ToshibaメーカーIK-WB01Aの使用説明書/サービス説明書
ページ先へ移動 of 64
For information on the latest products and peripheral devices, refer to the following Web page. ■ http://www.toshiba.com/taisisd The above URL is subject to change without prior notice. If the URL changes, refer to theToshiba website (http://www.toshiba.
2 Installation/Setup Others Operation Introduction T ested T o Comply W ith FCC Standards FOR HOME OR OFFICE USE Product Name : NETWORK CAMERA Model Number(s) : IK-WB01A, IK-WB11A FCC Notice "Dec.
3 Installation/Setup Others Operation Introduction Introduction Thank you for purchasing the IK-WB01A/IK-WB11A Network Camera. Before you start using the camera, read this User's Guide carefully to ensure correct usage. Once you have finished reading this User's Guide, keep it in a convenient place for future reference.
4 Installation/Setup Others Operation Introduction Accessories Confirm that all of the following accessories have been supplied with the network camera.
5 Installation/Setup Others Operation Introduction Table of Contents Introduction ● Introduction ............................................................................................................... 3 ● Table of Contents ................
6 Installation/Setup Others Operation Introduction IMPORTANT SAFETY INSTRUCTIONS When using this camera, always follow basic safety precautions to reduce the risk of fire, electric shock, or personal injury. 1 . Read and understand all the instructions.
7 Installation/Setup Others Operation Introduction Precautions for Use About the SD Memory Card(IK-WB11A only) ● There is a limit to the number of rewrites that is possible with the SD memory card. Replacing of the SD memory card when performing periodic maintenance of the camera is recommended.
8 Installation/Setup Others Operation Introduction Be sure to use only the supplied AC adaptor. Using a different AC adaptor may cause the camera to malfunction, heat up, or catch fire. Before using the AC adaptor, carefully read and observe the Important Safety Instructions (→ page 6) and the notes below.
9 Installation/Setup Others Operation Introduction Overview of the Network Camera The IK-WB01A/IK-WB11A network camera can deliver video images and sound in real time using the Internet or an intranet. The camera is equipped with Ethernet (RJ-45) 10BASE-T/100BASE-TX and wireless LAN IEEE 802.
10 Installation/Setup Others Operation Introduction Features of the Camera ● Supports wireless LAN The camera equips the wireless LAN IEEE 802.11b system.
11 Installation/Setup Others Operation Introduction ● High Sensitivity（IK-WB11A） The camera accomplishes highly sensitive night-time monitoring by using a slow-shutter speed (up to 4 seconds), Simple DAY/NIGHT function , and an auto sensitivity boost function.
12 Introduction Installation/Setup Operation Others Requirements for Network Camera Monitoring System ○ Administrator's personal computer This camera cannot be used by itself.
13 Introduction Installation/Setup Operation Others ○ Appropriate connection devices (hub, router, etc.) and LAN cab l e f o r t he network system environment ・ Not required if you are going to connect the personal computer and network camera directly using a wireless LAN.
14 Introduction Installation/Setup Operation Others Setting up the Network Camera Enviroment (Cont.) Names of Camera Parts（IK-WB01A） Front Side Bottom Rear Lens (Focal range: 35 cm to infinity) Le.
15 Introduction Installation/Setup Operation Others Names of Camera Parts (IK-WB11A) Front Side Bottom Rear Sun visor (→ page 19) (Accessory) Lens (Focal range: 80 cm to infinity) Lens cover (Transp.
16 Introduction Installation/Setup Operation Others The IK-WB01A is for indoor use only. The following explains the installation procedure. Set the wall attachment to the wall ・ Attach each of the four corners to the wall using four wood screws . Important ● Securely tighten the screws during installation to ensure not to become loosen.
17 Introduction Installation/Setup Operation Others Set the camera to the wall attachment Front view Front view Rear view Rear view Front Rear view Front view ① Place the camera to the wall attachment at the angle shown in the picture. ② Turn the camera counter-clockwise.
18 Introduction Installation/Setup Operation Others Some provided parts are required for installing the camera. ● Installing the camera indoors ・ Rear cover ● Installing the camera outdoors ・ .
19 Introduction Installation/Setup Operation Others Connect the AC adaptor cable and the LAN cable to the camera ・ For details, refer to "Connecting the Power Cord" (→ page 21) . ・ If you are going to use a wireless LAN, you need to connect the AC adaptor cable only.
20 Introduction Installation/Setup Operation Others Connect the AC adaptor cable and LAN cable to the camera ・ The procedure is the same as that described in "Indoor Installation" Step 3 on page 19. Attach the camera to the rear cover ・ The procedure is the same as that described in "Indoor Installation" Step 4 on page 19.
21 Introduction Installation/Setup Operation Others Connect the power cord to the AC adaptor Insert the AC adaptor plug into the camera power terminal Important ● There is not much space around the opening of the power terminal, so make sure that the plug is properly inserted.
22 Introduction Installation/Setup Operation Others As shown in the figure below, use a wire clamp to fix the plug in place ・ For the wire clamp, use the self-tapping screw supplied with the camera to hold. ・ When the plug is fixed in place, check that it will not become disconnected by a moderate amount of pulling.
23 Introduction Installation/Setup Others Operation ■ About the IP Address To connect to the network, the administrator needs to set the network camera IP address.
24 Introduction Installation/Setup Others Operation Connecting the Camera and Personal Computer by Network (Cont.) Using LAN Cable The following shows two different network configurations using a LAN cable connection to operate the network camera.
25 Introduction Installation/Setup Others Operation Using Wireless LAN The followings show different network configurations using a wireless LAN connection to operate the network camera. ■ When using adhoc method The adhoc method is used for connecting the network camera and a personal computer.
26 Introduction Installation/Setup Others Operation Connecting the Camera and Personal Computer by Network (Cont.) NO TE ● Information may be intercepted if you use a wireless LAN connection.
27 Introduction Installation/Setup Others Operation About Wireless LAN Connection There are two methods to establish the wireless LAN connection. 1. Cofiguring the wireless network environment for the camera's wireless LAN settings. 2. Cofiguring the camera's wireless LAN settings for the wireless network environment.
28 Introduction Installation/Setup Others Operation Connecting the Camera and Personal Computer by Network (Cont.) 4) Make sure of the reply from the personal computer to the network camera ● Start a command prompt. Type as "ping 192.168.
29 Introduction Installation/Setup Others Operation ■ Configuring the camera's wireless LAN settings for the wireless network environment Beforehand, connect the LAN cable (straight cable) to a hub that has the power turned on or connect the LAN cable (crossover cable) to a personal computer that has the power turned on.
30 Introduction Installation/Setup Others Operation 6) Plug in the camera a) Confirm that the settings are the same as the wireless network environment. ● When any settings are different from the wireless network enviromment, set the same values. b) Disconnect the LAN cable from the camera.
31 Introduction Installation/Setup Others Operation Configuring Settings for Wireless LAN To establish a wireless connection, it is necessary for the administrator to configure the appropriate wireless LAN settings. The administrator also needs to set the IP address.
32 Introduction Installation/Setup Others Operation Configure the communication mode ① Click ▼ for the "COM Mode" setting in the right side of the window.
33 Introduction Installation/Setup Others Operation NO TE ● This setting determines the speed of the network camera communi cating with other devices on the wireless LAN. The IEEE 802.11b standard supports the communication speeds of 1.0, 2.0, 5.5, and 11 Mbps.
34 Introduction Installation/Setup Others Operation The camera search application "Camera Finder" is an application for searching network cameras, that can currently be viewed from the administrator's personal computer or a user's personal computer, and connecting to those cameras.
35 Introduction Installation/Setup Others Operation Click the camera you want to login from the list of cameras ・ The chosen camera name and IP address is displayed in the Netwo rk camera log-in fields. To login as an administrator Click the "Administrator" button.
36 Introduction Installation/Setup Others Operation ● Entering an IP address manually ・ Enter an IP address manually if you are not using, or do not want to use the DHCP server. ・ If you use a DHCP server, the IP address changes from time to time.
37 Introduction Installation/Setup Others Operation Enter the camera name Important ● The camera name is displayed along with images in single-view or multi-view screens. If there are multiple cameras, enter a name that will make it easy to identify what the camera is monitoring.
38 Introduction Installation/Setup Others Operation Click the sav e button ・ The settings are registered. NO TE ● Clicking the reset button restores the previous configuration. ● The network camera has a feature (useful for multi view) that automatically detects, and remember other cameras on the same network.
39 Introduction Installation/Setup Others Operation Log-in ID and Password Be sure to change the default login ID and password. You are able to change important information and settings of the camera through the Administrator Login.
40 Introduction Installation/Setup Others Operation Log-in ID and Password (Cont.) In the Admin menu, click the toggle (+) of "Administrator Functions" ・ The sub menus appear. Click "Changing the Password" ・ The settings appear in the right side of the window.
41 Introduction Installation/Setup Others Operation Enter the login ID and password in the "Current Login ID", "Current Password", "New Login ID", "New Password", and "New Password (Confirm)" fields. Click the sav e button ・ The new login ID and password are saved in the network camera.
42 Introduction Installation/Setup Others Operation Administrator Operation The viewing of images, listening sound and operating cameras are not restricted to the administrator.
43 Introduction Installation/Setup Operation Others ● Admin Menu Screen Camera name Live button Displays images from the camera in single view. Exit button Closes the settings screen. Do not use X button to close the setting screen.
44 Introduction Installation/Setup Operation Others Screen Part Names and Functions (Cont.) ● Single View When you close the Single-View window, close the browser directly by pressing button. Camera name Alarm Notification Displayed when an alarm is detected.
45 Introduction Installation/Setup Operation Others ● Administrator Controller Close button Closes the controller. Camera name 1 shot Captures one image from camera. Back Light button Performs back light compensation. Zoom in button Enlarges camera images.
46 Introduction Installation/Setup Operation Others Screen Part Names and Functions (Cont.) ● Preset controller Preset Available/Unavailable Icon Displays whether the preset is configured. Preset Selection button Specifies preset. Preset name Go button Moves the lens to the preset camera position.
47 Introduction Installation/Setup Operation Others ● Record list controller (IK-WB11A) List number Displays List numbers from #1 to #168 (Max.) in 10s. Time and date of recording Play button Plays the images recorded at a time when things are normal.
48 Introduction Installation/Setup Operation Others For more details on the settings, please refer to the Advanced User's Guide at http://www.toshiba.
49 Introduction Installation/Setup Operation Others ２）Motion Sensor Item Function Sensitivity Size Detection Range Associate to P/T Operation Preset No Resume.
50 Introduction Installation/Setup Operation Others Setting Items (Cont.) ２）Normal Recording (Only Possible when SD Memory Card Inserted) Item Function Recording Cycle* Timer.
51 Introduction Installation/Setup Operation Others ■ Network Settings １．Network Connection Settings １）General Settings Item Camera Name Auto Identification of Other Camer.
52 Introduction Installation/Setup Operation Others Setting Items (Cont.) ３．Mail Settings １）Server Settings Item SMTP Server Name SMTP IP Address POP3 Server Name POP3 IP .
53 Introduction Installation/Setup Operation Others ７）Conditions for Sending Mail when Internal Battery Runs Out Of Power Item Send Mail When Internal Battery Runs out Out Of Power.
54 Introduction Installation/Setup Operation Others ４．Routing Table Settings Item Static Routing Table Settings IK-WB01A Configure the following settings for up to ten entries: destination a.
55 Introduction Installation/Setup Operation Others ２）FTP Server Setup IK-WB11A Enter the server name Enter the IP address Enter the User ID Enter the password Reenter the .
56 Introduction Installation/Setup Operation Others ２．Filtering Settings Item Filtering by MAC Address MAC Address IK-WB01A ON/OFF Enter up to 20 MAC addresses IK-WB11A ON/OFF.
57 Introduction Installation/Setup Operation Others ２．Setting the Time １）Time Zone Item Time Zone IK-WB01A GMT-12:00∼GMT+12:00 IK-WB11A GMT-12:00∼GMT+12:00 ２.
58 Introduction Installation/Setup Operation Others ■ Log Management １．Forwarding Settings Item Forward Log to Another Server Name of Destination Server IP Address of Destination Server.
59 Introduction Installation/Setup Operation Others Specifications *1: The sound may not be clear depending on the conditions of th e lines. *2: The image output is for checking the image during installation. Images and sounds are not deliverd, and recording function will not work during installation.
MEMO.
61 MEMO.
TOSHIBA AMERICA INFORMATION SYSTEMS. INC Imaging System Division 9740 Irvine Boulevard, Irvine California 92618-1697 PhoneNumber: (800)288-1354 V2.0.
63.
LIMITED W ARRANTY NETWORK CAMERA The Imaging Systems Division of T oshiba America information Systems, Inc. ("ISD") makes the following limited warranties with regard to this NETWORK Camera ("Product"). These limited warranties extend to the Original End-User ("Y ou[r]").
デバイスToshiba IK-WB01Aの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba IK-WB01Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba IK-WB01Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba IK-WB01Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba IK-WB01Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba IK-WB01Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba IK-WB01Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba IK-WB01Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba IK-WB01Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
