UnidenメーカーEXS 9960の使用説明書/サービス説明書
ページ先へ移動 of 46
EXS 9960 4th 99.8.20 4:06 PM Page 1.
Congratulations on your purchase of the EXS 9960 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 900 MHz Spread Spectrum technology. Note: Some illustrations in this manual may differ fr om the actual unit for explanation purposes.
vol call id mem del abc def ghi mno pqrs tuv wxyz oper tone redial/p setup select mute/ring jkl 12 3 45 6 78 9 0# talk flash open backup battery page/find power status DIGITAL SPREAD SPECTRAM 900MHz 1 2 3 4 5 6 7 8 9 10 13 11 12 15 16 17 20 21 19 18 14 22 23 24 27 25 26 28 Controls and functions EXS 9960 4th 99.
29 30 31 1. Handset antenna 2. Headset jack cover 3. Handset battery compartment 4. Ringer off-on switch 5. Handset earpiece 6. LCD display 7. T alk key 8. V olume/Cursor down key 9. Call ID key 10. T one/Backspace key 11. Redial/Pause key 12. Setup key 13.
Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Read this first ..........................................................3 Step 1: Checking the package contents ........
3 This cordless telephone must be set up before use. Follow these steps; Step 1 (page 4) Unpack and check the telephone and accessories. Step 2 (page 5 to 9) Next, choose the best location to set up the base unit.
4 Make sure you have received the following items in the package. • Base unit • Handset • AC adapter (AD-420) • Rechar geable battery pack (BT-999) • Telephone line cord (2) • W all mount .
5 Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS brochure.
6 Connect the base unit If you want to install the base unit on the wall, see page 8. Route the cord. T o AC outlet T o telephone outlet T o TEL LINE T o DC IN 9V AC adapter (supplied) T elephone line cord (supplied) 1 2 Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
7 Use only the supplied AD-420 AC adapter . Do not use any other AC adapter . Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. If your telephone outlet isn't modular , contact your telephone company for assistance.
8 Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. Mounting the base unit on a wall 1 Snap the wall mount adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack.
9 Direct wall plate mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • A void electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.
10 Charge the battery pack for more than 17 hours before you start using your phone. 1 Press in on the battery cover release and slide the cover down until it comes off. 2 Install the nickel-cadmium battery with the label facing down. 3 Slide the battery cover on until it snaps into place.
11 Battery use time (per charge) From fully charged • Four hours coutinuous use. • Seven days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power .
3 The number is dialed. After about 5 seconds, the call-time display appears. 4 T o hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds. 12 On-hook dialing 1 Enter the phone number . (Up to 32 digits.) Example: Enter 8178583300 2 Press .
13 Of f-hook dialing 1 Press . “ Talk ” flashes on the display. Then the volume setting is displayed. For example, if the volume is set to high the display shows: 2 Dial the phone number . Example: Enter 8178583300 3 T o hang up, press or place the handset on the base .
14 1 Phone rings. 2 Press . “ Talk ” and volume setting appears on the display. 3 Talk with the caller . 4 T o hang up, press or place the handset on the base.
15 Adjusting the ringer and earpiece volume Ringer volume In the standby mode, press on the handset to set the handset ringer volume. There are two ringer volume settings; high and low. Ringer on/off switch This switch turns the handset ringer on or off.
16 The last three phone numbers dialed can be quickly redialed. Redialing a call On-hook redialing 1 Press . The phone number that was last dialed appears on the display. 2 Press again. Each press of will display one of the last three numbers dialed. 3 Press .
17 Of f-hook redialing 1 Press . “ Talk ” appears flashing on the display. 2 Press . The last number dialed will be displayed. 3 T o hang up, press or place the handset on the base .
18 In memory dialing operation, you must press a key within 20 seconds or the phone will return to standby . If you return the handset in the cradle the phone will return to standby too. TELEPHONE FEA TURES Memory Dialing allows you to dial a number using just a few key strokes.
19 5 Press . “ Store Number ” is displayed. The cursor flashes indicating that the display is ready for the number to be entered. 6 Use the number keypad to enter the phone number . The phone number cannot exceed 20 digits. • Use the key to enter pause in the dialing sequence.
20 T o exit the memory function without dialing, press . The handset returns to standby . If you press before , you can confirm the name and number stored in the selected memory location. mem select talk Making calls with memory dialing On-hook memory dialing 1 Press .
21 Of f-hook memory dialing 1 Press . “ Talk ” flashes and the volume setting appears. 2 Press . 3 Enter a two-digit number (01 - 20) to select the memory location of the desired phone number . The selected phone number is displayed. Then the number is dialed.
22 Editing a stored name and/or phone number 1 Press and hold for 2 seconds. The display shows the memory screen and any saved name/number . 2 Press and or enter a two-digit number (01 - 20) to select the memory location you would like to edit. 3 Press .
23 7 Use the dial keypad, or key to edit the phone number . The phone number cannot exceed 20 digits. (See page 19.) If you don’t want to change the phone number , skip this step. 8 Press . The handset beeps and displays the confirmation screen. The memory storage is complete.
24 4 Press to move the cursor down to “ Delete Memory ” command line. 5 Press . The following confirmation screen appears. 6 Press to move the cursor to “ Yes ”. 7 Press or . There is a confirmation tone and the entry is deleted. The following screen appears.
25 T o locate the handset 1 Press on the base. 2 The handset beeps for 5 seconds. The following screen appears; 3 Press any key on the handset to end. open backup battery page/find power status DIGITA.
26 Mute Y ou can turn of f the handset microphone so that the person whom you are talking with cannot hear you. When speaking on the handset 1 Press during a call. The microphone is turned off. 2 T o resume a call, press o r . When phone is ringing Press when the phone rings.
Setting Caller ID options There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller ID on Call W aiting), and Area Code. AutoT alk allows you to answer the phone without pressing the button. If the phone rings when AutoT alk is on, simply remove the handset from the cradle and the phone automatically answers the call.
28 1 When the Caller ID message is received, the display shows the caller’s phone number , along with the date and time. The incoming call information is stored in Caller ID record. If the Caller ID service includes the caller’s name, the caller's name appears on the display (up to 15 letters).
29 If a call comes in via a telephone system that does not offer Caller ID service, no information is stored. • “ End ” appears when you have reviewed all messages in the Caller ID list. Press repeatedly to return to the summary screen. Each message can be up to 15 characters for the phone number and the name.
30 The EXS 9960 stores up to 50 messages. If the phone receives the 51st message, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. Deleting a Caller ID message Deleting information from the Caller ID list 1 Press .
31 Deleting all Caller ID name/numbers 1 Press . 2 Press . 3 Press or to select “ Yes ” or “ No ”. 4 Press or . When the pointer is at “ Yes ” : A tone sounds and all stored Caller ID messages are deleted. When the pointer is at “ No ” : The display returns to the summary screen.
32 Calling a party from the Caller ID list Y ou can place a call from the Caller ID list. The EXS 9960 stores up to 50 messages. 1 Press . Select the phone number that you want to dial by pressing or . 2 Press . The displayed phone number dials automatically.
33 Storing Caller ID messages in Memory dialing Messages shown in the Caller ID list can be stored in memory dialing. Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory dialing.
34 Using "Caller ID on call waiting" service “Caller ID” and “Call waiting” are separate services. CIDCW (Caller ID on Call W aiting) per forms the same as r egular Caller ID on a call waiting number . Y ou must subscribe to the “Caller ID on call waiting (CIDCW) services” befor e you can use the following features.
35 If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically next time the battery pack is charged. ADDITIONAL INFORMA TION The digital security code is an identification code used to connect the handset and the base unit.
36 T o attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. T o remove the beltclip Pull both sides of the beltclip to release the tabs from the holes. Y our phone may be used with an optional headset.
37 Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery.
38 TROUBLESHOOTING YOUR NEW PHONE If your phone is not performing to your expectations, please try these simple steps first. Symptom The status LED won't come on when the handset is placed in the base unit. The audio sounds weak and/or scratchy. Can't make or receive calls.
39 SPECIFICA TIONS YOUR NEW PHONE General The EXS 9960 complies with FCC Parts 15 and 68. Frequency control: PLL Modulation: Direct Sequence Spread Spectrum; DBPSK Operating temperature: 0 ° C to +50 ° C (+32 ° F to +122 ° F) Base unit Frequency: 904.
40 INDEX A Adjusting ringer and earpiece volume ...................15 B Battery pack Preparing and charging..10 Replacement and handling ..........................37 C Caller ID Caller ID service .............27 Call W aiting .....................34 Deleting.
EXS 9960 4th 99.8.20 4:08 PM Page 44.
EXS 9960 4th 99.8.20 4:08 PM Page 45.
EXS 9960 4th 99.8.20 4:08 PM Page 46.
デバイスUniden EXS 9960の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden EXS 9960をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden EXS 9960の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden EXS 9960の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden EXS 9960で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden EXS 9960を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden EXS 9960の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden EXS 9960に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden EXS 9960デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
