UnidenメーカーDCX150 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 24
Front cover DCX150 Series UN ID EN CORDLESS TELEPHONES UU683BH(DCX150) OM_0807.indd 1 8/7/2008 11:37:53 AM.
1 Welcome Congratulations on your purchase of the Uniden DCX150 accessory handset and charging cradle. Y ou can place this fully featured cordless handset anywhere your home has AC power . Note: Illustrations in this manual are used for explanation purposes.
2 Compatible Bases This handset is compatible with Uniden's 1.9 GHz DECT 6.0 Expandable phone system: the DECT1500, DECT2000 and DECT3000 series. Please visit our website at www .
3 Installing the Battery Use only the Uniden BT -1015 rechargeable battery pack supplied with your cordless telephone. BLACK RED Unpack all hand- sets, battery packs, and battery covers. (If the battery cover is on the handset, press in on the notch and slide the cover off.
4 Charging the Accessory Handset The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charging cradle.
5 Registering the Handset Y ou must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.
6 To register to any other compatible base: If the other base has an LCD display: • With the phone in standby , press MENU/SELECT on the base. Press to move the cursor to Register Handset and then press MENU/SELECT . Handset Registering appears. If the other base does not have an LCD display: • Disconnect the base AC adapter .
7 Resetting the Handset Without the Base If the original base this handset was registered to is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base. Press and hold END and # for at least ve seconds, until the SYSTEM RESET menu appears.
8 Using the Interface Parts of the Handset T welve-key dial pad key (down) key (caller ID/right) MENU/SELECT key /MUTE key (messages/mute) END key # key key (speaker) Microphone Charging contacts /TON.
9 Reading the Display In standby During a call 1((# *CPFUGV 0GY%+& Handset ID and banner Number of new Caller ID calls received 6CNM.
10 Using the Four-way Function Key Y our handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. Press the left side of the key to open the phonebook.
1 1 When [ Aa ] appears on the displa y , capital letters a re displayed rst, then lower case letters, and then the number on the key . When [ aA ] appears on the display , lower case letters are displayed rst, then the number on the key , and then capital letters.
12 Using Y our Accessory Handset Making and Receiving Calls With the earpiece With the speaker phone Make a call Pick up the handset from the cradle. Dial the number . Press T ALK/FLASH . 1) 2) 3) Pick up the handset from the cradle. Dial the number .
13 Using Caller ID and Call W aiting If you subscribe to Caller ID, you can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full and you receive an incoming call, the oldest record will be automatically deleted to make room for the new record.
14 Using the Phonebook Y ou can store up to seventy entries in the handset’s phonebook. If the phonebook is full and you try to add a new entry , you will hear a beep and see Memory Full in the display . Delete some of the existing entries before trying to add new ones.
15 Redialing a Number T o redial one of the last ve numbers dialed on this handset, press REDIAL/P AUSE . This opens the redial list. Use and to nd the number you want to dial, and press T ALK/FLASH or in standby , or press MENU/SELECT during a call.
16 Using Hold, Conference, T ransfer and Intercom Put a call on hold Press CLEAR/INT’COM . If you leave a caller on hold for more than ve minutes, the call will be disconnected. T o return to the party on hold, press T ALK/FLASH or . Join a c all a lrea dy in progress T o join a call already in progress, press T ALK/FLASH or .
17 Accessing Y our Answering System If your base h as an answering sy stem, you can use your handset to get your messages and change your answering system setup. The answering system plays your new messages (that you have not listened to yet) rst. If you have no new messages, the system plays your old messages.
18 Accessing V oicemail If your base doesn't have an answering system and you subscribe to a voice mail service, you can program your handset to automatically dial the access number . Press MENU/SELECT . Move the cursor to Handset Setup and press MENU/SELECT .
19 Battery Replacement and Handling With normal usage, your battery should last about one year . If the tal k time becom es short ev en after the battery is recharged, please replace the battery . Y ou can purchase a replacement battery by calling Uniden's Parts department.
20 The FCC W ants Y ou T o Know Changes or modications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product. This device complies with part 15 of the FCC rules.
21 One Y ear Limited W arranty Important: Evidence of original purchase is required for warranty service. W ARRANTOR: UNIDEN AMERICA CORPORA TION ("Uniden") ELEMENTS OF W ARRANTY : Uniden wa.
22 LEGAL REMEDIES: This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada.
© 2008 Uniden America Corp., Fort W orth, T exas. Printed in China. UUZZ01683BZ(0) * Central Standard T ime. Detailed customer ser vice hours are available at www .uniden.com. VISIT OUR WEBSITE A T WWW .UNIDEN.COM IF Y OU Are Looking F or A P art Or Accessor y .
デバイスUniden DCX150 Seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Uniden DCX150 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DCX150 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DCX150 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DCX150 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DCX150 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DCX150 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DCX150 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DCX150 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。