UnidenメーカーDSS3450の使用説明書/サービス説明書
ページ先へ移動 of 56
Owner s Manual OWNER'S MANU AL DSS3450 DSS3450+1.
Content s Welcome 5 Product Overview 6 Parts of the Handset 7 Parts of the Base 8 Handset Icons 9 The St andby Screen 10 Using the Interface 1 1 Inst alling the Phone 13 Basic Setup 19 Adding Extra Ha.
Deleting Phonebook Entries 28 Deleting All the Phonebook Entries at Once 29 Copying Phonebook Entries to Another Handset 29 Changing the Handset Banner 30 Selecting Ring T ones 31 Activating AutoT alk.
Maintenance 46 T roubleshooting 47 Common Issues 49 Liquid Damage 52 Specifications 53 Index 54 W arranty 55 Battery Replacement and Handling 46 Battery Contact Maintenance 46 Low Battery Alert 47 T a.
Welcome T erminology used in this Manual Thank you for purchasing a Uniden Multi-Handset phone. This unit is dif ferent from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets.
St andby St ation T alk The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. Any handset or the base. A telephone line has been activated on the handset enabling a dial tone. [6] Product Overview Main Features: ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 2.
Part s of the Handset 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. S peakerphone Speaker and Ringer 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display 9. key 10. key 1 1. key (talk/flash) 12. key (phonebook) 13.
[8] Part s of the Base 24. Base charging contacts 25. Base S peaker 26. key 27. Charge LED 28. in use LED 29. Base Antenna 30. keys (V olume Up/Down) 31. key 32. key 33. key (intercom/transfer) 34. key and LED (do not disturb) 35. key 36. key 37. Base Microphone 38.
[9] B P Handset Icons ICON ST A TUS DESCRIPTION S tandby/T alk S tandby T alk T alk T alk T alk The icon indicates the handset battery status: full, medium, low , and empty . The icon indicates that the ringer is turned off. The icon appears when you mute the handset.
The St andby Screen When the phone is in st andby , the handset display shows the following items: [10].
[1 1] Using the Interface Using the Handset Menus Using the Four-way Function Key [menu/clear] [select/ ] [ ] Y our handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button.
[12] Entering T ext from Y our Handset Y ou can use the number keypad on your phone to enter text by referring to the letters printed on each number key . When you press the number key in a text entry field, the phone displays the first letter printed on the number key .
Inst alling the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a power outlet that is not controlled by a wall switch.
[14] W all Mounting the Base This phone can be mounted on any standard wall plate. 1. Snap the wall mount adapter into the notches on the base top. 2. Plug the AC adapter into the jack. 3. Route the AC adapter cord through the molded wiring channel as shown.
[15] Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
[16] Inst alling the Rechargeable Battery Use only the Uniden BT -909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install a battery . 1. Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
[17] Connecting to the Phone Line High Speed Internet Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a standard telephone wall outlet. If your phone line also has High S peed Internet please ensure you are using an approved line filter before connecting the telephone cord.
[18] Inst alling the Belt Clip T esting the Connection 1. Line up the holes on each side of the handset. T o attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. 2. T o remove the belt clip , pull either side of the belt clip to release the tabs from the holes.
[19] Basic Setup Setting the Day and Time Note: If you don't press any keys for two minutes when setting the day and time, the phone exit s the menu. [menu/clear] [select/ ] [select/ ] [select/ ] [select/ ] T o change the day and time shown in the display , follow the steps below .
Activating Caller ID on Call W aiting Activating Distinctive Ring Y our phone supports Caller ID on Call W aiting (CIDCW), so you see the name and number of someone who calls when you're already on the line. Y ou need to subscribe to these features with your phone company before you can use them.
number into your phone, you can simply press to access your voice mail. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone.
[22] Activating Name T ag (POP ID) Activating the Insert 0 The Name T ag feature works with the Caller Display number from Caller ID. A subscription to the Caller ID service is required from your network provider . There is usually a fee for this service.
[23] Adding Extra Handset s Y our phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. Y ou can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger .
[24] Registering Accessory Handset s If you purchase an accessory handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory . When charged, pre-registered handsets display a handset ID number .
[25] Resetting Handset s Creating Phonebook Entries If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1. Press and hold and for at least 5 seconds, until the SYSTEM RESET menu appears.
[26] keypad to enter a name for this entry; the name can contain up to 16 characters. (See p age 12 for entering text instructions.) If you do not want to enter a name for this entry , your phone stores this entry as <No Name>. Press 5. Enter the number for this entry (ST ORE/EDIT NO.
[27] Programming Base Speed Dial Numbers The dual- keypad phone can store 10 speed dial numbers, to . Follow the steps below to store new speed dial numbers in the base. ( Handset speed dial numbers are stored as part of a phonebook entry . See on page 25 for information on programming handset speed dial numbers.
Editing an Existing Phonebook Entry Storing Caller ID or Redial Numbers in the Phonebook Deleting Phonebook Entries 1. With the phone in st andby , press to open the phonebook. 2. Select DIAL/EDIT . 3. Use or to scroll through the phonebook entries. When you come to the entry you want to edit, press .
[29] Deleting All the Phonebook Entries at Once Copying Phonebook Entries to Another Handset 1. When the phone is in st andby , press . 2. Move the cursor to select DELETE ALL, and press . DELETE ALL? appears in the display . 3. Select YES, then press .
[30] Customizing Y our Phone Changing the Handset Banner [menu/clear] [select/ ] Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. Y ou can change the name your phone displays by changing the banner display .
[31] Selecting Ring T ones Y ou may choose from 10 tones or 10 melodies for your phone's primary ring tone. Each station can use a different ring tone or melody . The available ring tones are listed below: 1. Press . 2. Select the HANDSET SETUP menu, and then the RINGER T ONES submenu.
Activating AutoT alk Activating Any Key Answer AutoT alk allows you to answer the phone simply by removing the handset from the cradle. Y ou do not have to press any keys to answer the call. 1. Press . 2. Select the HANDSET SETUP menu, and then the AUTOT ALK submenu.
[33] Using Y our Phone Making a call Answering a call Hanging up From a cordless handset [ / flash] OR [ / flash] [ / flash] [] From a handset speaker phone [] OR [] [] [] From the base speakerphone 1. Remove the handset from the charging cradle. 2. Press .
[34] Keyp ad Lock Use Keypad Lock to disable key response. Y ou can still answer calls, receive page and receive copy phonebook locations - keylock will reactivate after these operations. Press and hold until you hear a confirmation tone. KEYP AD LOCKED appears.
[35] Using the Caller ID List Making a Call from a Caller ID Record Deleting Caller ID Numbers Y ou can store up to 100 Caller ID numbers in each handset.
[36] Using Call W aiting If you have Call W aiting service and a second call comes in when you are on the phone, a call waiting tone will sound. Press and then 2 on the handset OR and then 2 on the base to switch between callers. There is a short pause during the switch.
[37] Redialing a Number Deleting a Redial Record Adjusting the Ringer , Earpiece, and Speaker V olume If you want to delete a phone number from the handset's redial list, follow the steps below: 1. With the phone in standby , press . 2. Use or and to scroll through the redial list.
[38] Adjusting the Earpiece and Speaker V olume Adjusting the Audio T one and Clarity Boost Finding a Lost Handset Y ou can choose from six volume levels for the earpiece and speaker . T o adjust the volume while on a call, press to make it louder or to make it softer .
[39] Using Hold, Conference, and T ransfer Conferencing Placing a Call on Hold During a call, press on the handset or on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD.
[40] T ransferring a Call Answering a T ransferred Call Y ou can transfer a call from one station to another . When a station receives a call transfer , it sounds a paging tone and shows the ID of the station that is p aging. T o accept the call transfer: 1.
[41] Using Special Features Muting the Ringer (One Call Only) Muting the Handset Microphone Privacy Mode (Handset only) While a handset is ringing, press on the handset to mute the ringer for this call. The phone rings again on the next call. Mute turns off the microphone so the caller can't hear you.
[42] Using the DirectLink Communication Feature Using the DirectLink feature, a pair of handsets can function as two-way radios. Y ou can have up to two pairs of handsets using DirectLink at a time. DirectLink communication does not interfere with the main base's ability to make or receive telephone calls.
[43] Making a DirectLink Call Exiting DirectLink Operation Making an Intercom Page 1. T o call another handset with DirectLink communication, press . 2. The display shows TO DIRECTLINK A HANDSET PRESS . 3. Press the number of the handset you want to call.
[44] Answering an Intercom Page Room/Baby Monitor When the intercom page tone sounds, the display shows the ID of the station that is p aging. From the handset, press or . If AutoT alk is on, the handset automatically answers the page when you remove the handset from the cradle.
[45] T one Dialing Switch Over (Australian Model Only) Inst alling the Optional Headset If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects.
[46] Maintenance W arning Battery Replacement and Handling Battery Cont act Maintenance With average use, your phone's battery should last approximately one year . T o order replacement batteries, please visit www .uniden.com.au (Australian Model) or www .
Low Battery Alert T roubleshooting When the battery pack is very low , the phone is programmed to eliminate functions in order to save power . The battery pack needs to be charged when the empty battery icon appears. When LOW BA TTERY appears in the display and the phone is in standby , none of the keys will operate.
[48] T o reset the handset, do the following: [ ] [#/>] Note: It is also possible to reset the handset back to it s original factory settings. All changes including phonebook entries and Caller ID information will be erased.
Changing the Digit al Security Code T raveling Out of Range Common Issues The digital security code is an identification code used to connect the handset and the base. Y our unit ships from the manufacturer with a preset security code. Resetting this code is not normally necessary .
[50] Symptom Can't make or receive calls. Severe noise interference. The Caller ID does not display . The handset doesn't ring or receive a page. Y ou cannot register the handset at the base. Suggestion • Make sure that you are not too far from the base.
Symptom Suggestion The handset doesn't communicate with other handsets. An extra handset can't join the conversation. Room Monitor does not work. The V oice Message Waiting LED flashes, but there are no new messages • Change the Digital Security Code (see page 49).
[52] Liquid Damage Moisture and liquid can damage your cordless phone. Follow the suggestions below if your phone gets wet: If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe of f the liquid, and use as normal.
[53] Specifications Operating T emperature 0 ° Ct o+ 5 0 ° C (+32 ° F to +122 ° F) Notes: Part Number Base: AAD-041S Charging cradle: AAD-600S Input V oltage Base: 240V AC, 50 Hz Charging cradle: 240V AC, 50 Hz Output V oltage Base: 9V DC @ 350 mA Charging cradle: 9V DC @ 210 mA Use only the supplied AAD-041S and AAD-600S adapters.
[54] Index A B C D E F H I K L M N O P R S T V Adjusting Audio T one 38 Answering a Call 33 Any Key Answer 32 AutoT alk 32 Battery Contact Maintenance 46 Battery Replacement and Handling 46 Caller ID .
[55] Important: W arrantor: ELEMENT OF W ARRANTY : DSS3450 W ARRANTY DURA TION: P ARTS COVERED: DSS3450 DSS3450 ST A TEMENT OF REMEDY : PROCEDURE FOR OBT AINING PERFORMANCE OR WARRANTY : Evidence of original purchase is required for warranty service. Uniden Australia Pty Limited A.
THANK Y OU FOR BUYING A UNIDEN PR ODUCT . © 2006 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China UPZZ01428BZ(0).
デバイスUniden DSS3450の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden DSS3450をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DSS3450の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DSS3450の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DSS3450で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DSS3450を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DSS3450の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DSS3450に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DSS3450デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
