Bekoメーカー26WLZ530HIDの使用説明書/サービス説明書
ページ先へ移動 of 37
INTEGR A TED DIGIT AL HD READ Y COL OUR TELEVISIONS Operating Instructions 26WLZ530HID.
TABLE OF CONTENTS 1 1-Important Information .......................................................................... 1 1.1-Cleaning the screen and cabinet... ..................................................................... 1 1.2-Disposing of your TV at the end of service life.
1 LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth.
2 1.5-Changing the plug The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriate wiring information below for your particular cable.
3 2 Features of your new television We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, we would like you to read this entire manual carefully before you use your product and keep it for future reference.
4 3 Important Safety Instructions This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV.
5 10) Never operate your TV close to water. Operating your TV, for example, near a bathtub, washbasin, kitchen washbasin, washing basin, wet basement and swimming pool can cause fire or electric shock. • Do not allow your TV to get wet. Never pour any liquids onto the TV.
6 18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning.
7 4 Start Remove your television carefully from its box. You can keep the packaging of your television to use in future. Contents of the box Power cable Remote control 2 batteries Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device.
8 5 Your new television 5.1-TV Control Panel or or Program Down/Up button or or Volume Level Down/Up button Menu button/Source selection button or or or or Power/Standby button or or or Stand by indicator Bright light: TV is in Stand-by Dimmed light: TV is On No light: Power Cable is not connected.
9 5.3-Remote Control Standby Temporary off button AV Source Menu button Temporary sound mute button 16:9 Picture format selection button Picture and Teletext (PAT) button Zoom Zoom mode selection butt.
10 6 Performing the initial power-on settings 6.1-TV controls 6.1.1-Temporary on/off (STAND-BY) When you press the red STANDBY button located on your remote control while your television is switched on, the sound and the picture will go off. In the stand-by mode, the power indicator of your television will glow brighter.
11 6.2-Turning on your television for the first time and tuning Installation Guide menu will be displayed on the screen when you turn on your television for the first time.
12 6.3.2-Manual tuning of digital channels and storing in the memory Press the MENU button on your remote control. Select CHANNEL SETUP by pressing the Right/Left movement button and confirm your selection with OK button.
13 Analogue Manual Tuning System I Channel C 4 Fine tuning +00 Search Programme no 1 Skip No Frequency Select Save Back Exit 62.25 Mhz 6.4.2-Manual tuning of analogue channels and storing in the memory 6.
14 Important Note: Not all broadcasting enterprises supply a detailed TV guide. Most of the broadcasting enterprises provide daily program information, but they do not give detailed explanations. Some broadcasting enterprises, on the other hand, do not give any program information at all.
15 created. To do this, press the FAV button on your remote control. Favourite List menu will be displayed. Favourite List ALL CHANNELS FAV1 FAV2 FAV3 FAV4 6.6.6-Skippingastoredchannel In the event that you do not wish to see certain programs while navigating through the channels using the P+/P- buttons, then you can use this function.
16 6.6.8-Channel List If you press OK button when no menu is open, Channel List menu will be displayed on the screen. CHANNEL LİST Channel 1 Channel 2 Channel 3 Channel 4 Select Exit You can see all .
17 7 The settings on your new television 7.1-Performing the Sound settings You may perform Volume settings by using the V+ or V- buttons on your television or the VOL+/VOL- buttons on your remote control. You can perform other Sound settings by entering the Sound menu.
18 7.1.6-Headphone By connecting headphones to your television you can listen to the program sounds independently from your television. To turn up and down the headphone volume level, select Headphone tab from the Sound menu and adjust the volume level by using the Right/Left movement buttons.
19 7.2.5.1-DNR (Noise reduction) You may reduce interference and noise formed in the picture by using this feature. Select DNR tab with the Up/Down movement buttons to activate this feature and select one of the Off , Low , Normal , High or Auto options with Right/Left movement buttons.
20 7.2.6.3-14:9 This is a movie format. Note: Since the use of certain functions in order to change the picture sizes for collective projection or commercial purposes (modifying the height and width etc.) will be deemed an infringement of the picture’s copyright, legal proceedings can be carried out as required under relevant laws.
21 7.3.2-Off Time Select the Off Time tab by pressing the Up/ Down movement button in TIMER menu and confirm your selection with the Right movement button or OK button. In this menu, you can set the off time for your television with weekly or daily periods.
22 7.4.3- Country You can not access the Country option from the Options menu. The country selected during the initial use will automatically displayed in the menu. 7.4.4- Game Mode In the Options menu, you can set the Game Mode tab to On/Off by pressing the Right/ Left buttons.
23 to block from the Block Programme menu with Up/Down buttons and confirm with the GREEN button on your remote control. A lock symbol will appear next to the channel name. When a blocked channel is selected, the password screen will be displayed and the channel will not appear until the correct password is entered.
24 8 Teletext Being one of the most prominent services of broadcasting today, Teletext renders the TV more fruitful. Teletext means in short the transmission of various updated information along with the TV broadcast signal in the form of text and graphics.
25 8.7-Temporary TV Picture (UPDATE) This button allows you to switch to the television picture while the page you want is being searched in the teletext broadcast eliminating the need to wait during the search. You may switch to the television picture by pressing the UPDATE button while Teletext is searching for your desired page.
26 9 Side view of the TV 9.1-Headphone Connection The headphones must have impedance between 8 and 32 ohms and have a 3.5 mm stereo jack plug. Plug the headphone jack into the headphone socket of the TV.
27 9.3-Connecting external equipment via AV connection Side view of the TV CAMERA DECODER DVD SATELLITE RECEIVER GAME CONSOLE AV : To watch the picture of the broadcast device connected using the RCA (Phono) input, select AV option from the Source menu and press OK button.
28 Rear or side view of the TV DVD SATELLITE RECEIVER GAME CONSOLE HDMI: When a connection is made via HDMI socket, select the HDMI input through which you have made the connection from the Source menu and press the OK button. Your TV will switch to the selected source.
29 9.7.2-Switching to the PC mode For your LCD-TV to switch to the monitor (PC) mode, press the SOURCE button on your remote control. SOURCE menu will be displayed.
30 10 Help and tips Failure Possible cause Solution The television does not function Is the power cord connected to the mains supply? Check the power cord. Is the Power On/Off button on? Check if the On/Off button is on. Poor picture quality Is the antenna cable connected? Check the antenna cable.
31 SCREEN SIZE 26” Panel type 26”, 16:9 Active matrix TFT Sound output 2x7 W Power consumption 110 W Stand by power value <1 W SCART input Standard Audio/Video Phono input Standard S-Video sock.
32 12 MAIN UK TRANSMITTER STATIONS UHF CHANNELS STATIONS CT D Regional Main stations BBCI BBC2 ITV CH4 CH5 Map BBCI BBC2 ITV CH4 CH5 Map North West Caldbeck 30 34 28 32 56 12 Bluebell Hill 40 46 43 65.
33 13 Guarantee - Television Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • All repairs necessary as a result of faulty materials,defective components or manufacturing detect.
34 HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television.Your new television has been designed and manufactured to the highest quality stadards to give you many years of use. To get the best out of it,please take a few moments to read the instruction book.
V8K.80 1.
デバイスBeko 26WLZ530HIDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Beko 26WLZ530HIDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBeko 26WLZ530HIDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Beko 26WLZ530HIDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Beko 26WLZ530HIDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Beko 26WLZ530HIDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBeko 26WLZ530HIDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Beko 26WLZ530HIDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBeko 26WLZ530HIDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。