 167 Windows ® XP special features .
24 Contents 5.375 x 8.375 v er 2.4.0 Recording sounds .......................................... 184 Using a microphone ....................................... 184 Adjusting recording quality ............................ 185 Using external speakers or headphones.
25 Contents 5.375 x 8.375 v er 2.4.0 The Windows ® XP operating system can help you ........................................... 211 Resolving a hardware conflict .............................. 212 A plan of action ....................................
26 Contents 5.375 x 8.375 v er 2.4.0 Disabling or enabling the T ouchPad ..................... 243 Keyboard hot keys .............................................. 243 Appendix B: Power Cable Co nnectors ..................... 244 USA and Canada ......
27 5.375 x 8.375 ver 2.4.0 I n t roduct ion W elcome to the world of powerful and portable multimedia computers! W ith your new T oshiba notebook computer , your access to information can accompany you where ver you go.
28 Introduction Safety icons 5.375 x 8.375 ver 2.4.0 Safety icons This manual contains safety instru ctions that must be observed in order to av oid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
29 Introductio n Other documentation 5.375 x 8.375 ver 2.4.0 Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon highl ights technical information about the computer . HINT : This i con denotes helpful hints and t ips.
30 Introduction Service options 5.375 x 8.375 ver 2.4.0 Ser vice options T oshiba offers a full line of service options built around its SelectServ ® warranty programs. For mo re information, visit T oshiba's W eb site at toshiba.com . If you hav e a problem or need to contact T oshiba, see “If Something Goes Wrong” on page 206 .
31 5.375 x 8.375 ver 2.4.0 Chapter 1 Finding Y our W ay Around This chapter presents a “grand tour” of your notebook computer . It serves as a reference when you need to locate specific parts of the computer .
32 Finding Y our Way Around F r ont with the display closed 5.375 x 8.375 ver 2.4.0 Front with the display closed The lights on the system indicator panel prov ide information about v arious system functions. For a description, see “System indicator panel” on page 39 .
33 Finding Y our Way Around Back 5.375 x 8.375 ver 2.4.0 Back The DC-IN is where you plug in the A C adapter . The LAN port lets you connect the computer to a local area network using an Ethernet link. The USB (Univ e rsal Serial Bus) ports allo w you to connect USB peripherals to your computer .
34 Finding Y our Way Around Right side 5.375 x 8.375 ver 2.4.0 Right side The diskett e driv e LED (light-emitting diode) flashes when the diskette dri ve is in use (for systems with a diskette dri ve). The diskett e driv e allows disk ettes to be accessed (for systems with a diskette driv e ).
35 Finding Y our Way Around Left side 5.375 x 8.375 ver 2.4.0 The eject button opens the dri ve tray when the computer is turned on. The manual eject b utton enables you to open the driv e tray when the computer is of f. CAUTION: Never use a p encil to press the manual eject b utton.
36 Finding Y our Way Around F r ont with the display open 5.375 x 8.375 ver 2.4.0 The PC Card eject b uttons release PC Cards from the corresponding slots. The battery r elease latc h secures the battery cov er to the computer , preventing the battery from dislodging from the computer case.
37 Finding Y our Way Around F r ont with the display open 5.375 x 8.375 ver 2.4.0 The stereo sp eakers let you hear sounds, such as system alarms associated with your software, and music from D VD - R OMs and audio CDs. The function keys , when used with the Fn ke y , acti vate se veral dif ferent system functio ns.
38 Finding Y our Way Around F r ont with the display open 5.375 x 8.375 ver 2.4.0 The front panel p rovides a palm r est to assist you in maintaining proper post ure while using the computer . The 85-key keyb oa rd provides all the functionality of a full- size keyboard.
39 Finding Y our Way Around F r ont with the display open 5.375 x 8.375 ver 2.4.0 types the number printed on the front of the k ey instead of typing the letter printed on the top of the ke y . The caps lock light glo ws when the caps lock function is on.
40 Finding Y our Way Around F r ont with the display open 5.375 x 8.375 ver 2.4.0 The disk/disc activity light flashes g reen when the disk ette driv e, the D VD-R OM or the multi-function dri ve is being accessed. CAUTION: Never turn off the computer while any drive is in use.
41 Finding Y our Way Around Underside 5.375 x 8.375 ver 2.4.0 The next track b utton causes the disc player to skip to the follo wing track on the disc. NOTE: If you have set a password for logging onto your system, your computer will start up and you will need to log on before being able to play a CD or DVD.
42 Finding Y our Way Around Underside 5.375 x 8.375 ver 2.4.0 The battery r elease latc h secures the battery cov er to the computer , preventing the battery from dislodging from the computer case.
43 5.375 x 8.375 ver 2.4.0 Chapter 2 Getting Started This chapter provides tips for w o rking comfortably , describes ho w to connect components, and ex plains what to do the first time you use your n otebook computer . Selecting a place to work Y our computer is portable and designed to be used in a v ariety of circumstances and locations.
44 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.4.0 ❖ Equipment that ge nerates a st rong electromagnetic field, such as stereo speakers (oth er than speakers that are connected to the computer) or speakerphones.
45 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.4.0 ❖ If you are using an e xternal monitor , the top of the display should b e no higher than e ye lev el. ❖ If you use a paper holder , set it at about the same height and distance as the screen.
46 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.4.0 ❖ Adjust the back of your chair so that it supports the lo wer curv e of your sp ine. If necess ary , use a cush ion to provide e xtra back support. Lo wer-back-support cushions are a vailab le at man y of fice supply stores.
47 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.4.0 W ork habits The key to a voiding discomfort or injury from strain is to v ary your acti vities. If possible, schedule a variety of tasks into your working day . Finding ways to break up the routine can reduce stress and impro ve your ef ficienc y .
48 Getting Started Setting up your computer 5.375 x 8.375 ver 2.4.0 ❖ Some PC Cards can become ho t with prolonged u se. If two cards are installed, both can become hot e ven if only one is being use d. Overheating of a PC Card ca n result in errors or instability in its operation.
49 Getting Started Setting up your computer 5.375 x 8.375 ver 2.4.0 T o use external power or to char ge the battery , you must attach the A C adapter .
50 Getting Started Setting up your computer 5.375 x 8.375 ver 2.4.0 5 Click Ye s to register , or No to exit the process. NOTE: If you click No , you may re gister with T oshiba by clicking the Register with T oshib a icon on the desktop. 6 Enter your personal inform ation in the re gistration windo w .
51 Getting Started Installing additional memory (optiona l) 5.375 x 8.375 ver 2.4.0 ❖ Connect a full-size keyboard (see “Using an external ke yboard” on page 62 ) ❖ Connect an external monitor.
52 Getting Started Installing additional memory (optional) 5.375 x 8.375 ver 2.4.0 CAUTION: Do not try to install a memory module under the following conditions. Y ou can damage th e computer and the module. 1. The computer is turned on. 2. The computer was shut down using Standby mode .
53 Getting Started Installing additional memory (optiona l) 5.375 x 8.375 ver 2.4.0 Underside of the co mputer NOTE: Use a point size 0 Phillips screwdriver .
54 Getting Started Installing additional memory (optional) 5.375 x 8.375 ver 2.4.0 5 Using your finger or a narro w object, lift off the co ver . 6 Put the screw and the cov er in a sa fe place so that you can retrie ve them later . CAUTION: Static electricity ca n damage the memory module.
55 Getting Started Installing additional memory (optiona l) 5.375 x 8.375 ver 2.4.0 Inserting the memory module CAUTION: Avoid touching the connectors on the memory module or on the computer . Grease or dust on the connec tors may cause memor y access problems.
56 Getting Started Installing additional memory (optional) 5.375 x 8.375 ver 2.4.0 Removing a memor y module CAUTION: If you use the computer for a long time , the memor y modules will become hot. If this happens, let the modules cool to room temperature before you replace th em.
57 Getting Started Installing additional memory (optiona l) 5.375 x 8.375 ver 2.4.0 Removing the memory module 3 Gently pull the module out. CAUTION: Avoid touching the connectors on the memory module or on the computer . Grease or dust on the connec tors may cause memor y access problems.
58 Getting Started Connecting a mouse 5.375 x 8.375 ver 2.4.0 properly , as described in steps 8 and 9 of “Installing additional memory (o ptional)” on page 51 . Connecting a mouse Y ou may want to use a mouse instead of th e T ouchPad, the computer’ s b uilt-in pointing de vice.
59 Getting Started Using external display de vices 5.375 x 8.375 ver 2.4.0 Connect a parallel printer before you turn on the comput er . NOTE: Foll ow the manufacturer’ s instructions for connecting a parallel printer to your computer .
60 Getting Started Using external display de vices 5.375 x 8.375 ver 2.4.0 Directing the display output when you turn on the computer Once you’ ve connected an e xternal display de vice, you can choose to use the internal display only , the external de vice only , or both simultaneously .
61 Getting Started Using external display de vices 5.375 x 8.375 ver 2.4.0 documentation supplied with the de vice for additional confi guration steps. TECHNICAL NOTE: In order to us e the simultaneous mode, you must set the resolution of the in ternal display panel to match the resolution of the external display device.
62 Getting Started Connecting an external diskette drive 5.375 x 8.375 ver 2.4.0 Connecting an external diskette drive Although your computer may have an in ternal diskett e dri ve, you can attach an external USB diskette driv e to use diskettes with your computer .
63 Getting Started Connecting to a po wer sour ce 5.375 x 8.375 ver 2.4.0 Connecting to a power source Y our computer requires power to operate. Use the power cable and A C adapter to conn ect the computer to a liv e electrical outlet, or to ch arge the computer’ s battery .
64 Getting Started Connecting to a power so ur ce 5.375 x 8.375 ver 2.4.0 Connecting the power cable to the AC adapter 2 Plug the A C adapter into the DC-IN on the back of the computer . Connecting the AC adap ter to the computer 3 Connect the po wer cable to a liv e electrical outlet.
65 Getting Started Char ging the battery 5.375 x 8.375 ver 2.4.0 If the electrical outlet is li ve, the system indicator panel’ s A C po wer light ( ) glo ws green. DANGER: Damaged power cab les can cause fire o r electric shock. Never modify , forcibly bend, place heavy objects on top of, or apply heat to the power cable.
66 Getting Started Using the computer for the fir st time 5.375 x 8.375 ver 2.4.0 Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel . Opening the display pa nel CAUTION: T o avoid damaging the display panel, don’t force it beyond the point where it moves easily .
67 Getting Started Using the computer for the f irst time 5.375 x 8.375 ver 2.4.0 Pr essing the power button NOTE: When you turn on the comp uter for the first time, don’t turn off the power again until the operating sy stem has loaded completely .
68 Getting Started Using the computer for the fir st time 5.375 x 8.375 ver 2.4.0 Activating the power -on password When you f irst turn on your computer , no password is required. But you can set up your compu ter so that a password is required to complete the po wering up process in the future.
69 Getting Started Using the computer for the f irst time 5.375 x 8.375 ver 2.4.0 Important information on your computer’ s built-in LCD sensor Y our computer has a built-in LCD (liquid crystal display) sensor located near the left-h and corner of the palm rest.
70 Getting Started Using the computer for the fir st time 5.375 x 8.375 ver 2.4.0 your computer to go into Hi bernation mode ev en if your display panel is open. NOTE: T o start the computer ag ain from Hibernation mode, move the magnetic object away from the computer , then see “Starting again from Hibernation” on page 116 .
71 Getting Started Using the computer for the f irst time 5.375 x 8.375 ver 2.4.0 Once you’ ve positioned your curs or , you can select an object on the display screen by double-tapping the T ouch Pad or clicking the control b uttons. For more on the T ouchPad, see “Lesson 2: Using the T ouchPad and control buttons together” on page 140 .
72 Getting Started Using the computer for the fir st time 5.375 x 8.375 ver 2.4.0 Sample Mouse Pr operties window 5 Select Disable or Enable , whiche ver is appropriate. 6 Click A pply . 7 Click OK . The Mouse P roperties windo w closes. 8 Close the Printers and Other Hardware windo w .
73 Getting Started Using the computer for the f irst time 5.375 x 8.375 ver 2.4.0 Setting up a printer NOTE: Foll ow the manufacturer’ s instructions for connecting a printer to your computer .
74 Getting Started Using the computer for the fir st time 5.375 x 8.375 ver 2.4.0 Sample Contr ol P anel 2 Click Printers and Other Hard ware . 3 Click the Printers and Faxes icon.
75 Getting Started Setting up the fax function 5.375 x 8.375 ver 2.4.0 4 Click Add a printer . The Add Printer W izard window appears. Sample Add Printer W izard 5 Follo w the on-screen instructions. HINT : If you are using more than one printer , make sure the name is descriptive enough to help you tell the difference.
76 Getting Started Setting up the fax function 5.375 x 8.375 ver 2.4.0 2 Click the Set up faxing option. 3 Follo w the on-screen instructions. The fax function def ault setting is enabled. If it is disabl ed, enable the fax function b y doing the following: 1 Click Start , Printers and F axes .
77 Getting Started P owering off the computer 5.375 x 8.375 ver 2.4.0 Powering off the computer It’ s a good idea to po wer of f your computer when you are not using it for a while.
78 Getting Started Caring for your computer 5.375 x 8.375 ver 2.4.0 Cleaning the computer T o keep your comp uter clean, gently wipe the d isplay panel and exterior case wit h a lightly dampened cloth. As k your T oshiba dealer or network admi nistrator for suggestions for appropriate cleaning products.
79 Getting Started Caring for your computer 5.375 x 8.375 ver 2.4.0 PORT -Noteworthy computer loc k cable T o s ecure the computer: 1 Loop the cable through or around some part o f a heavy object. Make sure there is no way for a potential thief to slip the cable of f the obje ct.
80 5.375 x 8.375 ver 2.4.0 Chapter 3 Learning t he Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Sa ve your w ork frequently . Y our work stays in the computer’ s temporary memory until you sa ve it to the disk.
81 Learning the Basics Using the ke yboard 5.375 x 8.375 ver 2.4.0 ❖ Back up your files to diskettes (or other remov able storage media) on a re gular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly f a ils, you may lose all the data on it unless you hav e a separate backup copy .
82 Learning the Basics Using the ke yboar d 5.375 x 8.375 ver 2.4.0 Character keys T yping with the characte r keys is v ery much like typing on a type writer , except that: ❖ The spacebar creates a space chara cter instead of just passing over an area of the page.
83 Learning the Basics Using the ke yboard 5.375 x 8.375 ver 2.4.0 Windows ® special keys W indows ® special keys The keyboard provides two ke y s that ha ve special functions in the operating system: ❖ The W indows ® logo k ey opens the Start menu.
84 Learning the Basics Using the ke yboar d 5.375 x 8.375 ver 2.4.0 Using the numeric keypad overlay T o turn on the numeric k eypad o verlay , press Fn and F11 simultaneously . The numeric mode keyboard indicator light glo ws when the numeric o verlay is on.
85 Learning the Basics Emulating a full-size ke yboar d 5.375 x 8.375 ver 2.4.0 Emulating a full-size keyboard Although the co mputer’ s keyboard layout is compatible with a standard full-size keyb oard, it has fe wer ke ys.
86 Learning the Basics Starting a pr ogram 5.375 x 8.375 ver 2.4.0 For information on ho w to program the bu tton, see “TOSHIB A Console” on page 1 97 . Starting a program The easiest way to start a progra m is to click the name of the file that contains the informa tion you want to work on.
87 Learning the Basics Printing your work 5.375 x 8.375 ver 2.4.0 To s a v e : ❖ A f ile you are updating, open the program’ s File menu and click Sa ve . ❖ A ne w file, choose Sa ve As from the File menu, ty pe a name for the file, and click OK .
88 Learning the Basics Using disk ettes 5.375 x 8.375 ver 2.4.0 Sample Print window 3 Click OK or Print to print. Using diskettes A 3.5-inch diskette dri ve (for systems with a disk ette dri ve) lets you use high-density (1 .44 MB) diskettes for data transfer and storage.
89 Learning the Basics Using diskettes 5.375 x 8.375 ver 2.4.0 Inserting and removing diskettes 1 Hold the diskette so that the arro w on its upper surface points to ward the driv e. 2 Push the diskette gently into the dri ve slot. When the diskette is in place, the eject b utton pops out.
90 Learning the Basics Backing up your f iles 5.375 x 8.375 ver 2.4.0 ❖ Ne ver eat, smoke, or use erasers near your diskettes. Foreign particles can damage the diskette’ s surface. ❖ K e ep your diskettes a way from sources of magnetism, such as speakers and radios, since these can destroy data.
91 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 7 Click the icon for the disk ette dri ve (3 1/2 floppy [A:]). HINT : Y ou can also back up a file to a diskette b y clicking the file (or files) you want to backup with the secondar y button, then pointing to Send T o and clic king 3 1/2 Floppy (A:) .
92 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 Drive components and control buttons The CD/D VD control buttons are located at the front edge of the computer and can be accessed when the display panel is closed or open. Components Sample D VD-R OM or multi-function drive Use the eject b utton to open the di sc tray .
93 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 The manual eject b utton allows yo u to manually open the disc tray when po wer to the computer and the dri ve is off. CAUTION: Never use a p encil to press the manual eject b utton. Pencil lead can break off inside the co mputer and damage it.
94 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 The next track b utton skips to the following track on the disc. Y ou can eject a disc by pressing the stop/eject b utton twice. Use this method to eject a disc when the computer is turned of f and the sound subsystem is turned on.
95 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 CAUTION: Do not install or re move a memory module while th e DVD-ROM drive power is on. Inserting a disc WARNING: Before playing an audio CD or a DVD, turn the volume down. Playi ng the disc at maximum volume could da mage your ears.
96 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 3 Hold the disc by its edges and check that it is clean and free of dust. CAUTION: Handle discs carefully . Avoid touching the surface of the disc. Grasp it by its center hole and edge.
97 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 5 Gently press the center of th e disc onto the spindle until it locks into place. P ositioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle.
98 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 The computer automatically dete cts a disc in the driv e and opens the Audio CD window . T o play an audio CD select the Play A udio CD using W indows Media Player option and click OK .
99 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 Sample W indows Media TM Player scr een Viewing the contents of a CD or DVD CDs and D VDs contain files just like disk ettes and the hard disk. CDs are often used to install software or store f iles that require a lot of space, such as photographs and large presentation f iles.
100 Learning the Basics Playing a CD or D VD 5.375 x 8.375 ver 2.4.0 Removing a disc with the computer on CAUTION: Never press the eject button while the computer is accessing the drive. Wait for the disk/disc activity light on the system indicator panel to turn off before opening the disc tray .
101 Learning the Basics Using the D VD-ROM or multi- function drive 5.375 x 8.375 ver 2.4.0 Caring for CDs and DVDs ❖ Store your discs in thei r original containers to protect them from scratches and keep them clean. ❖ Ne ver be nd a disc or place hea vy objects on top of it.
102 Learning the Basics Setting up for communications 5.375 x 8.375 ver 2.4.0 Setting up for communications T o communicat e across the te lephone lines with another computer , you need: ❖ The compu.
103 Learning the Basics Setting up for communications 5.375 x 8.375 ver 2.4.0 Connecting to the modem port 2 Plug the other end of the RJ 11 telephone cable into the modular jack of a standard v oice-grade telephone line. NOTE: For more detailed informat ion regarding your computer’ s modem, visit T oshiba’ s Web site at toshiba.
104 Learning the Basics P owering down the computer 5.375 x 8.375 ver 2.4.0 Powering down the computer When you po wer down the computer , you ha ve a number of options to choose from: ❖ T urn Off o.
105 Learning the Basics P owering down the computer 5.375 x 8.375 ver 2.4.0 ❖ When starting up again, the system does not automatically open the programs and f iles you were pre viously using. Restart command Restart is the same as T urn Of f or Shut down b ut automatically po wers up the co mputer .
106 Learning the Basics Using T urn Off or Shut do wn 5.375 x 8.375 ver 2.4.0 Standby command The Standb y command puts the computer into a po wer- saving mode. Standb y stores the curre nt state of the computer in memory so that, when you restart the computer , you can continue working from where you left of f.
107 Learning the Basics Using T urn Off or Shut down 5.375 x 8.375 ver 2.4.0 Sample T urn off computer window 2 Click Tu r n O f f . The computer turns itself of f. If you are using the W indows ® XP Pro operating system and are a member of a domain, po wer off the computer as follo ws: 1 Click the Start button, then Shut down .
108 Learning the Basics Using T urn Off or Shut do wn 5.375 x 8.375 ver 2.4.0 T urning off or shutting down more quickly In addition to th e method described abo ve, you can turn of f or shut do wn the computer b y pressing the po wer button. T o do so , you must preset the mode.
109 Learning the Basics Using T urn Off or Shut down 5.375 x 8.375 ver 2.4.0 4 Select the listed po wer option you desire—for ex ample, Normal in the “Runni ng on batteries” section. 5 Click Details in the same section as the po wer option you selected.
110 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 ❖ When I close the lid Set this option to Power Of f if you want the computer to turn off when you c lose the display pa nel. 8 Click Override all Modes with settings here . The Set the range windo w appears.
111 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 Enabling the Hibernation command Hibernation enable d is a default setting. If it should become disabled, you can enable it as follows: 1 Click Start , Contr ol Panel . The Control P anel window appears.
112 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 4 Click the Hibernate tab, then click the Enable hibernate suppo rt check box. 5 Click OK to close the T OSHIBA Po wer Sav er Properties windo w , then close the Control Panel.
113 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 Sample Hibernate computer window 2 Select Hiber nate from the drop-do wn list of options. 3 Click OK . The compute r sa ves the state o f the system, includi ng all open programs and files, to the hard disk.
114 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 3 Double-click the To s h i b a P o w e r S a v e r icon. The TOSHIB A Power Sa ver Properties window appears. Y ou can also access the TOSHIB A Po wer Saver Propert ies windo w by usin g the TOSHIB A Console button.
115 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 Sample Normal P ower Pr operties window 6 Select Hiber nation for the options you want. ❖ When I pr ess the power button Set this option to Hiberna tion so that the computer will go into Hibernation mode when you press the po wer bu tton.
116 Learning the Basics Using Hibernation 5.375 x 8.375 ver 2.4.0 7 Click Override all Modes with settings here . The Set the range windo w appears. Sample Set the rang e window with DC only option 8 Do one of the follo wing: ❖ Click DC only if you w ant the settings to apply only when you are using battery p o wer .
117 Learning the Basics Using Standby 5.375 x 8.375 ver 2.4.0 Using Standby If you are using the W indows ® XP Home operating system, or are using the W indows ® XP Pro op erating system and are not a member of a domain, power off the computer using the Standby command as follo ws: 1 Click Start , T urn off computer .
118 Learning the Basics Using Standby 5.375 x 8.375 ver 2.4.0 Sample Stand by compute r window 2 Select Stand by from the drop-do wn list of options. 3 Click OK . The computer sav es the state of all open programs and files to memory , turns off the di splay , and goes into a low-po wer mode.
119 Learning the Basics Using Standby 5.375 x 8.375 ver 2.4.0 2 Click Perf ormance and Maintenance . 3 Double-click the To s h i b a P o w e r S a v e r icon. The TOSHIB A Power Sa ver Properties window appears. Y ou can also access the TOSHIB A Po wer Saver Propert ies windo w by usin g the TOSHIB A Console button.
120 Learning the Basics Using Standby 5.375 x 8.375 ver 2.4.0 Sample Normal P ower Pr operties window 6 Select Standby for the options you w ant. ❖ When I pr ess the power button Set this option to Standby so that the computer will go into Standby mode when you p ress the power button.
121 Learning the Basics Using Standby 5.375 x 8.375 ver 2.4.0 7 Click Override all Modes with settings here . The Set the range windo w appears. Sample Set the rang e window with DC only option 8 Do one of the follo wing: ❖ Click DC only for the set tings to apply only when you are using battery power .
122 5.375 x 8.375 ver 2.4.0 Chapter 4 Mobile Computing This chapter cov ers all aspec t s of using your computer while tra veling. T oshiba's energy-saver design Y our computer enters a low-po wer mode when it is not being used, thereby conserving e nergy and sa v ing money in the process.
123 Mobile Computing Running the computer on battery power 5.375 x 8.375 ver 2.4.0 v aries depending on usage. The battery may not char ge while the computer is consuming full po wer . After a period of time, the battery will lose its ability to perform at maximum capacity an d will need to be replaced.
124 Mobile Computing Running the computer on battery power 5.375 x 8.375 ver 2.4.0 ❖ Do not ov ercharge or re verse charge a battery . Overchar ging will shorten its life, and re verse char ging could damage it. ❖ A void touching the metal terminals of the battery with another metal object.
125 Mobile Computing Running the computer on battery power 5.375 x 8.375 ver 2.4.0 3 Operate the computer on battery po wer for f i ve minutes. If the battery has at least f ive minutes of operating time, continue op erating unt il the battery is fully discharged.
126 Mobile Computing Char ging batteries 5.375 x 8.375 ver 2.4.0 Charging batteries The main battery needs to be char ged before you can use it to po wer the computer . Y ou can charge the battery using yo ur computer , or you can use an optional b attery charger .
127 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.4.0 Charging the RTC battery The computer contains an internal battery that provides po wer for the real-time clock (R TC) and calendar . During normal use, the main battery k eeps the R TC battery adequately charged.
128 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.4.0 Determining remaining batter y power NOTE: Wait at least 16 seconds after turning on the computer before trying to monitor the remaining batter y power . The computer needs this time to check the batter y’ s remaining capacity and perform its calculatio ns.
129 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.4.0 Conser ving batter y power Ho w long a fully charged battery lasts when you are using the computer depends on a number of factors,.
130 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.4.0 you turn on the po wer again, you can continue where you left off. The computer stores the information on what you were doing until the battery runs out of po wer .
131 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.4.0 Changing the main batter y When your battery po wer is running lo w , you hav e two options: connect the computer to an A C power source or install a charged battery . NOTE: If your battery discharges fu lly , your information will be lost.
132 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.4.0 Sliding the battery r elease latch 5 Slide the battery release latch to ward the front of the computer . Slide the battery cover to ward the edge of the computer until it won’ t go any further .
133 Mobile Computing Changing the main battery 5.375 x 8.375 ver 2.4.0 Removing the battery fr om the battery cover 3 Lift the battery from the battery co ver . Inserting a charged battery 1 T urn of f the computer . See “T urn Of f or Shut down command” on page 104 .
134 Mobile Computing Disposing of used b atteries safely 5.375 x 8.375 ver 2.4.0 recessed areas, the battery co ver will slip comfortably into the battery slot. 8 Once the battery co ver has been inserted, slide the battery cov er until the side of the ba ttery release latch matches the side of the computer .
135 Mobile Computing T raveling tips 5.375 x 8.375 ver 2.4.0 Y ou must discard a battery if it becomes damaged. CAUTION: The computer’ s main battery is a lithium ion (Li-ion) battery , which can explode if not properly replaced, used , handled, or disposed of.
136 5.375 x 8.375 ver 2.4.0 Chapter 5 Getting to Know the Windows ® XP Operating System This chapter introduces the W indo ws ® XP operating system by guidi ng you through a fe w basic tasks.
137 Getting to Know th e Windows ® XP Operating System Lesson 1: Exploring the d esktop 5.375 x 8.375 ver 2.4.0 Lesson 1: Exploring the desktop The desktop is the launching pad fo r e verything you can do in the operating system.
138 Getting to Know th e Windows ® XP Operating System Lesson 1: E xploring the d esktop 5.375 x 8.375 ver 2.4.0 Icons An icon represents a folder , file, or program that can be quickly acti vated by double-clicking the icon.
139 Getting to Know th e Windows ® XP Operating System Lesson 1: Exploring the d esktop 5.375 x 8.375 ver 2.4.0 ❖ Adjust system settings ❖ Search for files ❖ Access W indows ® Help and Support.
140 Getting to Know th e Windows ® XP Operating System Lesson 2: Using the T ouchP ad and contr ol buttons together 5.375 x 8.375 ver 2.4.0 the files and folders reside in your co mputer on a storage device , such as a disk dri ve. Y ou can think of your computer storage system in terms of off ice equipment.
141 Getting to Know th e Windows ® XP Operating System Lesson 2: Using the T ouchP ad and contr o l buttons to gether 5.375 x 8.375 ver 2.4.0 left button) of the adj o ining control buttons to open the Start menu. NOTE: In this guide, th e term “click” refers to the primary button, which is usually the left one.
142 Getting to Know th e Windows ® XP Operating System Lesson 2: Using the T ouchP ad and contr ol buttons together 5.375 x 8.375 ver 2.4.0 Sample My Computer window o pen 6 No w click the Close button in the upper -right corner of this windo w . The My Computer windo w is closed.
143 Getting to Know th e Windows ® XP Operating System Lesson 2: Using the T ouchP ad and contr o l buttons to gether 5.375 x 8.375 ver 2.4.0 Sample desktop with th e taskbar on the right HINT : Y o u can move the taskbar to any of the desktop’ s four edges.
144 Getting to Know th e Windows ® XP Operating System Lesson 3: Learning about the Internet 5.375 x 8.375 ver 2.4.0 To u n l o c k i t : 1 Right-click the taskbar . A menu appea rs. If the Lock the taskbar option h as a check mark, then the feature is in use.
145 Getting to Know th e Windows ® XP Operating System Lesson 4: Cr eating a new document 5.375 x 8.375 ver 2.4.0 2 On the Vi e w menu, point to To o l b a r s , then click Address Bar . The operating system displays the address bar . It indicates that you are in “My Computer .
146 Getting to Know th e Windows ® XP Operating System Lesson 4: Cr eating a new document 5.375 x 8.375 ver 2.4.0 4 Double-click the My New Doc icon. The operating system open s the ne w document in Notepad—the text editor b uilt into the operating system.
147 Getting to Know th e Windows ® XP Operating System Lesson 5: Cr eating a new folder 5.375 x 8.375 ver 2.4.0 Lesson 5: Creating a new folder DEFINITION: A folder is an area where you can store documents and other types of files. It is anal ogous to a file folder stored in a file cabinet.
148 Getting to Know th e Windows ® XP Operating System Lesson 6: Starting p r ogr ams 5.375 x 8.375 ver 2.4.0 7 Close the windo w by clicking its Close butt on and continue with the next lesson to learn how to start programs. Lesson 6: Starting programs Usually , you will kno w which program you want to use for a particular task.
149 Getting to Know th e Windows ® XP Operating System Lesson 6: Starting pr ograms 5.375 x 8.375 ver 2.4.0 3 T o open the second program: ❖ Click Start , then click All Pr ograms .
150 Getting to Know th e Windows ® XP Operating System Lesson 7: Resizing, r epositioning, and hiding windows 5.375 x 8.375 ver 2.4.0 Lesson 7: Resizing, repositioning, and hiding windows If you ha ve follo wed the lessons in this chapter , you now hav e a screen wi th se veral program windo ws open.
151 Getting to Know th e Windows ® XP Operating System Lesson 7: Resizing, r epositioning, and hiding windows 5.375 x 8.375 ver 2.4.0 Using the taskbar If you ha ve applications open on the desktop, you can rearrange them by pointing to the applications’ button on the taskbar through use of th e T ouchPad and clicking the secondary button.
152 Getting to Know th e Windows ® XP Operating System Lesson 7: Resizing, r epositioning, and hiding windows 5.375 x 8.375 ver 2.4.0 The Paint windo w expands to f ill the screen, hiding e verything e xcept the taskbar . Notice that the Maximize button has changed.
153 Getting to Know th e Windows ® XP Operating System Lesson 8: Closing pr ograms 5.375 x 8.375 ver 2.4.0 No w that the windo ws are side by side, you can see ho w you could refer to one windo w while working in the other . Resizing and mo ving windows allo ws you to rearrange the desktop to suit your needs.
154 Getting to Know th e Windows ® XP Operating System Lesson 9: Cr eating shortcuts 5.375 x 8.375 ver 2.4.0 Lesson 9: Creating shortcuts By adding shortcu ts to your desk top, you can open p rograms or files with the click of a button. Y ou will probably want to create shortcuts for the programs y ou use most frequently .
155 Getting to Know th e Windows ® XP Operating System Lesson 9: Cr eating shortcuts 5.375 x 8.375 ver 2.4.0 4 Ty p e Calculator and click Finish . The operating system displa ys the new shortcut on your desktop. Creating a shortcut to the Character Map Use this method when you don’ t kno w the name and location of the program file.
156 Getting to Know th e Windows ® XP Operating System Lesson 9: Cr eating shortcuts 5.375 x 8.375 ver 2.4.0 Sample Searc h Results window HINT : Search also allows you to perform searches on the Internet. 2 Click All f iles and folders . 3 Ty p e char in the text box labeled: In all or part of the f ile name.
157 Getting to Know th e Windows ® XP Operating System Lesson 10: Changing the scr een saver 5.375 x 8.375 ver 2.4.0 A shortcut to the Ch aracter Map appears o n your desktop. NOTE: Shortcut icons can be recognized by an arrow in th e lower - left corner .
158 Getting to Know th e Windows ® XP Operating System Lesson 10: Changing the scr een saver 5.375 x 8.375 ver 2.4.0 2 Click Properties . The operating system displa ys the Display Properties windo w . Sample Display Pr o perties window 3 Click the Screen Sa ver tab .
159 Getting to Know th e Windows ® XP Operating System Lesson 11: Setting th e date and time 5.375 x 8.375 ver 2.4.0 Y ou can view an y object’ s properties b y clicking the object with the secondary b u tton, then choosing Pr oper ties from the shortcut menu that appears.
160 Getting to Know th e Windows ® XP Operating System Lesson 12: Removing objects fr om the desktop 5.375 x 8.375 ver 2.4.0 Sample Date and T ime Pr operties window HINT : T o open the Date and Time.
161 Getting to Know th e Windows ® XP Operating System Lesson 12: Removing objects fr om the desktop 5.375 x 8.375 ver 2.4.0 1 Click the New Folder icon you created, drag it until it is ov er the Recycle Bin icon an d it changes color , then release the primary b utton.
162 Getting to Know th e Windows ® XP Operating System Lesson 13: Using System Restor e 5.375 x 8.375 ver 2.4.0 Later on—in your real work, not in this tutorial—you will use the Rec ycle Bin to delete othe r object s such as folders, documents, and some times ev en programs.
163 Getting to Know th e Windows ® XP Operating System Lesson 14: If I am lost, what do I do? 5.375 x 8.375 ver 2.4.0 Sample System Restor e welcome screen The W indows ® XP operating system guides you thro ugh the process of storing your system se ttings for future use.
164 Getting to Know th e Windows ® XP Operating System Lesson 14: If I am lost, wha t do I do? 5.375 x 8.375 ver 2.4.0 2 If you do not see the inde x, click index . Help and Support displays the Ind ex. Sample Help and Support In de x The left side of the screen contains the inde x.
165 Getting to Know th e Windows ® XP Operating System Lesson 14: If I am lost, what do I do? 5.375 x 8.375 ver 2.4.0 Sample help windo w for drawings Notice that under the cate gory drawing s, there is a subcategory: creating using Paint . 4 Highlight creating using Paint, then c lick Display .
166 Getting to Know th e Windows ® XP Operating System Lesson 15: T urning off your computer 5.375 x 8.375 ver 2.4.0 T o start the tour: 1 Click Start , then click T our W indows XP The W indows XP T our window appears.
167 5.375 x 8.375 ver 2.4.0 Chapter 6 Exploring Y our Options In this chapter , you will explore other features of your notebook computer . Windows ® XP special features The Wi n d o w s ® XP operat.
168 Exploring Y our Options P ersonalizing your desktop 5.375 x 8.375 ver 2.4.0 Personalizing your desktop Y our desktop is your virtual wo rkspace. This section explains ho w to customize its features for the way you like to work.
169 Exploring Y our Options P ersonalizing your desktop 5.375 x 8.375 ver 2.4.0 Changing desktop and browsing style The operating system enables you to customize the way you vie w your desktop and brow se the files and folders on your local computer or netw ork file serv er .
170 Exploring Y our Options P ersonalizing your desktop 5.375 x 8.375 ver 2.4.0 Sample W eb-styl e option 3 Select the preferred options. 4 Click A pply , then click OK . Personalizing individual windows Just as you can display a W eb page on your desktop, yo u can also display a W eb page in an indi vidual windo w .
171 Exploring Y our Options P ersonalizing your desktop 5.375 x 8.375 ver 2.4.0 3 Click the Add W eb content to y our desktop link. 4 Follo w the on-screen instructions. Customizing window toolbars Y ou can display one or more cu stomizable toolbars at the top of a windo w .
172 Exploring Y our Options P ersonalizing your desktop 5.375 x 8.375 ver 2.4.0 The elemen ts you can ad d to the top of t he window are: Displaying a toolbar in a window 1 Click Start , then click My Computer . The My Computer window appears. 2 On the V iew menu, point to T o ol bars, then clic k the nam e of the toolbar you w ant to display .
173 Exploring Y our Options P ersonalizing your desktop 5.375 x 8.375 ver 2.4.0 The My Computer window appears. 2 Double-click the folder you want to open. 3 In the To o l s menu, select Folder Options. The Folders Options box appears. 4 In the T asks section, click the button for Show common tasks in f olders .
174 Exploring Y our Options Using your computer at the off ice 5.375 x 8.375 ver 2.4.0 Using your computer at the office By connecting an external monitor , external full-size ke yboard and an external mouse, you ca n work with your notebook as if it were a st andard off ice computer .
175 Exploring Y our Options Exchanging data with another computer 5.375 x 8.375 ver 2.4.0 5 Click Next . 6 Select Connect directly to another computer . 7 Choose the ap propriate ro le for your computer: ❖ Guest ❖ Host 8 Follo w the on-screen instructions.
176 Exploring Y our Options Exchanging data with another computer 5.375 x 8.375 ver 2.4.0 The follo wing procedure is intended to support you if yo u need to either upgrade y our modem or reset the port to the default setti ngs.
177 Exploring Y our Options Exchanging data with another computer 5.375 x 8.375 ver 2.4.0 9 Close the Control Panel. Connecting your computer to a network Y ou can connect your computer to a network to increase its capabilities and functionality .
178 Exploring Y our Options An overview of using the Internet 5.375 x 8.375 ver 2.4.0 Accessing the wireless modules using your system tray This information applies to sy stems with the optional W i-Fi Mini PCI modul e. NOTE: T o install the Wi-Fi option at a later time, contact your T oshiba Authorized Service Provider .
179 Exploring Y our Options An overview of using the Internet 5.375 x 8.375 ver 2.4.0 ❖ Internet features ❖ Uploading and do wnloadi ng files from the Internet For more information ab out the Internet, see “Lesson 3: Learning about the Internet” on page 144 .
180 Exploring Y our Options An overview of using the Internet 5.375 x 8.375 ver 2.4.0 Connecting to the Internet using a telephone line T o connect to the Internet, you need: ❖ A modem ❖ A W eb browser ❖ A telephone line ❖ An Internet Service Provider (ISP) account Once you ha ve established an ISP account, you can access the Internet.
181 Exploring Y our Options An overview of using the Internet 5.375 x 8.375 ver 2.4.0 Internet features The Internet of fers many type s of communication tools to help you perform man y tasks. ❖ Internet email T o send and receiv e email of your own, you need a mailbox on the W e b, or an email address.
182 Exploring Y our Options T oshiba’ s on line r esources 5.375 x 8.375 ver 2.4.0 T oshiba’ s online resources T oshiba maintains a number of online sites to which you can connect. These sites provide information about T oshiba products, gi ve help with technical questio ns, and keep yo u up to date with future upgrades .
183 Exploring Y our Options Explorin g audio featur es 5.375 x 8.375 ver 2.4.0 page 32 . Connect the red and white RCA-type connectors of the audio cable’ s “Y” e nd to the corresponding jacks on the tele vision. 3 Press Fn and F5 repeatedly to select the TV -only display option.
184 Exploring Y our Options Explor ing audio fe atur es 5.375 x 8.375 ver 2.4.0 CDs using the b u ilt-in speakers, h eadphones or external speakers. Recording sounds Y ou can make audio recordings and sav e them as .
185 Exploring Y our Options Explorin g audio featur es 5.375 x 8.375 ver 2.4.0 Sample Sound Recorder scr een 3 Click the Record b utton and speak no rmally into the microphone. NOTE: Y ou can only record 60 seconds at a time. 4 When you ha ve f inished recording, click the Stop b utton.
186 Exploring Y our Options Explor ing audio fe atur es 5.375 x 8.375 ver 2.4.0 3 In the Audio Properties windo w , adjust the Sound Playback quality and v olume , and the Sound Recording vol u m e. 4 Click OK . Y our new settings tak e effe ct the next time you record.
187 Exploring Y our Options Using PC Car ds 5.375 x 8.375 ver 2.4.0 3 Adjust the v olume: ❖ For e xternal speakers, use the volume controls on each speaker . ❖ For headphones, use the computer’ s volume control dial. Using PC Cards PC Cards expand your computer’ s capabilities and usefulness.
188 Exploring Y our Options Using PC Car ds 5.375 x 8.375 ver 2.4.0 Inserting PC Cards Inserting a PC Car d 1 If your PC Card does not support hot swapping , sav e your data and turn off the co mputer before inserting the PC Card. For more i nformation, see “Hot swapping” on page 189 .
189 Exploring Y our Options Using PC Car ds 5.375 x 8.375 ver 2.4.0 Removing PC Cards 1 Click the Safely Remove Hard ware icon on the System tray . 2 Click Safely remove xxxx , wher e xxxx is the identifier for your PC Card. The operating system advise s yo u that you may safely remov e the card.
190 Exploring Y our Options Using PC Car ds 5.375 x 8.375 ver 2.4.0 ❖ Ne ver remo ve a network card while you are connected to a network. ❖ Ne ver remo ve a SCSI card while any of the SCSI de vices connected to it are operating. DEFINITION: SCSI is an acronym for Small Computer Systems Interface.
191 5.375 x 8.375 ver 2.4.0 Chapter 7 T oshiba Utilities Y our computer includes sev eral utilities designed to help you to conf igure your system to best meet your individual needs. T ogether, these allo w you to ascertain certain system details, set additional options, or change default options.
192 T oshiba Utilities Fn-esse 5.375 x 8.375 ver 2.4.0 Using Accessibility enables you to make the Fn k ey a stic ky key , meaning you can press it once , release it and then press a function ke y to activ ate the hot ke y function. T o open Accessibility: 1 Click Start , then click All Pr ograms .
193 T oshiba Utilities Fn-esse 5.375 x 8.375 ver 2.4.0 and folders from within an y program without using the Start menu. This section describes ho w to use the Fn-esse program to quickly access your prog rams and f iles. For in formation on creating operating system shortcuts, see “Lesson 9: Creating shortcuts” on page 154 .
194 T oshiba Utilities Fn-esse 5.375 x 8.375 ver 2.4.0 ❖ Assigned ke ys and ke ys as sociated with a popup list are sho wn on the Fn-esse ke yboa rd in the selected color .
195 T oshiba Utilities Fn-esse 5.375 x 8.375 ver 2.4.0 Using the keyboard or T ouchPad T o assign a key to open a program or docu ment: 1 Start Fn-esse. 2 Perform one of the follo wing: ❖ Using the ke yboard, press and hold the Fn key , the n press the desired assign ment key .
196 T oshiba Utilities Hotke y ut ility 5.375 x 8.375 ver 2.4.0 do this, refer to your operating system documentation. ❖ Click OK to associate the folder with the k ey you just selected. ❖ T o open a popup list showing the items in that folder , press Fn plus the appropriate key .
197 T oshiba Utilities TOS H I BA Co n s o l e 5.375 x 8.375 ver 2.4.0 Sample T oshiba Hotke y utility window 4 Put a check mark next to the desired option. 5 Click OK . TOSHIBA Console The TOSHIB A Console provides quick access to co mputer functions and allo ws you to customize a range of computer settings.
198 T oshiba Utilities TOSHIB A Console 5.375 x 8.375 ver 2.4.0 Sample TOSHIB A Console win dow The T OSHIB A Console offers tw o categories of features: ❖ Customize Y our Computer ❖ Security Customize Y our Computer The features av ailable in this category are: ❖ Po wer Management (See “Po wer Management” on page 199 .
199 T oshiba Utilities TOS H I BA Co n s o l e 5.375 x 8.375 ver 2.4.0 Security The fea tures av ailable in this category are: ❖ Supervisor password ❖ User password Power Management The Po wer Man.
200 T oshiba Utilities TOSHIB A Console 5.375 x 8.375 ver 2.4.0 Sample TOSHIB A P ower Saver Pr operties window The Po wer Save Modes tab sho ws the power usage modes for both A C power (“Plugged in”) and batte ry power (Running on batteries”). Y ou can either use one of the preset modes or create and use your own customized mode.
201 T oshiba Utilities TOS H I BA Co n s o l e 5.375 x 8.375 ver 2.4.0 The windo ws and settings fo r creating and customizing battery power modes are describe d in the following sections.
202 T oshiba Utilities TOSHIB A Console 5.375 x 8.375 ver 2.4.0 This tab enables you to choose an icon for your po wer usage mode, describe the mo de’ s characteristics and, op tionally , associate it with a program. The Name field displays the name assigned to the mode in the Po wer Sav er Properties window .
203 T oshiba Utilities TOS H I BA Co n s o l e 5.375 x 8.375 ver 2.4.0 Sample TOSHIB A Contr ols Pr operties window 2 Click the Buttons tab 3 Check the boxes for the T OSHIBA Console b utton and/ or the Internet button. 4 Under Select a Program, ma ke the desired selections.
204 T oshiba Utilities TOSHIB A Console 5.375 x 8.375 ver 2.4.0 Sample TOSHIB A HWSe tup window The TOSHIB A HWSetup window appears with tabs for the follo wing: ❖ Display — Allo ws you to select the b uilt-in LCD and/or external monitor when the computer powers on.
205 T oshiba Utilities TOS H I BA Co n s o l e 5.375 x 8.375 ver 2.4.0 ❖ K eyboard — Allows you to enable or disable the “wak e- up on ke yboard” feature. The feature allo ws you to “wake” the machine from Standby mode by pressing a key . ❖ USB — Allo ws you to enable or disable USB Le gacy Emulation.
206 5.375 x 8.375 ver 2.4.0 Chapter 8 If Somet hing G oes Wron g Some problems you may encounter wh en using your notebook computer are relati vely easy to identify and solv e. Others may require help from your dealer , your network administrator or the manuf acturer of a software program.
207 If Something Goes Wrong Pr oblems that ar e easy to fix 5.375 x 8.375 ver 2.4.0 T o close a program that has stopped responding: 1 Press Ctrl , Alt , and Del simultan eously (once). 2 Click the Applications tab . If a program has stopped res ponding, the words “not responding” appear besi de its name in the list.
208 If Someth ing Goes W rong Pr oblems when you turn on the computer 5.375 x 8.375 ver 2.4.0 6 Sa ve the f ile and refer to it when you contact the software manufacturer . Problems when you tu rn on the computer These problems may occur when yo u turn on the po wer .
209 If Something Goes Wrong The W indows ® operating system is not working 5.375 x 8.375 ver 2.4.0 internal or external diskette dri v e, press the left or right arrow ke y and choose your boot-up de vice. HINT : Press F12 as you power on the compute r to access the menu.
210 If Someth ing Goes W rong The W i ndows ® operating system is not working 5.375 x 8.375 ver 2.4.0 ❖ The screen does not look right. Unless a hardware de vice has failed, probl ems usually occur when you change the system in some way such as installing a new program or adding a device.
211 If Something Goes Wrong The W indows ® operating system is not working 5.375 x 8.375 ver 2.4.0 ❖ Return to OS Choices (menu) See your W indo ws ® documentation for fu rther expl anation. TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode.
212 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 The Help and Support Center window appears. 2 Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follo w the on-screen instructions.
213 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 you add each device, test it to make sure it and all pre viously connected devices work. The device most recently connec ted to the system is the one most likely to be causing a hardware conf lict.
214 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 Resolving conflicts There are three things you can do to resolve hardware conflicts: ❖ Disable the device.
215 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 6 Click the icon. Y ou are giv en the option of disabling the de vice. 7 Click yes or no , whichev er is appropriate. Checking device properties Device Manager provides a w ay to view the properties of a de vice.
216 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 Memory module problems CAUTION: Static electricity ca n damage the memory module. Before you han dle the module, touch a grounded meta l surface to discharge any static electricity you may have built up.
217 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 Power and the batteries Y our computer receives its po wer through the A C adapter and po wer cable or from the sy stem batteries (main battery and real-time clock (R TC) battery).
218 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 The battery appears not to power the computer f or as long as it usually does. If you frequently rechar ge a pa rtially charged battery , it may not charge full y . Let the batte ry discharg e completely , then try charging it again.
219 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 Display problems Here are some typical display problems and their solutions: The display is blank. Display Auto Off may ha ve gone into effect. Press an y key to activ ate the screen.
220 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 ❖ Make sure the display choice is not set f o r the b uilt-in screen only . The screen does not look right. Y ou can change the display settings by clicking a blank area of the desktop with the secondary control b utton, then clicking Properties.
221 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 The display mode is set to Si multaneous and the external display device does not w ork. Make sure the e xternal monitor is capable of displaying at resolutions of 800 x 600 or hi gher .
222 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 ❖ Automatically f ix file system errors ❖ Scan for and attempt recov e ry of bad sectors 6 Click Start . Error- checking runs the test. Y our hard disk seems very slow .
223 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 The computer displays the Non-system disk or disk err or message . If you are starting the computer from a disk ette (for systems with a diskette dri ve), the diskette in the dri ve does not ha ve the files necessary to start the computer .
224 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 T o remove a disc without tu rning on the computer , use a narrow object, such as a straightened paper clip, to press the manual eject butt on. This b u tton is in the small hole ne xt to the disc eject b utton on the right side of th e computer .
225 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 Most PC Card problems occur during installation and setup of ne w cards. If you’ re having trouble getting one or more of these de vices to work together , several sections in thi s chapter may apply .
226 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 ❖ Occasionally a defecti ve PC Card slips through quality control. If another PCMCIA -equipped compute r is a v ailable, try the card in that machine. If the card malfunctions again, it may be defecti ve.
227 If Something Goes Wrong Resolving a har dwar e conflict 5.375 x 8.375 ver 2.4.0 1 Click the Safely Remove Hard ware icon on the System tray . 2 Click Saf ely remove xxxx , where xxxx is the identifier for your PC Card. The operating system display s a message that you may safely remov e the card.
228 If Someth ing Goes W rong Resolving a hardwar e conflict 5.375 x 8.375 ver 2.4.0 Make sure you installed the proper printe r dri vers, as sho w n in “Setting up a printer” on page 73 . Y ou may hav e connected the prin ter while the computer is on.
229 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.4.0 higher . Refer to the program’ s documentation and the modem guide for information on ho w to change these settings. TECHNICAL NOTE: Disable Call W aiting before you connect through the modem.
230 If Someth ing Goes W rong If you need further assistance 5.375 x 8.375 ver 2.4.0 Some people use a combination of these methods, backing up all files to tape weekly and co pying critical f iles to diskette on a daily basis. If you ha ve installed your o wn programs, you should back up these programs as well as your data files.
231 If Something Goes Wrong If you need further assistance 5.375 x 8.375 ver 2.4.0 ❖ If the problem occurs wh ile you are running a program, consult the program’ s do cume ntation for troubleshooting suggestions. Contact the soft ware co mpany’ s technical support group for their assistance.
232 If Someth ing Goes W rong Other T oshiba Internet W eb sites 5.375 x 8.375 ver 2.4.0 ❖ Information about what yo u were doing when the problem occurred.
233 If Something Goes Wrong T oshiba’ s worldwide off ices 5.375 x 8.375 ver 2.4.0 T oshiba’ s worldwide offices A ustralia T oshiba (Australia) Pty . Limited 84-92 T alavera Road North Ryde NSW 2113 Sydney Australia Au s t r i a T oshiba Europe GmbH Handelskai 388 1020 W ien, Austria Belgium T oshiba Information Systems Benelux (Belgium) B.
234 If Someth ing Goes W rong T oshiba’ s worldwide off ices 5.375 x 8.375 ver 2.4.0 Luxembourg T oshiba Information Systems Benelux B.V . Riv ium Boulev ard 41 2909 LK, Capelle a/d IJssel The Netherlands Mexico and all of Latin America T oshiba de México S.
235 If Something Goes Wrong T oshiba’ s worldwide off ices 5.375 x 8.375 ver 2.4.0 Sweden Scribona PC AB Sundbyber gsväegen 1 Box 1374 171 27 Solna Sweden Switzerland Ozalid A G Herostrasse 7 8048 Zürich Switzerlan d United Kingdom T oshiba Information Systems (U.
236 5.375 x 8.375 ver 2.4.0 Appendix A Hot Keys Hot keys are keys tha t, w hen pr essed in combination with the Fn ke y , turn system functions on and of f. Hot ke ys hav e a legend on or abo ve the ke y indicating the option or feature the ke y controls.
237 Hot Keys Instant passwor d security 5.375 x 8.375 ver 2.4.0 Instant password security Without a password The Fn + F1 key combination turns of f the display and activ ates instant security . Using the pointing de vice or any key will make the display’ s content reapp ear, if no passw ord is set for the current user .
238 Hot Keys Instant passwor d security 5.375 x 8.375 ver 2.4.0 6 Click OK . Maintaining security when t he batter y isn’t fully charged When the battery is not fully ch arged (e ven if t he computer is operating on A C power) your display ma y reappear automatically after a short time.
239 Hot Keys Po w e r u s a g e m o d e 5.375 x 8.375 ver 2.4.0 Power usage mode Fn + This hot ke y displays the power usage pop -up win- do w and cycles through the battery save mo des.
240 Hot Keys Standby mode 5.375 x 8.375 ver 2.4.0 Standby mode Fn + This hot ke y puts the computer into Standby mode. ❖ A message box is displayed b y default to confirm that the computer is going into Standby mode. Click the check box to pre vent the message box appearing in future.
241 Hot Keys Hibernation mode 5.375 x 8.375 ver 2.4.0 Hibernation mode Fn + This hot ke y puts the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to conf irm the computer is going into Hibernation mode.
242 Hot Keys Display modes 5.375 x 8.375 ver 2.4.0 Display modes Fn + This hot ke y cycles through the po wer-on display options. While hold ing down Fn , press F5 repeatedly until the setting you want takes ef fect. Then release the Fn key . NOTE: This hot key does not function while WinDVD is playing.
243 Hot Keys Display brightness 5.375 x 8.375 ver 2.4.0 Display brightness Disabling or enabling the T ouchPad Keyboard hot keys Fn + The Fn + F6 hot ke y decreases the screen brightness. Fn + The Fn + F7 hot ke y increases the screen brightness. Fn + This hot ke y disables or enables the T ouc hPad.
244 5.375 x 8.375 ver 2.4.0 Appendix B Power Cable Connectors Y our notebook computer features a uni versal po wer supply you can use worldwide. This appendix sho ws the shapes of the typical A C po wer cable connectors for various parts of the world.
245 5.375 x 8.375 v er 2.4.0 Glossar y TECHNICAL NOTE: Some features de fined in this glossary may not be available on your computer . Acronyms The follo w ing acronyms may appear in this user’ s guide.
246 Glossary 5.375 x 8.375 v er 2.4.0 DMA direct memory access DIMM dual inlin e memory modul e DOS disk operating system DPI dots per inch DSTN dual supertwist nem atic DV D digital versatile (or vid.
247 Glossary 5.375 x 8.375 v er 2.4.0 RAM random access memory RFI radio frequency interference RO M read-only memory RT C real-time clock SCSI small computer system interface SDRAM synchronous dynami.
248 Glossary 5.375 x 8.375 v er 2.4.0 application — A computer program that yo u use to perform tasks of a specific type. Applicatio ns include word processors, spreadsheets, and database ma nagement systems. See also pr ogram . B backup — A copy of a file, usually on a remov able disk, kept in case the original file is lost or damaged.
249 Glossary 5.375 x 8.375 v er 2.4.0 bus — A n electrical circuit that co nnects the central processing unit (CPU) with other parts of the computer , such as the video adapter , disk drives, and ports. It is the pathw ay through which data flows from one de vice to another .
250 Glossary 5.375 x 8.375 v er 2.4.0 color palette — A set of speci fied colors that establishes the color s that can be displayed on the screen at a particular time. compatibility — Th e extent to which computers, programs, or devices can w ork to gether harmoniously , using the same commands, formats, or language as anot her .
251 Glossary 5.375 x 8.375 v er 2.4.0 direct memor y access (DMA) — A dedicated ch annel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder . disable — T o turn a computer option of f. See also en able .
252 Glossary 5.375 x 8.375 v er 2.4.0 DV D — An individual digital versatile (or video) disc. See also DV D - RO M . D VD-ROM (digital ver satile disc r ead-only memory) — A very high-capacity storage medium that uses laser optics for reading data.
253 Glossary 5.375 x 8.375 v er 2.4.0 fo l d e r — Also called directory . A container for organizing f i les sav ed to a disk. A folder is sym bolized on screen by a graphical image (icon) of a f ile folder . A folder can contain files and other folders.
254 Glossary 5.375 x 8.375 v er 2.4.0 high-density di skette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in w hich certain keys in combin ation with the Fn key can set system options or control system parameters, such as the battery sav e mode.
255 Glossary 5.375 x 8.375 v er 2.4.0 liquid crystal disp lay (LCD) — A type of display that uses a liquid substance between two tran sparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pa ttern that polarizes the light passing through it.
256 Glossary 5.375 x 8.375 v er 2.4.0 MS-DOS pr ompt — See system pr ompt. multimedia — A combin ation of two or more media, such as sound, animation, and video in a co mputer program or presentation. Musical Instrument Digital Interface — See MIDI.
257 Glossary 5.375 x 8.375 v er 2.4.0 PC Card — A credit-card-sized expansion card designed to increase the capabilities of no tebook computers. PC Cards provide functions such as modem, fax/modem, hard di sk driv e, network adapter , sound card, or SCSI adapter .
258 Glossary 5.375 x 8.375 v er 2.4.0 rem ovabl e disk — A disk that can be removed from a disk driv e. A diskette is one e xample of a remov able disk. res o lu t io n — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
259 Glossary 5.375 x 8.375 v er 2.4.0 Standby — A feature of some Windo ws ® operating systems that allows you to turn of f the com puter without exiting your open applications and to continue from where you left off when you turn the computer on again.
260 Glossary 5.375 x 8.375 v er 2.4.0 W We b — See W orld W ide W eb . Wi- F i — A trad emarked term by the W ireless Capability Ethernet Alliance which stan ds for W ireless Fidel ity . W i-Fi is another term for the IEEE 802.11b or 802.11a/b communication pro tocol to permit an Ethernet connection using wireless communi cation components.
261 5.375 x 8.375 v er 2.4.0 Index A A C adapter 6 3 A C p o we r l ig ht 39, 63 , 67 Accessories programs 1 6 2 adding memory 5 1 alarms low battery 1 3 0 audio CDs playing 9 1 audio features 1 8 3 ,.
5.375 x 8.375 v er 2.4.0 262 Index previous track 4 0 primary control 3 7 , 7 1 secondary control 37 , 7 1 S ta rt 138 stop 4 0 TOSHIB A C onsole 3 8 , 8 5 C calculator 1 5 4 CD control buttons 9 3 CD.
5.375 x 8.375 v er 2.4.0 263 Index external speak ers 1 8 6 headphones 1 8 6 m od em 10 2 po wer cable 6 4 television 59 to a network 1 0 3 USB-compatible keyboard 62 mouse 5 8 conserving battery powe.
5.375 x 8.375 v er 2.4.0 264 Index problems 2 2 3 removing a disc 1 0 0 troubleshooting 2 1 5 D VD s 32, 37, 91 p la yi ng 183 E email 1 8 1 emulating a full-size ke yboard 8 5 en vironmental consider.
5.375 x 8.375 v er 2.4.0 265 Index headphones connecting 1 8 6 Help 1 6 3 W indows XP 2 1 1 Hibernation low battery 1 3 0 Hibernatio n command 1 0 5 enabling 1 1 1 Hibernatio n mode 1 0 5 m et ho ds 1.
5.375 x 8.375 v er 2.4.0 266 Index lights A C po we r 39, 63, 67 b at te ry 39, 67, 127 cursor control mode 3 8 disk/disc acti vity 4 0 diskette acti v ity 8 8 diskette dri ve 4 0 hard disk driv e 3 9.
5.375 x 8.375 v er 2.4.0 267 Index parallel port 3 3 password power -on 6 8 PC Card checklist 2 2 5 CIS (Card Inform ation Structur e) 225 computer stops working 2 2 6 eject button 3 6 e rr or s 227 h.
5.375 x 8.375 v er 2.4.0 268 Index external display not work ing 2 2 1 external keyboard not working 218 external monitor 2 1 9 fault y memory 2 16 h ar dw a r e c on fl ic t 212, 21 3 high-pitched no.
5.375 x 8.375 v er 2.4.0 269 Index screen 3 8 blank 2 1 9 doesn’t look normal/flickers 2 2 0 Screen Saver tab 1 5 8 SCSI (Small Computer System s Interface) 19 0 Search Engine 1 8 0 secondary contro.
5.375 x 8.375 v er 2.4.0 270 Index T ouchPad 3 7 disabling or enabling 7 1 , 2 4 3 u si n g 70, 14 0 trav elling ti ps 1 3 5 Tu r n O f f using 1 0 6 T ur n Of f c o m ma nd 10 4, 108 T urn Off method.
5.375 x 8.375 v er 2.4.0 271 Index tours and tutorials 1 6 5 W inDVD 18 3 wireless features antenna 3 4 W i- Fi 178 wireless networkin g 1 7 7 , 1 7 8 W izards Add Printer 7 3 Network Setup 1 0 3 New .
デバイスToshiba 1410-S105の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba 1410-S105をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 1410-S105の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 1410-S105の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 1410-S105で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 1410-S105を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 1410-S105の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 1410-S105に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 1410-S105デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
