Transition NetworksメーカーN-FX-MT-01の使用説明書/サービス説明書
ページ先へ移動 of 16
Ethernet ™ 10/100BASE-SX, 100BASE-FX PCI Network Interface Cards N-FX-ST -01, N-FX-SC-01, N-FX-MT -01, N-SX-ST -01, N-SX-SC-01, N-SX-MT -01, ND-FX-ST -01, ND-FX-SC-01, ND-FX-MT -01, ND-SX-ST -01, ND-SX-SC-01, ND-SX-MT -01 USER’S GUIDE Adapter Hardware Installation .
ADAPTER HARDW ARE INST ALLA TION Follow Instructions outlined in the indicated personal computer user ’ s guide for installing PCI Bus add- in cards into a PCI slot that supports bus mastering. CAUTION: Heed the warnings in the PC user ‘s guide in regard to proper protection against static discharge.
PCI NETWORK INTERF ACE CARDS TRANSITION Networks Fiber -Optic PCI Network Interface Cards (Adapters) are 32-bit bus-mastering PCI cards that support both half-duplex and full-duplex operation and that comply with PCI Specifications, revision 2.1 and 2.
ADAPTER SOFTW ARE INST ALLA TION NOTE TRANSITION Networks Fiber -Optic PCI Network Interface Cards (Adapters) are shipped with one (1) CD driver disk containing software drivers for various network operating systems, diagnostic utilities, and electronic format documentation.
21. When the system comes up open Netowok Neighborhood by right clicking 22. Click on " Properties" 23. Highlight "T ransition LANart …." And , Click on "Properties" 24. Click on Advanced 25. Chose the properties as required by Network Administrator 26.
MICROSOFT WINDOWS 95 - SOFTW ARE UPGRADE 1. Power up the computer , and start W indows 95. 2. The following instruction is to update the driver for LANart network card. 3. Update the driver for T ransition Networks / LANart (EF A020X) - open the control panel by clicking "Start," then "Settings," then "Control Panel.
MICROSOFT WINDOWS 98 - NEW INST ALLA TION 1. Copy the appropriate device install script For NDIS3 MAC driver type copy A:Win98Nids3MacNetamd.inf C:WindowsInf For NDIS4 MINIPOR T driver type copy A:Win98Nids4MiniNetamd.inf C:WindowsInf 2. Shutdown W indows 98 and power -off the machine.
19. Double Click "system" 20. Click "Device Manager" 21. Double Click "Network Adapter" 22. Highlight " …." And , Click on "Properties" 23. Click on Advance 24. Chose the properties as required by the Network Administrator 25.
MICROSOFT WINDOWS 98 - SOFTW ARE UPGRADE 1. Power up the computer and start W indows 98. 2. Update the driver for the PCI card - open the control panel by clicking "Start," then "Settings," then "Control Panel." 3. Double Click "system" 4.
MICROSOFT WINDOWS NT 4.0 - NEW INST ALLA TION 1. Install the T ransiton (EF A020X series) Adapter card in accordance with your personal computer user's manual.
MICROSOFT WINDOWS NT 4.0 - SOFTW ARE UPGRADE 1. Start W indows NT , and open the control panel by clicking "Start," then "Settings," then "Control Panel." 2. Double Click on "Network." 3. Click on the Adapters tab.
NOVELL NETW ARE 4.X / 5.X - NEW INST ALLA TION 1. Power off the machine. 2. Install the T ransiton / LANart (EF A020X ) Adapter card in accordance with your personal computer user's manual. Again, follow all handling procedures to avoid electro-static discharges.
NOVELL NETW ARE 4.X/ 5.X - SOFTW ARE UPGRADE/ADDING NETWORK CARD TO AN EXISTING SYSTEM. 1. Shutdown Netware Server and power -off the machine. 2. Install the T ransiton / LANart (EF A020X series) Adapter card in accordance with your personal computer user's manual.
MICROSOFT WINDOWS NT 4.0 - PERMANET SER VER The PermaNet Server feature allows users to configure a pair of LANart PCI device based NIC as primary and secondary , and provides the ability to automatically fail-over from primary adapter to the secondary adapter should the link status of the primary go down 1.
INST ALLING SUNSOFT SOLARIS DRIVER (X86 ENVIRONMENT) 1. Login as root 2. Copy from the media /solaris/pnt-solaris.pkg to /var/spool/pkg 3. At the prompt. T ype, Pkgadd – d pnt-solaris.pkg and follow the instruction on the screen 4. W ait for the process to complete 5.
COMPLIANCE INFORMA TION CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
デバイスTransition Networks N-FX-MT-01の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Transition Networks N-FX-MT-01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTransition Networks N-FX-MT-01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Transition Networks N-FX-MT-01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Transition Networks N-FX-MT-01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Transition Networks N-FX-MT-01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTransition Networks N-FX-MT-01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Transition Networks N-FX-MT-01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTransition Networks N-FX-MT-01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。