ToshibaメーカーIK-TF2の使用説明書/サービス説明書
ページ先へ移動 of 32
For Customer Use Enter below the Serial No . which is located on the bottom of the cabinet. Retain this inf or mation for future ref- erence. Model No .: IK-TF2 Serial No .: 3 CCD CAMERA IK-TF2 INSTR UCTION MANU AL W ARNING This is a Class A of EN55022 product.
2 SAFETY PRECAUTIONS Read the f ollowing saf ety precautions carefully bef ore using this product. These instructions contain valuab le information on saf e and proper use that will prev ent harm and damage to the operator and other persons.
3 Caution • Note the following instructions when installing. • Do not put an inflammab le mater ial on the product. • Do not put the product on an Inflammable material such as carpet or blanket. • Do not bloc k a vent hole. • Do not put the product in a narrow space , since the heat generated from the product ma y be difficult to emanate.
- 4 - 1 CAUTIONS ON USE AND INSTALLATION ........................................... 6 2 COMPONENTS ...................................................................................... 6 3 ITEMS CONTROLLED BY USING ON SCREEN DISPLAY ....
- 5 - (6) OPTION ..................................................................................................................... 22 (6.1) Changing RS232C communication baud rate ................................................... 22 (7) Setting to factory setting status .
- 6 - Carefully handle the units. Do not drop, or give a strong shock or vibration to the camera. This may cause problems. Treat the camera cables carefully to prevent cable problems, such as cable breakdown and loosened connections. Do not shoot intense light.
- 7 - Item Available selections Preset value (Factory setting) MODE MANUAL, SS, EXT TRIG MANUAL EXT TRIG 1PULSE SNR 1PULSE SR 2PULSE 1PULSE SNR MANUAL speed OFF 1/100s 1/250s 1/500s 1/1000s 1/2000s 1/4000s 1/10000s 1/25000s 1/50000s OFF Syncro.
- 8 - ① Prism faceplate ⑨ RGB terminal ② DISP button ③ P AGE button ④ MENU UP button ⑤ MENU DOWN button ⑥ DA T A UP(A WB) button ⑦ DA T A DOWN button ⑧ DC IN 12V terminal DISP PAGE DC IN 12V RGB MENU DATA (AWB) ［ Front ］［ Rear ］ Prism faceplate The protection cap is attached on the lens mount portion.
- 9 - When connecting the camera cables, be sure to turn off the camera and the other equipment connected. We suggest using a C mount lens made for a 3CCD camera. When using another lens, the best camera performance of this camera may not be obtained.
- 10 - Referring to the item “ 5. CONNECTION ” , connect each equipment correctly. Turn on the connected equipment and the camera. Pointing the lens at the object, operate the lens iris adjustment, focus adjustment, etc.. Referring to the item “ 6.
- 11 - Display Meaning AWB OK Automatic white balance adjustment finished correctly. AWB NG LEVEL LOW Automatic white balance adjustment cannot be performed because the video level is too low. Set the video level properly. AWB NG LEVEL HIGH Automatic white balance adjustment cannot be performed because the video level is too high.
- 12 - When the image is dark even if the lens iris is open, change the gain (video gain) t o get the proper video level. For the gain adjustment of the unit, MANUAL (M anual) and OFF (0 dB) modes are provided. Select the mode on the GAIN menu. (Refer to the item “ 7.
- 13 - Various settings can be controlled o n the unit by using the on screen menu displayed on the monitor. The contents once set are memorized when the power is turned off, so it is unnecessary to set again when using the unit next time. When the setting is performed, select the menu of the item to be set.
- 14 - Select the menu to change the setting by referring the item “7.1 Using the Menus”.) When the [MENU UP], [MENU DOWN] buttons are pushed, the “ ” on the screen moves up and down.
- 15 - 1 2 Changing each setting in SS synchro. scan mode Shutter mod e M ANUAL, SS, EXT TRIG -- 1 SHUTTER -- Synchro.
- 16 - 1 3 Changing each setting in EXT TRIG mode The EXT TRIG has three modes; 1PULSE SNR, 1PULSE SR, 2PULSE. First set the “ ” to MODE and select EXT TRIG, then set the “ ” to EXT TRIG and select the desired EXT TRIG mode.
- 17 - 1 3 2 Changing each setting in 1PULSE SR mode Shutter mode MANU AL, SS, EXT TRIG -- 1 SHUTTER -- EXT TRI G mo de MODE.
- 18 - 1 3 3 Changing each setting in 2PULSE mode Shutte r mode MANU AL, SS, EXT TRIG - - 1 SHUTTER -- EXT TRIG mode MODE EX.
- 19 - 2 GAIN (Video gain) GAIN has two modes; MANUAL, OFF. Set the “ ” to MODE, push the [DAT A UP], [DATA DOWN], and select mode among M ANUAL, OFF.
- 20 - 3 WHT BAL(White balance) WHT BAL has two modes; AWB, MANUAL. Set the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select mode among AWB, MANUAL.
- 21 - 4 PROCESS Master pedestal adjustm ent -64 t o 64 R pedestal adjustm ent -64 to 64 -- 4 PROCESS -- B pedestal adjustment - 64 to 64 M.
- 22 - 5 SYNC When an external sync signal is input, the display changes from INT (internal sync) to EXT (external sync) automatically.
- 23 - 7 Setting to factory setting status The contents set of each scene file can be returned to the factory default status (preset status). (1) If characters are displayed on the screen, press the [DISP] button to disable the character display.
- 24 - 4 Changing HD/VD input/output (1) Put off 6 screws both on flank/top of camera chassis. (2) Change internal switch SJ01(HD/VD). SJ01 HD/VD OUTPUT HD/VD INPUT high-impedance HD/VD INPUT 75 Ω (factory setting) The shutter speed can be set by the horizontal scanning period (1H) or by the frame.
- 25 - Charge begins to accumulate after the trigger input, and 1 field or 1 frame images are output. There are three modes: 1PULSE SNR, 1PULSE SR and 2PULSE.
- 26 - (b) Width mode Trigger pulse level (Low Level) Less than 0.4V , (High Level) 3.4V to 5V Trigger pulse width More than 4 s Less than 255FRM Trigger pulse interval More than 33.
- 27 - 2 1 PULSE SR 1 Pulse Sync Reset Charge begins to accumulate after the trigger input to the RGB terminal, the vertical sync signal is reset and field images are output. (a) Rising edge / Falling edge mode The exposure time is set to 0.
- 28 - 3 2PULSE Accumulation of charges is started and ended through the trigger pulse input to the RGB terminal, the vertical sync signal is reset and field images are output. Trigger pulse level (Low Level) Less than 0.
- 29 - V reset V reset Pulse widt h mode A pprox.
- 30 - Symptom Items to be checked No image Is the power supplied correctly? Is the lens iris adjusted correctly? Are the cables connected correctly? Is the shutter mode set correctly?.
- 31 - Unit : mm [inch] 44 [1.73] 44 [1.73] 22 [0.87] 5 [0.20] 26 [1.02] 2-M3 Depth 3 6.3 [0.25] 78 [3.07] 5 [0.20] 56 [2.20] 5 [0.20] 26 [1.02] 25 [0.
LIMITED W ARRANTY TOSHIBA CCD CAMERA Promptly register your product with T oshiba on-line at www.toshiba.com/taisisd. By registering y our prod- uct you will be eligib le for periodic updates, announcements, and special off ers.
デバイスToshiba IK-TF2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba IK-TF2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba IK-TF2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba IK-TF2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba IK-TF2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba IK-TF2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba IK-TF2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba IK-TF2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba IK-TF2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
