ToshibaメーカーB-443の使用説明書/サービス説明書
ページ先へ移動 of 35
TEC Bar Code Printer B-443 Owne r ’ s Manual.
LIST OF STANDARDS OF CONFORMITY Manufacturer : TOSHIBA TEC Corporation Address : 570 Ohito, Ohito-cho, Tagata-Gun, Shizuoka-ken, 410-2392 Japan declares that following product Product Name : Bar Code .
EO1-33013 i CAUTION: 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. 3. Please refer to your local Authorized Service representative with regard to any queries you may have in this manual.
EO1-33013 ii CONTENTS 1. PRODUCT INTRODUCTION ................................................................ 1 1.1 Compliances ..................................................................................................... 1 2. GETTING STARTED .
EO1-33013 iii 5.2 Options ........................................................................................................... 26 5.3 Supplies .....................................................................................................
iv EO1-33013 Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment.
v EO1-33013 CAUTION This indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication.
EO1-33013 1 1. PRODUCT INTRODUCTION Thank you very much for purchasing TEC B-443 bar code printer. The attractive desktop printer delivers superior performance at an economical price. Both powerful and easy-to-use, B-443 printer is your best choice among desktop direct thermal and thermal transfer label printers.
EO1-33013 2 2. GETTING STARTED 2.1 Applicable Model B - 4 4 3 – Q P Destination Code QP: Europe GH12-GB: UK 2.2 Unpacking and Inspection The printer has been specially packaged to withstand damage in the shipping process.
EO1-33013 3 l Portable LCD keyboard If any parts are missing, please contact the Customer Service Department of your purchased reseller or distributor.
EO1-33013 4 2.4 Printer Parts Figure 1. Top front view 1. Cover Release Button 2. PWR., ON-LIN E and ERR. Indicators 3. PAUSE Button 4. FEED Button 5. Label Dispense Opening 6.
EO1-33013 5 Figure 2. Interior view 1. Printer Cover (in open position) 2. PAUSE Button 3. PWR., ON-LINE, ERR. Indicators 4. FEED Button 5. Ribbon Mechanism 6. Printer Carriage Release Lever 7. Peel-Off Sensor 8. Backing Paper Opening 9. Detachable Front Panel 10.
EO1-33013 6 Figure 3. Rear view 1. Power On/Off Switch 2. Power Supply Connector 3. RS-232 DB-9 Interface Connector 4. Centronics Interface Connector 5.
EO1-33013 7 2.5 External La bel Roll Mount Figure 4. External label roll mount.
EO1-33013 8 2.6 Buttons and Indicators PWR. (POWER) Indicator The green PWR. indicator illuminates when the POWER switch is turned on. ON-LINE Indicator The green ON-LINE indicator illuminates when the printer is ready to print. When PAUSE button is pressed, the ON-LINE indicator flashes.
EO1-33013 9 3. SET UP 3.1 Sett ing Up the Printer 1. Place the printer on a flat, secure surface. 2. Make sure the POWER switch is off. 3. Connect the printer to the computer mainframe with the provided RS-232C or Centronics cable.
EO1-33013 10 Figure 5. Inserting label supply roll into label roll mount 1. Label Supply Roll Spindle 2. Label Roll Mount 3. Fixing Tabs 4. Label Roll 4 2 3 2 1.
EO1-33013 11 Figure 6. Feed labels through adjustable label guide 1. Printer Carriage Release Lever 2. Platen 3. Label Media 4. Adjustable Label Guide 4 2 1 3.
EO1-33013 12 3.3 Self-Peeling Function To employ the self-peeling function, load the label stock according to the following steps. 1. Remove the front panel. 2. Tear off the foremost one or two labels of the label stock, as befits the case. Feed the backing paper between the platen and the white “ self-peeling ” roller, as shown in Figure 7.
EO1-33013 13 Figure 8. Printer ready for self-peeling function 1. Printer Carriage Release Lever 2. Printer Front Panel 3. Backing Paper 4. Backing Paper Opening 5.
EO1-33013 14 3.4 Ribbon Loading Instructio ns 1. Place an empty paper core on the ribbon rewind spindle. 2. Install the ribbon on the ribbon supply spindle. 3. Disengage the printer carriage. 4. Pull the ribbon leader to the front from beneath the printer carriage.
EO1-33013 15 Figure 9. Placement of ribbon supply roll 1. Ribbon Supply Spindle 2. Ribbon Rewind Spindle 3. Printer Carriage Release Lever 4. Thermal Transfer Ribbon 3 1 2 4.
EO1-33013 16 Figure 10. Installation of label stock and thermal transfer ribbon.
EO1-33013 17 3.5 Install External Label Roll Mount Figure 11. Installation of external label roll mount 1. Label Supply Roll Spindle 2. External Label Roll Mount 3.
EO1-33013 18 3.6 Install Memory Module 1. Power off the printer. 2. Remove the cov er. 3. Insert the memory module. 4. Put the cover back. 5. Turn on the power Figure 12.
EO1-33013 19 3.7 Self Test To initiate the self test mode, depress the FEED button while turning on the printer power. The printer will calibrate the label length. If the label gap is not detected within 7", the printer stops feeding labels and the media is treated as continuous paper.
EO1-33013 20 3.8 Dump Mode After the self test, the printer enters the dump mode. In this mode, any characters sent from the host computer will be printed in two columns, as shown. The characters received will be shown in the first column, and their corresponding hexadecimal values, in the second.
EO1-33013 21 4. USING B-443 4.1 Power-on Utilities There are three power-on utilities to set up and test B-443 hardware. These utilities are activated by pressing the FEED or PAUSE button and turning on the printer power simultaneously. The utilities are listed as below: 1.
EO1-33013 22 4.1.3 Printer Initialization Printer initialization clears all downloaded files resident in flash memory, and sets printer parameters to default values.
EO1-33013 23 4.2 Error Messages Syntax Error The command format is incorrect. The serial port setting is incorrect. Out of Range Numeric input is too large to be processed. The input string is too long to be stored. The size of the text or bar code exceeds that of the label.
EO1-33013 24 4.3 Troubleshooting Guide The following guide lists some of the most common problems that may be encountered when operating the B-443 bar code printer.
EO1-33013 25 5. SPECIFICATIONS, OPTIONS, & SUPPLIES 5.1 Specifications 5.1.1 Printer l Type: Direct thermal or thermal transfer l Print speed: Selectable speeds of 1.5, 2.0 or 3.0 inches per second l Resolution: 203 DPI (8 dots per mm) l Font styles: Five alphanumeric fonts from 0.
EO1-33013 26 5.1.5 Environment l Operating temperature: 40 o F to 104 o F (5 o C to 40 o C) l Storage temperature: 40 o F to 140 o F (5 o C to 60 o C) l Humidity: 10% to 95% non-condensing l Ventilation: Free air movement 5.1.6 Printer Body l Dimensions: 6.
EO1-33013 27 5.3 Supplies 5.3.1 Label Stock B-443 is capable of both direct thermal and thermal transfer printing. Many different direct thermal or thermal transfer stocks can be used. Refer to the following list for specifications of compatible label media.
PRINTED IN TAIWAN EO1-33013 9910 100 TSC E.
デバイスToshiba B-443の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba B-443をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba B-443の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba B-443の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba B-443で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba B-443を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba B-443の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba B-443に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba B-443デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。