Bekoメーカー40WLU550FHIDの使用説明書/サービス説明書
ページ先へ移動 of 37
Operation Instructions 40WLU550FHID INTEGR A TED DIGIT AL FULL HD COL OUR TELEVISIONS.
TABLE OF CONTENTS 1 1-Important Information ............................................................... 1 1.1-Cleaning the screen and cabinet... ....................................................... 1 1.2-Disposing of your TV at the end of service life.
1 LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth.
2 1.5-Changing the plug The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriate wiring information below for your particular cable.
3 We would like this product, which has been manufactured in modern facilities in accordance with total quality principles, to offer you the best performance. Therefore, please read this entire manual carefully before you use your TV and keep it in a safe place for future reference.
4 3 This symbol is used to warn the user about the “dangerous voltage” contained inside the housing of the product that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV.
5 13) Make sure that the power cable is not stepped on and that there is no bending at the plug sections, plug heads and TV output point. 14) Use only the add-ons/accessories specified by the manufacturer. 15) Use only brackets or stands specified by the manufacturer or sold along with the product.
6 18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning.
7 Not 1: Your TV will switch to the STANDBY mode in five minutes if there is no broadcast signal from the aerial. Note 2: Your TV is equipped to operate with TV buttons in case your remote is broken or the batteries are exhausted. 3. To power on your television, press any numerical key or PR+ or PR- keys on the remote control.
8 5 5.1-TV Control Panel or Program Down/Up button or Volume Level Down/Up button or On-Off / Standby button or or Stand by indicator Bright light: TV is in Stand-by Dimmed light: TV is On No light: Power Cable is not connected. or Menu button / Source selection button 5.
9 5.3-Remote Control Stand-by mode On/Off button Temporary sound mute (Mute) button AV modes selection menu button Picture Format selection button PAT (Picture and Teletext) Mode ZOOM mode selection b.
10 6.1.4-Performing the Volume setting You can adjust the volume of your television by using the VOL+/VOL- buttons on your remote control. 6.1.7-Main Menu Press the MENU button.
11 Select the country by using Up/ Down, Left/Right movement buttons and press OK button to start the auto programming. Channel Search menu will be displayed and digital channels are scanned and stored in the memory. Select AUTO TUNING tab and confirm by pressing the OK button.
12 6.3.2-Manual tuning of channels and storing in the memory Press MENU button in digital mode and MAIN MENU will be displayed. Select SETUP tab with Down movement button and confirm with the OK button. SETUP menu will be displayed. Select MANUAL TUNING tab and confirm by pressing the OK button.
13 6.3.4.2-Creating favorite channels list You can create 6 favorite channel lists according to your personal preferences. To do this press the RED button when you are in Program table. Favorite Lists will be displayed. All TV channels can be seen on the Left hand side and favorite channels on the Right hand side.
14 You can select the channel by using the Up/Down movement buttons and navigate through the program data with Right movement button. To get further information about the program press INFO button and detailed information about the selected program will be displayed.
15 SETUP I S06 0 P13 SELECT BACK SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM COUNTRY SELECTION BELGIUM CZECH REP . DANMARK DEUTSCHLAND ELLADA ESP ANA FRANCE HUNGARY IRELAND IT ALIA NETHERLANDS NORGE ÖSTERREICH POLSKA PORTUGAL SCHWEIZ SUOMI SVERIGE TÜRKİYE U.
16 6.4.2.2-Ifyoudonotknowthe channel number Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. Setup menu will be displayed. Select the system in which you would like to make the search from the SYSTEM tab.
17 After setting is complete, press the EXIT button to exit the menu. 6.4.4.3-Skippingastoredchannel In the event that you do not wish to see certain programs while navigating through the channels using the PR+/PR- buttons, then you can use this function.
18 You can select the tab which you want to process with the Down movement button and set its level with Left/Right movement buttons. 7 Settings of Your New Television 7.1- Sound Menu Settings You may perform volume settings by using the VOL+ or VOL- buttons on your television or the VOL+/VOL- buttons on your remote control.
19 Using the Left/Right , Up/Down movement buttons, you may select either one of the preset MUSIC , SPORTS , CINEMA and SPEECH options which enhance the sound effect depending on the feature of the program you are watching or the USER option which you can adjust as you desire.
20 7.2.6-Backlight With this feature, you can adjust the intensity of light reflected to the LCD Panel. Select Backlight by pressing the Up/Down movement buttons and adjust the desired level by pressing the right/left movement buttons.
21 7.2.9.7-Panorama This setting will enlarge the image to fit the screen by stretching the image horizontally while holding the correct proportions at the centre of the image.
22 7.3.4-Auto Scart When this feature is set to On and when you operate an external device that is connected to your LCD television via scart, TV will automatically switch to AV mode where the device is connected. When it is set to Off, your TV does not switch to the external device automatically.
23 8 To be able to receive a quality teletext broadcast, a good aerial system and a broadcast signal that is not weak, with no reflections and interference from other channels are required. Even in a very clear reception, it is normal for some characters or tabs to be lost.
24 8.9-Clock The Clock function of the SIZE button; press the SIZE button when you want to check the time while watching any television channel. In that case, a clock will appear for a few seconds on the lower right corner of the screen. 8.10-Fastext The coloured buttons on the remote control are for the fastext feature.
25 9 External Equipment Connections: Your TV is equipped with 10 inputs including aerial input, which allows for the external device connection. These inputs are: 1-Aerial input 2-SCART1 input 3-SCART.
26 9.3-Connecting external equipment via AV connection Side view of TV CAMERA DECODER DVD SATELLITE RECEIVER GAME CONSOLE AV : To watch the picture of the broadcast device connected using the Phono input, select AV option from the Source menu and press OK button.
27 Connect to the HDMI input at the back of your TV by using the connector located on your PC or your digital video-transmission device with a suitable cable (not supplied with the TV). Note: To be able to watch an image in the HDMI mode, your computer must be equipped with a HDMI graphic card.
28 9.7.1-PC Connection: Connect the D-Sub15 connector to the PC-IN socket at the back of your television by using an appropriate cable (not supplied with your television).
29 TO REMOVE A CI CARD When removing the CI card, make sure you pull out the CAM complete with the card fitted. This function enables you to watch the scrambled services (pay services) in some channels. If you remove the CI Module, you can only watch the available non scrambled digital programmes.
30 10 Help and tips Failure Possible cause Solution The television does not function Is the power cord connected to the mains supply? Check the power cord. Is the On/Off button on? Check if the On/Off button is on. Poor picture quality (analogue TV) Is the aerial cable connected? Check the aerial cable.
31 11 SCREEN SIZE 40” Panel type 40”, 16:9 Active matrix TFT Sound output 2 x 10 W Power consumption 210 W Stand by power value <2.5 W Teletext page 250 Loudspeaker impedance: 8 Ohm Scart 1 STD.
32 12 MAIN UK TRANSMITTER STATIONS UHF CHANNELS STATIONS CT D Regional Main stations BBCI BBC2 ITV CH4 CH5 Map BBCI BBC2 ITV CH4 CH5 Map North West Caldbeck 30 34 28 32 56 12 Bluebell Hill 40 46 43 65.
33 13 Guarantee - Television Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • All repairs necessary as a result of faulty materials,defective components or manufacturing detect.
34 13 HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television.Your new television has been designed and manufactured to the highest quality stadards to give you many years of use.To get the best out of it,please take a few moments to read the instruction book.
Y1A.801.
デバイスBeko 40WLU550FHIDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Beko 40WLU550FHIDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBeko 40WLU550FHIDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Beko 40WLU550FHIDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Beko 40WLU550FHIDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Beko 40WLU550FHIDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBeko 40WLU550FHIDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Beko 40WLU550FHIDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBeko 40WLU550FHIDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。