UnidenメーカーDCX300 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 24
6/*% &/ $03% -&4 4 5&-& 1)0/ &4 % $ 9 4 F S J F T.
1 Welcome Congratulations on your purchase of the Uniden DCX300 accessory handset and charging cradle. Y ou can place this fully featured cordless handset anywhere your home has AC power . Note: Illustrations in this manual are used for explanation purposes.
2 Compatible Bases This handset is compatible with Uniden's 1.9 GHz DECT6.0 Expandable phone system: the DECT2000 and DECT3000 series. Please visit our website at www .uniden.com for the most up-to- date list of compatible bases. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items.
3 Installing the Battery Use only t he Uniden B T -101 1 rechargeable battery pa ck supplied with your cordless telephone. Installing the Belt Clip Insert the tabs on the sides of the belt clip into the holes on either side of the handset. Press the belt clip down until it clicks into place.
4 Charging the Accessory Handset The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charging cradle.
5 Installing the Optional Headset Y our phone may be used with an optional headset. T o use a headset, insert the headset plug into the headset jack. Headsets may be purchased by calling the Uniden Parts Department. See the back cover page for contact information.
6 To register to a DECT2060 or DECT2080 base: Disconnect the base AC adapter . Press and hold [nd hs] while you reconnect the adapter . Keep pressing [nd hs] until the charge LED starts to blink. On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.
7 Resetting the Handset Without the Base If the original base this handset was registered to is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base. Press and hold [ ] and [#] for at least ve seconds, until the SYSTEM RESET menu appears.
8 Using the Interface Parts of the Handset Headset jack cover Belt clip hole Speakerphone speaker and ringer Battery compartment new message LED Earpiece Display (LCD) [Int’com/clear] key (intercom/.
9 Reading the Display Day of the week and time Handset ID and banner Call duration In standby During a call 570#/ *CPFUGV The ringer off icon indicates that the ringer is turned off. The voice mail icon appears when you have messages waiting at your service provider voice mail box.
10 Using the Four-way Function Key Y our handset has a four-way function key that allows you to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook.
1 1 If two letters in a row use the same number key , enter the rst letter , then use [right] on the four-way function key to move the cursor to the next position to enter the second letter . For example, to enter the word "Movies": Press [6] once to enter M .
12 Using Y our Accessory Handset Making and Receiving Calls With the earpiece With the speaker phone Make a call Pick up the handset from the cradle. Dial the number . Press [ /ash] . 1) 2) 3) Pick up the handset from the cradle. Dial the number . Press [ ] .
13 Using Caller ID and Call W aiting If you subscribe to Caller ID, you can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full and you receive an incoming call, the oldest record will be automatically deleted to make room for the new record.
14 Using the Phonebook Y our handset can store up to seventy names and numbers in your phonebook. When all the phonebook entries are full, you will hear a beep and MEMORY FULL appears. Y ou cannot store any additional names and numbers unless you delete some of the existing ones.
15 Redialing a Number T o redial one of the last ve numbers dialed on this handset, press [ /pause] . This opens the redial list. Use [ ] and [ ] to nd the number you want to dial, and press [ /ash] or [ ] in standby , or press [Select/menu] during a call.
16 Using Hold, Conference, T ransfer and Intercom Put a call on hold Press [Int’com/clear] . If you leave a caller on hold for more than ve minutes, the call will be disconnected. T o return to the party on hold, press [ /ash] or [ ] . Join a c all alre ady in progress T o join a call already in progress, press [ /ash] or [ ] .
17 Accessing Y our Answering System If your base h as an answering s ystem, you can u se your handset to get your messages and change your answering system setup. The answering system plays your new messages (that you have not listened to yet) rst.
18 Accessing V oicemail If your base doesn't have an answering system and you subscribe to a voice mail service, you can program your handset to automatically dial the access number . Press [Select/menu] . Move the cursor to HANDSET SETUP and press [Select/menu] .
19 Battery Replacement and Handling With normal usage, your battery should last about one year . If the tal k time beco mes short e ven after t he battery is recharg ed, please replace the battery . Y ou can purchase a replacement battery by calling Uniden's Parts department.
20 The FCC W ants Y ou T o Know Changes or modications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product. This device complies with part 15 of the FCC rules.
21 One Y ear Limited W arranty Important: Evidence of original purchase is required for warranty service. W ARRANTOR: UNIDEN AMERICA CORPORA TION ("Uniden") ELEMENTS OF W ARRANTY : Uniden wa.
22 LEGAL REMEDIES: This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada.
8QLGHQ$PHULFD&RUS )RUW: RUWK7 H[DV3ULQWHGLQ&KLQD 88==%= &HQWUDO6WDQGDUG7 LPH 'HWDLOHG.
デバイスUniden DCX300 Seriesの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden DCX300 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DCX300 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DCX300 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DCX300 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DCX300 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DCX300 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DCX300 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DCX300 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
