Bekoメーカー25"の使用説明書/サービス説明書
ページ先へ移動 of 26
COLOUR TELEVISIONS Operating Instructions NICAM STEREO 24”, 25”, 26”, 28”, 29”, 32”, 33”.
1 List of contents Special featur es Safety instructions Getting started Aerial connection Switching on Battery fitting Contr ol unit Front and rear panel External connections table Remote control Usi.
T elevision Thank you for buying this television which is designed to give you many years of satisfactory service. Y ou may already be familiar with using a television but do please take time to read these instructions.
3 Safety is Important Y our safety and the safety of others is important. Please, therefore, ensure you r ead the Safety instructions before you operate this television. Safety instructions Read all the safety instructions before first use of your TV .
Getting started Remove your T elevision carefully from the bo x. Y ou may wish to Y ou can use an outdoor or indoor aerial. Ho wever , if you use an indoor aerial the quality of the reception may be reduced and adjustment of the aerial may be required when changing programs.
Contr ol Unit Front Panel Program Down/Up button V olume Down/Up button. General Program ON/OFF switch Stand by (Depends on model) Stand by indicator External Connections: (Front or side) Right audio .
6 External connections table STD OPT : Standart : Optional Please note: The Audio/V ideo RCA, S-V ideo and Headphone socket can be placed on the front panel or on the right-hand side of the cabinet depending to the model of your TV . Remote control 1 2 3 4 7 AV 5 8 0 6 9 -/-- O K/Z TV/TX MENU PP P.
Using the TV TV contr ols Programme selection Press the Program up or Pr ogram down buttons on the TV or remote control or press a Numeric button to select a programme. T o select a programme whose number is greater than 9 using the numeric buttons, press the -/-- button first and then press the two Numeric buttons.
8 In the Setup menu select PROG NO and change to P1 using the Program down button to select it and the V olume up button to change it. Starting with Program 1, tune in the first channel as follows: Use the Program down button to select SEARCH. P ress the V olume up or V olume down button to start the tuning search.
9 T uning with channel numbers Enter the SETUP menu by pressing the blue button. Press the OK/Z button to enter the CHANNEL row . Use the OK/Z button to select “S” for cable channels and “C” for terrestrial broadcast. Use V olume up button to select the channel number buttons.
10 Pr ogram T able Once you have tuned in all the channels you want, you can change their programme number , if required, and name them. select PROGRAM T ABLE and press the OK/Z button or press directly the Y ellow button. PROGRAM 01 will be selected and the channel stored under PROGRAM 01 will be showing on the screen.
11 V olume Sets default volume using the V olume up and down buttons. T o save your settings, select ST ORE and press the OK/Z button. will be displayed.
12 Sound mode Y ou can select NORMAL, SP A TIAL or DOLBY VIR TUAL (optional)using the V olume up/down buttons or mix button. SP A TIAL sound is an ‘ expanded stereo ’. I t gives the impression that the two speakers in the TV are further apart than they really are.
13 In this menu are a series of preset equalizer settings for different types of sound output. There are five music settings - MUSIC, SPOR TS, CINEMA, SPEECH and USER mode. USER allows you to set your own sound output as follows: Use the Program down button to select USER.
14 Select BRIGHTNESS, CONTRAST , COLOUR and SHARPNESS using the Program up/down buttons. Change the settings with the V olume up/down buttons. T o save your settings, select ST ORE and press the OK/Z button. STORED will be displayed. Press the Menu button to go back to the previous menu.
15 Picture format This allows you to select the picture size on corresponding to the scren type widescreen of your TV : A vaible formats for widesereen TV sets are 16:9, 4:3, zoom, Letterbox, Subtitle and Panaroma. A vaible formats of 4:3 TV sets are 4:3 and 16:9.
16 DOUBLE WINDOW If you press the PA P button the double window function will be displayed by putting the PIP window on the half of the main picture. Pr ogramme scan This function enables you to searc.
17 T eletext is an information system that displays text on your TV screen. U sing the teletext control buttons you can view pages of information that are listed in the teletext index. No on screen display is available in text mode. The contrast, brightness and colour cannot be changed but the volume control is still available.
18 Page hold If the page of text you have selected contains sub pages, these sub pages will automatically be displayed in order with a delay to allow you to read the page. T o stop the move to the next sub page press the Stop button. STOP will appear in the top left hand corner .
19 Connecting e xternal equipment Headphones (optional) The headphones must have an impedance of between 8 and 32 ohms and have a 3.5 mm stereo jack plug.
20 If you have an S-V ideo player you can connect it to SCAR T socket 2 via an adaptor from scart to S-V ideo/RCA audio (not supplied). S-V ideo Player Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug the other end into the aerial socket of the TV .
21 Connecting a DVD player V ia SCART Make sure the TV and DVD player ar e both switched off. Plug one end of the SCAR T lead (not supplied) into the back of the DVD player and the other end into one of the SCAR T sockets on the back of the TV . S witch on the DVD and the TV .
22 Connecting a decoder V ia SCART Make sur e the TV and decoder are both switched off. Plug one end of the SCAR T lead (not supplied) into the back of the decoder and the other end into the SCAR T1 on the back of the TV . S witch on the decoder and the TV .
23 Connecting TV with video and satellite/digital r eceiver Connecting TV with camcorder Aerial in Aerial out TV Scart socket V ideo Scart socket Aerial in Aerial out Scart socket Aerial socket Scart .
24 Help and service tips The TV does not work Make sure it is plugged into the mains supply and switched on. No sound • Is the sound muted? Press the Mute button.
25 SF PF 16:9 4:3 Please note: : Superflat picture tube : Pureflat picture tube : W idescreen TV : Conventional TV Using a subwoofer causes 20 W extra power consumption and supplies maximum 20 W extra sound output. General technical specifications Power Supply A C: .
デバイスBeko 25"の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Beko 25"をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBeko 25"の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Beko 25"の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Beko 25"で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Beko 25"を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBeko 25"の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Beko 25"に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBeko 25"デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
