UnidenメーカーDECT1725の使用説明書/サービス説明書
ページ先へ移動 of 44
Series Owners Manual OWNER'S MANU AL DECT1725 DECT1725+1 DECT1725+2.
W elcome… Introducing your Digital Cordless T elephone What’ s in the box: For each additional handset, you will have the following: • Caller ID* to see who’s calling before you pick up the phone • 40 Number Calls log • 50 Names and numbers phonebook • 10 Last number redial • 10 Handset ringer melodies to choose from.
Setting up .........................................................................4 Y our handset ...................................................................7 Y our DECT1725 base and charger (+1, +2 models only) .............................
Settings menu .............................................................26 Default settings ...........................................................31 Network services ........................................................32 Using extra handsets .
Setting up Follow these simple steps to prep are your phone(s) ready for use. Finding a location Connecting your phone Make sure your phone is: • Within 1.8 metres of a power and phone socket so that the cords will reach. • At least 1 metre away from other electrical appliances, to avoid interference.
Preparing the handset s Battery Performance Installing and charging the handset batteries. 1 Remove the battery compartment cover . Press down on the semi-circle indent and slide the cover off. Connect the supplied batteries with the correct polarity .
Setting the date and time Connecting the telephone line cord High Speed Internet TEL LINE The phone uses the 12 or 24 hour clock. 1 Press . 2 Press or to select and press . 3 Press or to select and press . 4 Press or to select and press . 5 Press or to select and press .
Y our Handset Earpiece/Receiver Display Clear Down Redial/Flash T emporary T one Menu/OK Hook Intercom #/Lock • Use to delete incorrect digits or letters • Press to go back to the previous menu • Press and hold to exit menu and return to standby .
Y our DECT1725 base and charger (+1, +2 models only) AC power socket T elephone line socket charge LED find handset key BASE (yellow) - Lights up when handset is charging in the cradle.
Y our handset display The following figure shows the layout of icons on your handset display . Menu Indicates more characters to display to the left Indicates more characters to display to the right Indicates new CID Displayed when viewing the phonebook list or in the phonebook menu.
St andby Display Once charged, your handset display will be as below , displaying the handset name and number , and time and date. This is referred to as ‘st andby mode’.
Quick Guide Function Button press Make a call or press , enter number . Preparatory call Enter number , or press . Adjust earpiece volume During a call, or . End a call or place handset on base. Receive a call Phone rings, . Redial Press , then or to display number or press .
Using your phone Make a call Adjust the earpiece/receiver volume during a call Preparatory dialling (pre-dial) Handset range Call timer 1. Press . The symbol is displayed. When you hear the dial tone, dial the number you want. The number is shown in the display .
Handsfree mode End a call Receive a call Call W aiting Australia: New Zealand: Receiving internal calls Y ou can use handsfree mode to talk to your caller without holding the handset to your ear . Y ou can speak into the handset microphone and listen over the loudspeaker .
Redial Redial the last number called Redial any of the last 10 numbers called Store a redial number to the phonebook Y our handset saves the last 10 numbers called into a redial list. Y ou can select and redial any number from the list at a later time.
Deleting numbers from the redial list Mute (privacy) Finding/paging handset s T o stop the paging ring: 1 In standby mode, press to display the last number called. 2 Press or to display any of the last 10 numbers called. 3 With the number you want displayed, press 4 Press or to select the number selected or numbers in the list.
Keypad lock The keypad lock helps prevent accident al dialling when you are carrying the handset around and can also be used to stop younger children dialling out accidentally . Press and then Switch the keypad lock ON Switch the keypad lock OFF 1 Press and then .
Using the phonebook Y ou can store your 50 frequently used names and numbers in the phonebook for easy dialling. Phonebook entries are stored alphabetically . 1 Press . 2 Press or to select . Press . 3. Select . Press . 4 appears. Enter name using the keypad, then press .
Entering a ‘pause’ in a stored number View and dial a phonebook entry T o search alphabetically Edit a phonebook name/number Y ou may need to enter a pause in some international or charge card numbers or if you are connected to a switchboard. When storing a number , at the point where you want a pause, press and hold .
Delete a phonebook name/number Phonebook status 1 Press . 4 Press or to display the name for the entry you want (or search alphabetically). Press . 5. is displayed. Press . This allows you to show how many entries are stored in the phonebook. 1. Press .
Handset and base menu settings Handset earpiece Handset ringer volume Handset speaker There are 5 earpiece volumes to choose from. 1. Press to access the main menu. 2. Press or to select and press . 3 Press or to select and press . 4. Select and press .
Handset ringer type Auto answer There are 10 handset ringer melodies. Y ou can select different ring tones for external calls and internal calls. 1. Press to access the main menu. 2. Press or to select and press . 3. Press or to select and press . 4. Press or to select or and press .
Alarm Handset name Y our phone allows you to set an alarm. 1 Press to access the main menu. 2 Press or to select Press . 3 Press or to select Press . 4 Press or to select or . Press 5 If you select , enter time for the alarm using the number keypad. 6 Press .
Language Base ringer volume Y ou can change the language the menu display will use. There are 16 languages to choose from. 1 Press to access the main menu. 2 Press or to select and press . 3 Press or to select . Press . 4 Press or to select language. Press to confirm.
[24] Base ringer type There are 5 base ringer melodies to choose from. 1 Press to access the main menu. 2 Press or to select and press . 3 Press or to select and press . 4 Press or to select and press . 5 Press or to select the melody you want. Y ou will hear a sample of each as you scroll through the melodies.
Call Barring When switched on, Call Barring prevents calls being made. 1 Press to access the main menu. 2 Press or to select . Press . 3 Press or to select Press . 4 is displayed. Enter the PIN code using the number keypad. Press . 5 Press or to select or .
Settings menu T ones Flash Changing the Flash time Y ou can switch on or off the tones for key touch, battery low , and out-of-range alarm. For example, when the key tone is set to ON, you will hear a tone each time you press a keypad button. 1 Press to access the main menu.
Dial mode T one Dialling Switch-Over (Australia only) Registering a new handset Y ou can set your phone to use either T one or Pulse dialling. The pre-set setting is TONE dialling, where you will hear a tone beep each time you dial a number . Most modern exchanges and switchboards use T one dialling, so you should not need to change this setting.
On the handset you want to register: 5 Press . 6 Enter the base PIN code. Pre-set base PIN ode is 0000. 7 Press . Y ou will hear a confirmation tone when registration is complete. When in standby mode, the new handset number will be displayed. The handset will automatically be allocated with the next available handset number .
Base PIN code Selecting a base Y ou need to enter the base PIN code when you are registering handsets. For security reasons you may wish to change the PIN code. Y ou can choose a PIN code up to 4 digits long. If you reset the base from the handset, base PIN code will be 0000.
Resetting your phone For the base: For the handset: If you reset your phone, both the base and handset will return to their pre-set (default) settings. If you have more than one handset registered to your base and you complete the following procedure, only the handset you reset and the base will go back to the default settings.
Default settings Handset and base Ringer V olume Base Level 4 Handset Level 5 Ringer T ype External Melody 1 Internal Melody 1 T one Key On Battery Low On Range Alarm On Alarm Off Auto T alk On Langua.
Network services TO USE CALLER ID OR ANY OTHER SERVICES DET AILED IN THIS SECTION, YOU MUST FIRST CONT ACT YOUR NETWORK PROVIDER AND SUBSCRIBE TO THE RELEV ANT SERVICE. With CALLER ID the caller ’s number is shown in the handset display as you receive an incoming call so you can see who is calling before you pick up the phone.
View the Calls log Dial calls log number Copy Calls log number to the phonebook 1 Press . The latest calls log entry is displayed (or if there are no entries). 2 Press or to scroll through the calls log. 3 Press or to continue viewing other calls log entries.
Delete Calls log entry(ies) 1 Press to access the main menu. 2 Press or to select and press . The latest calls log entry is displayed. 3 Press or to scroll to the entry you want. If you delete all calls log, skip this step. 4 Press . Select or Press appears.
Using extra handset s If you purchased a multi-pack all your handsets come pre-registered to the base. Y our phone is GAP compatible, which means you can register other DECT (Digitally enhanced cordless telephone) GAP compatible handset s to your base and register your handset to other GAP compatible bases.
T ransferring a call Conference call Y ou can transfer an external caller from your handset to another internal handset. 1 Press . The external caller is put ‘on-hold’. 2 Enter the number of the handset you want to call using the number keypad. 3 When the called handset answers, press or place the handset backs on the base to transfer the call.
Simple solutions The most common problems often have the simplest solutions. We hope that you will not experience any problems with your product, but in the event that you do, this section hopes to overcome any problems quickly and with minimum effort.
Handset is not charging properly Handset will not link up with the base Cannot make a call CALLER ID Caller ’ s details are not displayed Caller ’ s name is not displayed even though it is stored in the phonebook • Check that the charge light is on and that the handset is sitting correctly in the base or charger .
General information This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. • Only use the power supply that came with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone.
• DO NOT position your product: - less than one metre away from other electrical appliances, e.g. TV and radio set s, clock/alarms and computers, or you risk interference. - on antique/veneered wood (as the product may become warm during charging). - on carpets or other surfaces which generate fibres.
How many telephones can I have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. The total recommended REN on one line is 3. If you exceed a REN of 3, your phones may not ring.
Important: Warrantor: ELEMENT OF W ARRANTY : Warranty is only valid in the original country of purchase. W ARRANTY DURA TION: P ARTS COVERED: ST A TEMENT OF REMEDY : PROCEDURE FOR OBT AINING PERFORMANCE OR W ARRANTY : Evidence of original purchase is required for warranty service.
THANK Y OU FOR B UYING A UNIDEN PRODUCT . (c) 2006 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UCZZ01882WZ(0).
デバイスUniden DECT1725の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden DECT1725をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DECT1725の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DECT1725の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DECT1725で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DECT1725を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DECT1725の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DECT1725に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DECT1725デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
