UnidenメーカーDECT 1807の使用説明書/サービス説明書
ページ先へ移動 of 23
Quick Start Guide DECT 1802 Quick Start Guide Her e ! Quick Reference Guide St a r t St a r t Her e ! Quick Start Guide - next page... Optional Handset and Charge Base Suits Models- Dect 1805 Dect 180.
i PRECAUTIONS A VOID - T elevision sets and other electronic appliances CHARGE - the new phone for 15 - 20 hrs. DON ’ T - overload the power outlet. A VOID - multi power boards A VOID - connecting m.
ii This page is a very condensed version of your owners manual. It is designed to allow you to get your phone installed and operating as quickly as possible - however it does not attempt to explain any of the advanced features of your phone.
The Handset will display the Base Station RFPI. (The RFPI is a unique 10 digit number to each Base Station and serves to indicate that a Base Station has been located.) Press to accept the RFPI. Finally a Handset number must be selected. Each Base Station can support up to six Handsets.
1 CONTENTS Installation & Safety ..............................................................................................................................................i Quick Start Guide: Step 1 - Installation .............................
SETTING UP 2 digital stor e menu clear rdl• pause flas h ghi pqrs tuv wxyz jkl mno def abc up • down int HANDSET DISPLA Y - All icons displayed - 1) Battery icon 2) Menu icon 3) External Call icon.
CHARGING THE HANDSET BA TTERIES Charging of the Handset batteries takes place automatically when the Handset is placed on the Main Base or Additional Charger .
4 SETTING UP DESCRIPTION OF DISPLA YED SYMBOLS EXTERNAL CALL The External Call icon is visible when is pressed. The icon flashes when: there is an incoming call, a call has been dropped, another Hands.
ADV ANCED FUNCTIONS Handset Registration Handsets need to be registered with Base stations. Each Handset can be registered with up to four Base stations. Up to six Handsets can be registered to each Base station. GAP Registration This T elephone conforms to the GAP (Generic Access Profile) standard.
BASE ST A TION REGISTRA TION KEY Press and hold the Base Station key for five seconds. The T alk LED on the Base Station will flash to indicate that it is in registration mode. The user then has 90 seconds to complete the handset registration procedure.
If this is entered correctly , the Handset will start to search for the Base Station. If the PIN is incorrect, a single low tone will be heard and another opportunity to enter the PIN offered.
The handset numbers already registered are displayed. In the example shown, handsets 1,2 and 6 are registered. Press the handset number to be de-registered. eg Press The selected Handset is now de-registered. PIN CODE CHANGES The default System PIN (the PIN that the unit arrives with) is 1111.
SWITCHING THE HANDSET ON AND OFF T o turn the handset on: Press until the display is visible. The Main Base number is shown on the left and the handset number shown on the right. (These numbers may differ from those shown below .) T o turn the handset off: Press and hold until the display goes blank.
MAKING AN EXTERNAL CALL Making an external call is very easy -there are several styles of call: • On-Line Dialled Calls • Pre-Dial Calls • Memorised Number Call • Last Number Redial • Caller ID Dial On-Line Calls Press When the dial tone is heard, key in the number .
Dialling from memory using the 2 digit directory location Press the and enter the 2 digit directory number 01-20 that refers to the number you wish to dial. If the number is correct, press to dial the displayed number . If the number you selected is the wrong memory location, you may use to scroll through the memory locations, or press to exit.
BASIC ACTIVITIES 12 int INT 0 0 1 1 0 0 1 1 7 7 6 6 3 3 5 5 5 5 5 5 7 7 6 6 5 5 1 1 int Caller ID features are not available in New Zealand Last Number Redial Calls The handset stores the last four numbers called. Press to display the last number called.
RECEIVING A CALL When a Handset receives an incoming call press . The appropriate icon will be displayed for the duration of the call. If the Handset is resting in the Charge Base and the AutoT alk feature is enabled, simply lifting the handset will connect the call.
STORING DIAL MEMORIES Each Handset can store up to 20 telephone numbers in Dial Memories. Each number can be up to 24 digits long. Storing a number in memory Press then . Press until an empty location (location number followed by 3 bars), is reached. Enter the telephone number to be stored.
Delete a Number from Memory Numbers held in a Dial Memory locations can be deleted. Press then Press to step to the number to be deleted. When the number to be deleted is displayed, short presses of the Power/Delete key will delete the last digit of the number .
HANDSET RING VOLUME The Handset Ring V olume can be adjusted through five levels (0 through 4). Press then . The display shows the current ring volume setting; the current setting is level 2 Y ou may step through the available settings by pressing .
SUGGESTION • Make sure the AC adaptor is plugged into the base and wall outlet and switched on. • Make sure the handset is sitting correctly in the base. • Make sure the charging contacts on the handset and base are clean. • Move the handset and/or base to a different location away from metal objects or appliances and try again.
W ARRANTY 18 W ARRANTY One Y ear Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.
THANK YOU FOR PURCHASING A UNIDEN PHONE! © 2002 Uniden Australia Pty Limited Uniden New Zealand Limited Printed in China UAZZ01589ZZ Dect 1802 Qk 7/19/02 3:45 PM Page 23.
デバイスUniden DECT 1807の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Uniden DECT 1807をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DECT 1807の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DECT 1807の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DECT 1807で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DECT 1807を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DECT 1807の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DECT 1807に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DECT 1807デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。