TRENDnetメーカーTVIP612Pの使用説明書/サービス説明書
ページ先へ移動 of 102
.
ii CONTENTS ABOUT THIS USER’S GUIDE ..................................... .................................... ................................. 1 INTRODUCTION ................................ ............................
iii Video Audi o ..................... ................................................. .................................................. .................... 41 Video and Audio .............. .................. .........
iv A. Frequently Asked Que stions ......................................... .................................................. .................... 80 B. PING your IP Address ... ............................
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 1 About This User’s Guide This User Guide provides instructions on how to install the TV-IP612P/W Wireless Network camera and use it for camera monitoring applications. Camera monitor applications are accessible through an Ethernet or 802.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 2 1 Introduction Thank you for purchasing the TV-IP 612P/TV-IP 612WN Pan/Tilt/Zoom (Wireless) Int e rnet Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet connection.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 3 allows the Administrator to manage and control the Camera from anywhere in the World at anytime.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 4 Syst em R equi rem ent s Networking • Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Etherne t • Wireless Local Area Network: IEEE 802.11b/g/n Wireless LAN (TV-IP612WN only) Computer • CPU: P4 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 5 Default Settings Use the default settings to access the web- based management software and live video display. Default configuration settings Username This is the Username you will be prompted to enter when you access the TV- IP612P/WN configuration screens using a Web browser.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 6 Camera Hardware Components This section provides information about the Camera’s hardware components: Front Panel Components Front panel of TV-IP612P/W LED Indicators LNK This LED indicator lights steady oran ge when a valid Etherne t link is established.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 7 Rear Panel Components The power connection to the camera when fitted with the Infrared lens is split between the camera body and lens using the power connection adapter c able attached to the infrared lens.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 8 MIC Used this jack to connect and record audio from an external microphone. Reset Butt on Use to reset device to factory default settings including IP addr ess and administrator user name and password.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 9 2 Installing the Camera The camera is intended for indoor use. The camera, the power adapter and power source should be protected from water and moisture, excessive heat, direct sunlight and cold.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 10 Connect Ethernet Cable To connect the camera to your network, connect a Category 5 or bette r Ethernet cable to the network cable connector located on the c amera’s left side panel, and then attach it to the network.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 11 Reset Camera A manual reset can be conducted by following the procedure below. The reset button is located on the rear panel of the camera. To reset the system settings to factory defaults, please follow these steps: 1.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 12 3 Security To ensure the highest level of security and prevent unauthorized usage of the Camera, the Administrator account has exclusiv e access to the camera’s configuration settings. The Administrator account can create up to 20 users.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 13 4 Application The TV-IP612P / TV-IP612WN camera can be applied in a wide range of applicati ons, including: • Monitoring of local and remote places and objects, such as construction sites, hospitals, amusement parks, schools and day-care centers by using a web browser.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 14 5 Using the Utility This chapter describes the software utilities for the IP Camera, including how to set up your Camera with the utility. The SetupWizard has a user-friendly interface that allows you to setup the Camera easily.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 15 2. The next window asks you whether you want to accept the License Agreement or not. • If you agree with the Lic ensing Agreement, click the I Agree radio button and the Next > button.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 16 5. The software will start to install. The following window appears, showing the progress of the installation: 6.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 17 Launching the SetupWizard To launch the SetupWizard, click the SetupWizard icon on your desktop or go to Start > Prog rams > TRENDnet > SetupWizard > SetupWizard to start the appilcation.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 18 SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on you r network: Click on the camera you want to configure. Click Next to continue.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 19 SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configuring the camera settings: Type a User ID in the ID field. Type a password for the User in the Password field.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 20 SetupWizard- Other Settings The screen below allows you to set the camera name and the camera’s time settings. Type a name to help you identify the camera in the Camera Name field. Set the camera date and time from the Camera Time drop-down menus.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 21 SetupWizard- Change Password The following screen allows you to change the default admi n password: Carry out the following if you want to .
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 22 SetupWizard- Select a Connection Option The following window allows you to specify the connection method used by your camera n etwork. Click the radio button of the network environment your camera is connected to.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 23 SetupWizard – Select a Connection Option - PPPoE If your connection method is PPPoE, click the PPPoE radio button and click Next : The following window appears: Type the User Name used to connect to your PPPoE connection in the User Name field.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 24 SetupWizard- Select a Connection Option- DH CP If your connection method is DHCP, click the DHCP rad io button and click Next :.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 25 SetupWizard- Select a Connection Option- Fix e d IP If your connection method is Fixed IP, click the Fixed IP radio button: The following w.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 26 SetupWizard- Setup Wirel ess (For TV-IP612WN only) After choosing your connection method, the following window appears: Choose if you want to connect to your camera using the wireless connection or not by clicking the appropriate radi o button.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 27 SetupWizard- Setup Wirel ess (For TV-IP612WN only) If you selected the option to use a wireless connection to connect to your camera the following window appears: Choose the Access Point you want to connect the camera to from the Available AP drop- down menu.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 28 SetupWizard- Setting Up The Ca mera The following window appears, summarizing the network settings of your camera: When you have finished setting up the Camera click the Next button. To make any changes to your Camera settings, click the Previous button.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 29 SetupWizard- Complete After the camera has restarted, the following window will appear: Click the hyper-link to connect to the camera web interface. If you want to setup an additional camera, click the Setup Another Camera button.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 30 6 Using the Camera Web Manager The camera is easy to use and manage. Use a normal web browser to access the camera’s live video display, as well as the configuration software.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 31 Login To access the web manager directly from a computer or on a network without a DHCP server running, use the default IP address of the camera in the browser address entry to access the web manager.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 32 Wizard The first menu to appear after clicking on Setup is the the automatic setup wizard. You can use this wizard to configure settings for your camera’s Name, LAN and Internet, DDNS and Time/Date.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 33 Step 1 Setup LAN Settings Select the DHCP Connection option if your wired or wireless connection wil l use a dynamically assigned IP address Select the Static IP Address option and then manual enter in the network settings your c amera will use.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 34 Step 3 Setup DDNS Settings To synchronize the public IP address of the Modem, when it has been modified, use the DDNS service settings. You must supply the Username and Password when utilizi ng the DDNS service.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 35 Step 5 Setup Time Zone Use this step to configure the Time and Date, the Time Zone and the Daylight savings configuration of the camera. Time Zone: Select the Time Zone for your camera in the drop-down list.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 36 System The system menu item configures the devices users, associated passwords, device name, OSD settings, and LED light control. Device Management Admin Password Settings : Use the fields to change the administrator password used to access the System Administration settings.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 37 Time and Date Time Configuration Time Zone: Select the Time Zone for your camera in the drop-down list. Enable Daylight Saving: Select this to enable Daylight Savings for the Time Zone you have chosen above.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 38 Network Use the menu selections in this section to configure the network settings for both wired and wireless LAN setups (TV-IP612WN only) of the camera. Network Setup DHCP Connect ion: Select this option to automatically configure the Camera IP settings from a DHCP server.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 39 Port Settings HTTP Port: Configure this with the HTTP Port to be used for vi ewing the camera over the internet. RTSP Port: Configure th is with the Real Time Streami ng Protocol port used by an RTSP client to view the camera from for example, a mobile or smart phone.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 40 Selecting a SSID from the Site Survey When you click on the Scan button in the Wireless menu a list of networks is available in the pull- down list immediately below. Selecting one of these items automatically populates the Wireless Mode , Channel , Authentication and Encryption fields.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 41 Video Audio Video and Audio Video Profile 1-4 Encode Type: Select one of H264 , JPEG , or MPEG4 encoding from the drop-down menu. Profile 4 is always set to MPEG4. Resolution : Select the size of the desired screen viewing resolution .
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 42 Audio Setup Enable Speak er: Check this box to enable the local exte rnal speaker on th e camera. Us ing the microphone on your comp uter allows you to sp eak to anyone near the came ra. Volume: Adjusts the volume o f the externa l speaker turned on above.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 43 Advance Image Settings Auto Gain Control: When the level of input luminance is too dark, setting the AGC to high will automatically increase the image brightness.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 44 Shutter Mode (Shutter-preferred) • Select Auto to have the camera shutter-speed be automatically set.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 45 Night mode: If the camera is used only in a low-light and dimly lit area then select this option to increase the camera sensitivity by operating it in Black and White mode.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 46 Recording Options Resolution: Select the profile from the drop-down menu. Refer to the Audio an d Video section for more information on profiles. Record File Size: Select from 1 to 10 minutes i n the pull-down menu.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 47 Snapshot Enable Sna pshot: This option allows you to send an snapsho t or still image from the camera attached to an E-mail or via an FTP serv er. Trigger Event: These 2 options determine when to transfer an image via email or ftp.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 48 FTP Settings FTP Server: Check th is option to se nd the image captured to a FTP serv er. User Name: The acc ount user name assigne d and used for accessing the FTP server. Passwor d: The passwor d used for the account u sername configu red above.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 49 Patrol Selection: This box shows the available Preset Locations saved which can be moved t o the Selected Locations box below by highlighting them and clicki ng on the Select button.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 50 Trigger Enable D/O Signal: Checking this box turns on the Digital Output to trigger external equipment such as alarm lights or sirens. Trigger Event Motion Detection :Check ing the motion detection box causes the D/O pins to activate connected alarm devices upon motion being detected.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 51 Motion Detection Live Video Enable Video Motion: The camera can be setup to record whene ver motion is detected in the camera’s field of view and programmable predefi ned areas. Check this box to the motion detection function.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 52 Tools Backup and Restore Save to Local Hard Drive: To save the configuration to a file clock on the Save Configuration button.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 53 Device Info Device Info Detailed in formation ab out your camera ’ system and networ k setting s can be foun d on this page Log Logs recorded by the camera can be viewed on this page.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 54 Viewing Video The TV-IP612P /TV-IP612WN camera allows you to view video images using in your web browser.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 55 Controlling the Camera You can control the Camera’s viewing angle using the control buttons on the left-hand side of the viewing window.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 56 1. Video 1 - Click this button to view the image using Video Profile 1 setti ngs. Go to the Setup section Video/Audio – Video and Audio to change the Profile settings. 2. Video 2 - Click this button to view the image using Video Profile 2 setti ngs.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 57 7 IPView Pro 2.0 This section describes the how to setup a camera using the IPView Pro 2.0 ca mera monitoring software. To install IPView Pro 2.0 on a system runni ng Windows, launch the IPView Pro 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 58 Add a camera for monitoring The Add camera menu is presented the first time the IPView Pro 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 59 If the camera does not appea r listed , click th e Input the location of camera tab above the l ist to view a new menu.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 60 IPView Pro 2.0 User Interface Below is a general description of the user i nterface. NO. Item Description 1 Live video display area Display area for single or mult iple cameras o f live video.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 61 6 Live video display controls See below for detailed information. 7 Camera configuration menu See below for detailed information. 8 Camera status Use to quickly ass ess the stat us of operat ing cameras.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 62 Notice that when these functions are activated, the col or of the icon changes from white to yellow.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 63 Live video display controls Use the video display controls to change the view of the live video display. This is useful for multiple camera application. Click the arrows to manually cycle through the active camera’s live display s when using a si ngle camera di splay screen.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 64 Camera configuration with IPView Pro 2.0 Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel of the IPView Pro 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 65 2. Select the camera to ad d from the list, enter the administrator’s user name ( ID : ) and password, a preview of the live video display will appear . Click the OK, a dd this cam era button, a confirmation message informs when the camera is con nected and added to the IPView Pro 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 66 Schedule R ecording wi th IPView Pro 2.0 Use the Monitorng Settings menu to create schedules for recording and apply the schedules to any camera. Click the Monitoring Settings tab to view the Schedule Recording menu (the first menu viewed in the Camera Settings menu tab).
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 67 Create Schedule Templates To make a new schedule template, click the Edit Template button to view the Select schedule profiles dialog box. Use this new dialog box to create new schedules for recording.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 68 Setup Motion Detection and Digi tal Input with IPView Pro 2.0 The Camera Settings menus include Motion Det ection setup and Digital Input control. Each menu has the schedule option to apply a schedule for the action taken or always take the specified action.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 69 IPView Pro 2.0 Recording Options The Recording Options configured in the IPView Pro 2.0 help to conserv e and manage allowed memory storage (disk space) and for video file management. Recorded files can be limited by time elapsed or by size.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 70 IPView Pro 2.0 Miscellaneous O ptions The Other Options available for configuration incl ude Proxy server setup, email notification, scan interval and alert typ e settings.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 71 8 Playing Video File s on a Computer IPCamPlayer software is installed on the monito ring station or administrator’s system along with the IPView Pro 2.0 monitoring software. Use it to playback and manage recorded video from the cameras added to the IPView Pro 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 72 Load Saved Video Files Each camera has a file created automatically for storing video files. These files are normally located in the My Documents folder in Windows. The file folders are named according to the IP address and camera model.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 73 To view recorded video files in the IPCamPlayer, it is first necessary to locate and select the files to be viewed and add them to the list. Click the Search Files button i n the IPCamPlayer main interface and a new menu appears.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 74 ffdshow The ffdshow software is used for audio and video encoding and decoding, especially for MPEG-4 formats. It is free software used on Windows sy stems and enables the user to tweak media playback and select specific codecs and formats.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 75 3. The InstallShield Wizard will appear, click Next in the wel come screen. 4. Accept the default location (Windows Progr ams folder) on the system for placement or Browse to choose an alternative, Click Next to continue.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 76 5. Click to check the components that will be installed. For IPC amPlayer it is only necessary to use the default components already selected. Click Next to continue. 6. Accept the default destination folder (ffdshow) or Browse to choose an alternative, Click Next to continue.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 77 7. Click to check the additional tasks that will be installed. For IPCamPlayer it is only necessary to use the default formats al ready selected. Click Next to continue. 8. Click to check the video applications that use ffdshow.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 78 9. Click to check the audio applications that use ffdshow. For IPCamPlayer it is only necessary to use the default applications al ready selected. Click Next to continue. 10. Choose a speaker setup or choose Disabl e mixer if unsure.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 79 12. If desired, any of the three configuration ut ilities incl uded with the ffdshow installation can be launched by checking the appropriate box. Click Finish to complete the installation. NOTE : To download the lat est copy of ffdshow please check the ffdshow website http://ffdshow.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 80 9 Appendix A. Frequently Asked Questions Internet Camera Features Q: What is an Internet Camera? A: An Internet Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wirel ess transmission based on the IEEE 802.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 81 Internet Camera Installation Q: Can the Internet Camera be used outdoors? A: The Camera is not water-proof and it is not recomended to use it outdoors.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 82 B. PING your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accesible by sending a packet to the specific address and waiting for a reply.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 83 4. Type ping x.x.x.x , where x.x.x.x is the IP address of the Camera, as shown below: Reply messages indicate that there is another device on the nework, as indicated in the above window.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 84 C. Troubleshooting Q: I cannot access the Camera from a web browser? A1: The possible cause might by that the IP addr ess of the Camera is already being used by another device. To c orrect the possible pr oblem, you need to disconnect the Camera from the network first.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 85 A2.2: Click the Network Connections icon as shown below:.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 86 A2.3: Double-click the network adaptor that is connected to your Camera: Select TCP/IP from the “Network“ dial og box and from the TCP/.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 87 Click the Properities button. Double-click the Internet Protocol (TCP/IP) item and check that the first 3 bytes of your computer’s IP address correspond with the first 3 bytes of the Camera’s.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 88 A3: The wireless connection might be faulty. If your Camera is operating in Ad-Hoc mod e make sure the Camera wireless channel and SSID are set to match the PC/Notebook and the Camera must match with the Access Point’s SSID.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 89 D. Time Zone Table Time Zo ne Location/Description (GMT - 12:00) Enj wetok , Kwaj a lei n (GMT - 11:00) Midway Island , Samoa (GMT - 10:00).
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 90 Time Zo ne Location/Description (GMT + 01:00) Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT + 01:00) Sarajevo, Skop je, Sofija, Wa rsaw.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 91 Time Zo ne Location/Description (GMT + 09:00) Seou l (GMT + 09:00) Yakut sk (GMT + 09:30) Adelaide (GMT + 09:30) Darwin (GMT + 10:00) Brisb.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 92 E.Technical Specifications Camera General Sensor: 1/4” CCD Sensor Focal Length: f(wide) 3.8mm to f(tele) 38.0mm F/No: F(wide)=1.8 , F(tele) = 2.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 93 GPIO Input: 1 set Output: 1 set Micro SD slot Micro Secure Digital card (up to 16 G) Hardware Network IEEE 802.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 94 Modulation DQPSK, DBPSK, DSSS and CCK OFDM: BPSK, QPSK, 16QAM, 64QA M Antenna 2 x detachable 2dB i dipole a ntennas (Reverse ‐ SMA connector) Date Rate 802.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 95 Dynamic DNS Yes Time Synchronize with NTP server or set time / date manuall y .
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 96 Limited Warranty TRENDnet warrants its pro ducts against defects in material an d workmansh.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 97 TRENDNET SHA LL NOT BE LIABLE UNDER THIS WARRA NTY IF ITS TESTING AND EXAMINATION DISCL.
TV -IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camer a 98.
デバイスTRENDnet TVIP612Pの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
TRENDnet TVIP612Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTRENDnet TVIP612Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。TRENDnet TVIP612Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。TRENDnet TVIP612Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
TRENDnet TVIP612Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTRENDnet TVIP612Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、TRENDnet TVIP612Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTRENDnet TVIP612Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。