Tote VisionメーカーLCD-4200VTの使用説明書/サービス説明書
ページ先へ移動 of 38
TOTEVISION SERVICE CENTER 1319 Dexter A venue N.#020,Seattle,W a98109 TELL: (206) 623-6000 FA X: (206) 623-6609 LCD-2300VT LCD-2700VT LCD-3018VT LCD-3200VT LCD-4000VT LCD-4200VT L CD COL OR TV P/N:7042301301 V1.
CONTENT SAFETY & PRECAUTIONS................................................. ACCESSORIES...................................................................... TO CUSTOMERS.................................................................. OPERATION SAFETY.
Caution : To avoid fire and electric shocks, do not expose this product under damp or humid condition and make sure the plug i s fully plugged in at all time. Warning:Never open the housing of the LCD display. When the housing is opened, there is a danger of injury from electric shock.
Thank you for purchasing this product. Please read through the instructions and follow the steps in order to achieve the maximum reliability. Please keep this manual handy and close to your LCD display after reading. ◎ Manual Guide -- Please read through user's manual before operating this product.
◎ Do not insert any objects through the slots and openings of the LCD display.This may lead to an electrical short-circuit or even cause fire and results in damages to your LCD display ◎ Repair--Please unplug the power cord and contact distributors or qualified repair personnels if any of the following situations have happened.
◎ Wall Mounting--Please use correct wall mount and follow instructions when installing the display onto the wall. ◎ Cleaning--Unplug power cord beforehand.Please use dry and soft sponge to clean the screen surface.Do not use diluted acid. ◎ Humidity--Keep this product away from moisture or high humidity area.
◎ Away from heat sources--Keep this product away from heat sources such as direct exposure to sunlight, heater and stove, etc.This would avoid structure distortion or machine break down.
8 8 8 8 8 8 8 8 8 8 8 8 ACCESSORIES User Menu(*1) Remote Control(*1) AAA Batteries(*2) VGA Cable(*1) Power Cable(*1) 6.
FUNCTIONS Color Adjustment:Users are able to adjust their custom color setup. Auto-Adjustment:It helps users to adjust the display into appropriate setup. Contrast/Brightness:Users are able to adjust their custom setup. Display Frequencies:Users can use this function to check current horizontal frequency,vertical frequency, phase and resolution.
23 "LCD-2300VT 27"LCD-2700VT 30"LCD-3018VT Dimensions 8 587.16 499 269.48 90 987.2 269.48 87.9 587.1 412.8 766.2 240 80.5 720 474.95 412.
Control Buttons(23".27".30") LCD-2300VT,LCD-2700VT,LCD-3018VT RGB 訊號接頭、 Audio in( 電腦聲音輸入源 ) 89.9 (mm) 頻道 音量 訊號源 目錄 電源 Dimensions Power Vol .
產品尺寸規格 產品尺寸規格 PRODUCT SPECIFICATIONS 974mm 688mm 254mm 40-inch.16:9 40 1280x768 6 W + 6 W 600 : 1 14/8 ms 50,000 hours 1026mm 32-inch.16:9 1366x768 551mm 800 : 1 240mm AC 100-240V ,50/60 Hz 10W + 10W 766mm 545mm 240mm 987mm 240mm 27-inch.
FEATURES Power Saving : Save more than 40 % power compared with CRT TV No Radiation : No radiation wave from screen. No Flaring Picture : No flaring picture which may hurt users' eyes Excel.
MULTI-MEDIA BOX Make sure multi-media box has been installed correctly. Please connect antenna cable to Multi-media box's tuner head 〈 ANT 〉 (Refer to figure 1 on page 12) Please do not install antenna in raining or thundering condition PRODUCT INSTALLATION 〈 WITH MULTI-MEDIA BOX 〉 1.
Please switch off PC and TV. Connect VGA cable to display's D-Sub connector, and connect the other head of cable to PC VGA Output You can use this display to play with a Video player, Video Camera, DVD Player, and TV Game consoles etc. Please connect to Y.
SOURCE INPUT CONNECTORS Multi-media box INPUT1 INPUT2 3 Connectors Description 1 2 AV.S-Video In Input 1 、 Input 2 Video Input is using Video Jack( Yellow RCA Jack )or S-Video Jack.
1 . Press POWER button from key pad (or remote control),the red light will turn green.This means the TV has been switched on. The picture will takes about 3 seconds to show on the screen.
Source: Select source input (2) (3) (4) (5) (6) Menu: Select from PICTURE PARAMETERS/AUDIO SETTING/PICTURE IN PICTURE/PARENTAL CONTROLS/GENERAL SETTINGS.Use(+)(-)to select desired program and press ENTER to proceed. Use and to select function that need to be adjusted.
REMOTE CONTROL PRECAUTION & USAGE Remote distance will be shorter as the signal receiver is facing a strong light. Remove batteries from remote control if it not in use for a long time Remote control should point directly to the TV signal receiver (10)Mute: Switch On/Off sound off function (11)Sleep: Set timer t o 30/60/120 min.
PC (RGB) MODE IMPORTANT: 1.If PC picture interferences appeared while RGB and antenna are connecting to the display at the same time. This is possibly caused by PC and display both are using different number of plugging heads,such as 2 heads and 3 heads.
A : By using Key Pad B : Or Remote Control 1.Channel Selection 2.Direct Channel Selection Select favorite channels directly by pressing channel numbers. For example, Ch45. Press 4 and followed by 5 Press Ch or button to search channels 5 5.Press POWER button to stop auto-scan process 4.
AUDIO SETTINGS 3.Press to enter Audio Settings menu.Use Buttons to select (Bass/Treble/Balance/MTS/Mute) 1.Press Vol button, "-"for volume down and "+"for volume up. 2.Press MENU to display the main menu. Use Vol to select audio settings.
PICTURE PARAMETERS BRIGHTNESS BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP 50 1.Press MENU button to display the main menu 2.Press Enter button to select(PICTURE PARAMETERS) option 3.Select BRIGHTNESS and press to perform adjustment. FLESHTONE SHARPNESS CONTRAST BIRGHTNESS CONTRAST SATURATION HUE COLOR TEMP 50 FLESHTONE SHARPNESS 3 B 7 C 1.
PICTURE PARAMETERS SATURATION BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP 50 FLESHTONE HUE BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP 50 FLESHTONE SHARPNESS 1.Press MENU button to display the main menu 2.Press Enter button to select(PICTURE PARAMETERS) option 3.
PICTURE PARAMETERS FLESHTONE BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP FLESHTONE SHARPNESS SHARPNESS BRIGHTNESS CONTRAST SATURATION HUE COLOR TEMP 50 FLESHTONE SHARPNESS 1.Press MENU button to display the main menu 2.Press Enter button to select(PICTURE PARAMETERS) option 3.
AUTO CLOCK PHASE POSITION AUTO COLOR YES NO AUTO CLOCK PHASE POSITION AUTO COLOR 50 PC PARAMETERS AUTO CLOCK 1.Press MENU button to display the main menu 2.Press button to select(PC PARAMETERS) option 3.Press Enter button to select AUTO 4.Press Enter again and use to select (YES / NO) 3 B 7 C 4 E 4 D 1.
AUTO CLOCK PHASE POSITION AUTO COLOR AUTO CLOCK PHASE POSITION AUTO COLOR 50 PHASE POSITION PC PARAMETERS 1.Press MENU button to display the main menu 2.Press button to select(PC PARAMETERS) option 3.Press Enter button to select PHASE 4.Press to adjust 3 B 7 C 4 E 4 D 1.
AUTO CLOCK PHASE POSITION AUTO COLOR YES NO AUTO COLOR AUDIO SETTINGS BASS TREBLE BALANCE MTS MUTE MONO STEREO SAP AUTO CLOCK PHASE POSITION AUTO COLOR YES NO AUTO COLOR AUDIO SETTINGS BASS TREBLE BALANCE MTS MUTE MONO STEREO SAP PC PARAMETERS 1.Press MENU button to display the main menu 2.
PICTURE-IN-PICTURE PIP SIZE OFF SMALL PBP PIP POSITION PIP SOURCE LARGE 1.Press MENU button to display the main menu 2.Press button to select(PICTURE-IN- PICTURE) option 3.
PIP POSITION PIP SIZE PIP SOURCE PIP SOURCE DVI VGA S-VIDEO1 YCbCr TV HDTV PICTURE-IN-PICTURE 1. When the main screen is display under the VGA or HDTV mode either (DVI-S-video1/S-video2/AV1/AV2/YCbCr/TV)is selectable for sub-screen display. 2.(VGA and HDTV source are not viewable at the same time) 3.
" " " " Remark: Represent a playable source Represent a non-playable source Picture source setup PICTURE SOURCE SETUP VGA DVI Av1 YCbCr TV HDTV Sv1 VGA DVI Sv1 Av1 YCbCr TV HDTV Ma.
SYSTEM CH EDIT ANTENNA CABLE SYSTEM CH EDIT AUTO ADD DELETE CHANNELS AUTO-SCAN ANTENNA AND CABLE TV SELECTION CHANNEL SETTINGS SYSTEM CH EDIT ANTENNA CABLE SYSTEM CH EDIT AUTO ADD DELETE CHANNELS AUTO.
PARENTAL CONTROLS LOCK MENU MPAA RATING TV PG RATING CODE CHANGE Please Enter the Password: GENERAL SETTINGS OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE 10 SEC 30 SEC 1 MI.
GENERAL SETTINGS LANGUAGE 中文 ENGLISH OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE SLEEP TIMER 60 MIN OFF OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DE.
GENERAL SETTINGS I/P INFO RESOLUTION SOURCE OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE RESET YES OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE NO H SYNC V SYNC AV 720x240 15KHZ 59KHZ 1.Press MENU button to display the main menu 2.
GENERAL SETTINGS OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE OSD TIMEOUT LANGUAGE SLEEP TIMER I/P INFO RESET TRANSPARENCY DEINTERLACE 50 MADI MOTION LOW MEDUUM HIGH TRANSP.
GENERAL SETTINGS DEINTERLACE 1.MADI(Motion Adaptire De-interlacing) Video processing with this de-interlacing,recommend in TV,AV and S-video mode. 2.Motion: Video processing in motion picture. Low: Exhibits very little fickering. Medium: Between low and high.
ToteVision warrants to the original purchaser that this product is free from defects in workmanship and material under normal use and conditions for a period of 1 year from the date of original purchase,subject to the limitations below.
デバイスTote Vision LCD-4200VTの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Tote Vision LCD-4200VTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTote Vision LCD-4200VTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tote Vision LCD-4200VTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tote Vision LCD-4200VTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tote Vision LCD-4200VTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTote Vision LCD-4200VTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tote Vision LCD-4200VTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTote Vision LCD-4200VTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。