Transition NetworksメーカーSIBTF10XX-1XX-MSの使用説明書/サービス説明書
ページ先へ移動 of 15
User ’ s Guide SIBTF10xx-1xx-MR & SIBTF10xx-1xx-MS Substation-Rated Industrial Ethernet Switch • 10/100Base-TX to 100Base-FX • Single or Redundant Wide Input Power Supply The SIBTF10xx-1xx-M.
2 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Available SIBTF10xx-140-MR and MS models* *MR = Redundant power-supply terminal blocks, MS = Single power-supply terminal block. Note: The cable distances listed are maximum distances typically.
4 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation F eatures • The SIBTF10xx-140-MR industrial switch includes four (4) RJ-45, twisted-pair copper ports and one (1) 100 Mb fiber optic port.
6 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Figure 3: SIBTF10xx-110-MR Front Panel Installation -- continued F eatures -- continued • The SIBTF10xx-110-MS industrial switch includes one (1) RJ-45, twisted-pair copper port and one (1) 100 Mb fiber optic port.
8 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued DIP switc h settings 1. Port 1 copper Auto-Negotiation: UP (Enabled) - Advertises switch speed and mode capabilities to the network: • 100Mb/s full-duplex • 100Mb/s half-duplex, • 10Mb/s full-duplex • 10Mb/s half-duplex.
10 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued Note: DO NOT use bare (exposed) or un-lugged power-source wires to connect to the industrial switch.
Installation -- continued Internal rela y connections The internal relay can activate an external fault indicator. The fault indicator connects to the relay contacts on the front panel. An example would be a fault circuit connected to a warning light located in a control room.
14 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued Installing fiber cable To install a fiber cable, view Figure 10, and then do the following: 1. Locate or build 100Base-FX fiber cable with male, two-stranded TX to RX connectors installed at both ends.
16 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Oper ation -- continued C opper/fiber status LEDs -- continued Copper LEDs The function of the copper port LEDs (1, 2, 3, and 4) are as follows: 100MB ON The copper port has established a link at 100 MB/s.
18 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Oper ation -- continued Product features -- continued Auto-Negotiation The Auto-Negotiation feature allows the SIBTF10xx-1xx industrial switch to configure itself to achieve the best possible mode of operation over a link automatically.
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 21 C able Specifications -- continued SIBTF1013-1xx-Mx 1300 nm multimode Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm Fiber Optic Receiver Sensitivity: min: -30.
22 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model SIBTF10xx-1xx-Mx or equivalent. Standards: IEEE 802.3™ 2000, IEEE 802.3x™ Data Rate: 10 Mb/s, 100 Mb/s (copper) , 100 Mb/s (fiber) Dimensions: Models 130- & 140-Mx (W x H x D) 4.
24 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Standard Description Compliance Level Remarks IEEE1613, Power Substation Testing -- Continued IEEE1613, Clause 7.
26 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Contact Us Technical support Technical support is available 24 hours a day. US and Canada: 1-800-260-1312 International: 00-1-952-941-7600 Transition now Chat live via the Web with Transition Networks Technical Support.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.
デバイスTransition Networks SIBTF10XX-1XX-MSの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Transition Networks SIBTF10XX-1XX-MSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTransition Networks SIBTF10XX-1XX-MSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Transition Networks SIBTF10XX-1XX-MSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Transition Networks SIBTF10XX-1XX-MSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Transition Networks SIBTF10XX-1XX-MSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTransition Networks SIBTF10XX-1XX-MSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Transition Networks SIBTF10XX-1XX-MSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTransition Networks SIBTF10XX-1XX-MSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。