UnidenメーカーDECT 1812の使用説明書/サービス説明書
ページ先へ移動 of 28
DECT 1812 clr OK rdl/p 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0 # 3 def m e n u i n t MANUAL OWNER’S.
i CHARGER HANDSET FUNCTIONS S = Standby Mode (Not holding a call) T = T alk Mode (During a call) clr OK rdl/p 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0 # 3 def m e n u i n t Phonebook Dialling .
ii DECT1812 Quick Reference Guide St a r t St a r t Her e ! Her e ! Installation This page is a very condensed version of your owners manual and does not attempt to explain any of the advanced features of your phone. A simple guide to setting up your new phone.
Installing the Handset Batteries Press battery cover release. Slide cover off. Install the 3 rechargeable Ni-MH batteries. Slide the battery cover back until it snaps into place Place the handset on the base and charge uninterrupted for 14 hours.
Handset and Base Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Step 1 - Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Step 2 - Charging the Battery . . . . . .
2 INTRODUCTION Congratulations on your purchase of the Uniden DECT 1812 cordless telephone. This phone is designed for reliability , long life and outstanding performance utilising the latest in 1.8 GHz Digital Enhanced Cordless T elecommunication technology .
3 INCLUDED IN YOUR P ACKAGE Handset Charger clr OK rdl/p 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0 # 3 def m e n u i n t T o get the most from your phone, please read this owner’ s manual thoroughly . Be sure to complete and mail the product registration form.
4 When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury: 1. UNIDEN DOES NOT represent this unit to be waterproof. T o reduce risk of fire, electrical shock or damage to the unit, DO NOT expose this unit to rain or moisture.
5 [OK] Phone book: Short dialling phone book access in the Standby Mode and T alk Mode Function Select Key : Select various functions [menu] Menu: Enter/ confirm programming functions in the Standby M.
6 Display Symbols ● ● 1. ANTENNA : The ANTENNA symbol shows the handset is searching for radio connection. ● ● 2. TALK: The T ALK symbol appears when pressing the T alk ( ) switch to initiate a call. ● ● 3. EXTERNAL CALL: The EXT symbol is used for external calls.
7 MAKING EXTERNAL CALLS There are several ways to make an external call using your DECT 1812 phone. 1. Press talk [] key on the handset. Enter the number you require and you will be connected automatically . 2. Enter the number you require. The number will appear on the LCD but won't be dialled.
8 POWER KEY Press and hold the power [] key to turn the handset power on or off. In most situations it is recommended to leave the power on the handset at all times so calls can be received. RANGE OUT If RANGE OUT appears on your LCD, your handset is out of range of the base unit and will not be functional until you move back into range.
9 PHONE BOOK Y ou can store up to 20 frequently called numbers in your handset's phone book. Each number can have up to 20 digits. T o store a number: • in Standby Mode, enter the telephone number you wish to store and press [OK] . • NAME? will be displayed.
10 CALL W AITING AND CALLER ID If you have subscribed to Call waiting and/or Caller ID through your local telephone company , the following special features are available on your DECT 1812 telephone. Flash (Call waiting) If the call waiting tone sounds while you are on a call: New Zealand • press [menu] to switch between callers.
11 Delete all Caller ID numbers from the memory • press [menu] key and CALLER ID will be displayed in the LCD. • press [OK] key to choose this menu item. • press [clr] and DELETE MEM? will be displayed. • press [menu] and DELETE ALL will be displayed.
12 EARPIECE VOLUME 1. T o change the earpiece volume during a call, press the power [] key on the handset. 2. T o change the earpiece volume in Standby Mode • press [menu] key until you reach the EAR VOLUME display on the LCD. • press [OK] key to choose this menu item.
13 USER NAME Y ou can programme your handset to display your name (up to a maximum of 10 letters). Look at this example for the user name FRED first. • press [menu] key once and then press [*] three times to reach the USER NAME display on the LCD. • press [OK] key to choose this menu item.
14 HANDSET INTERNAL RING MELODY AND VOLUME If you will be receiving internal calls from your an optional DECT1812 Handset, you can programme a different ring melody and volume to show that the call is an internal one.
15 RESETTING YOUR BASE UNIT The base unit can be reset to default factory values. RESET ALL will desubscribe all connected handsets and put the base unit into subscription mode.
16 REGISTERING A HANDSET TO A BASE UNIT Each handset must be registered to a base unit in order to make and receive calls. The DECT 1812 is automatically registered to the first base unit for you. A handset can be registered to up to four base units. • press and hold the [PAGE] key on your base until ringing begins (15-20 seconds).
17 DEREGISTERING A HANDSET Y ou can delete a handset registration from a base unit using handset 1 only . • press [menu] key until you reach the BASE SETTING display on the LCD. • press [OK] key to choose this menu item. • press [menu] key until you reach the HANDY DESUB option.
18 HANDSET PIN NUMBER Y our handset will be set to the default PIN number setting of 1590. You can also choose your own PIN number . • press [menu] key until you reach the H-CHANGE PIN display on the LCD. • press [OK] key to choose this menu item.
19 Reset your handset as follows: • press [menu] key until you reach the H-RESET display on the LCD. • press [OK] key to choose this menu item. • PP PIN: will be displayed. • enter your 4 digit PIN number and press [OK] . • press [menu] key to scroll between RESET ALL and INITIALIZE options.
20 TROUBLESHOOTING YOUR NEW PHONE If your phone is not performing to your expectations, please try these simple steps first before calling Uniden customer service . TROUBLE SHOOTING The charge light won’t come on when the handset is placed on the base.
21 Operating T echnology TDMA (T ime Division Multiple Access) ADOCM (Adaptive Differential Pulse Code Modulation) DCA (Dynamic Channel Allocation) Frequency: 1881.782 to 1897.344 MHz (10 channels) Power requirements: Rechargeable NiMH battery Size (without antenna): 45mm (W) x 27mm (H) x 135mm (D) Weight: Approx.
22 One Y ear Limited W arranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENT OF .
23 NOTES.
THANK YOU © 2001 Uniden Australia Pty Limited Uniden New Zealand Limited FOR PURCHASING A UNIDEN PHONE!.
デバイスUniden DECT 1812の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden DECT 1812をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DECT 1812の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DECT 1812の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DECT 1812で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DECT 1812を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DECT 1812の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DECT 1812に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DECT 1812デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
