UnidenメーカーTRU9465の使用説明書/サービス説明書
ページ先へ移動 of 68
.
1 Contents Welcome ....................................................................... 4 Accessibility ............................................................. 4 T erminology used in this Manual ............................. 5 Product Overview .
2 Storing Caller ID or Redial Numbers in the Phonebook ....................................................... 30 Erasing Phonebook Entries ................................... 31 Deleting All Phonebook Entries ............................ 31 Copying Phonebook Entries to another Station .
3 Low Battery Alert ................................................... 53 T alk and Standby T imes ......................................... 53 T roubleshooting ........................................................ 54 Resetting the Handset .......
4 W elcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit.
5 T erminology used in this Manual Standby The handset and the base are not in use. If the handset is on the cradle or [ /ash ] or [ ] on the handset or [ ] on the base is not pressed, no line has been activated. No dial tone is present. CID Caller ID is available from your T elephone provider and is of fered to users on a subscription basis.
6 Product Overview TRU9465 Features: 5.8GHz DSS Expandable System Expands up to 10 Handsets Caller ID/Call W aiting Deluxe Base Keypad Advanced Phonebook Features: Store Up to 100 Names for each stati.
7 TRU9465 - Parts of the Phone The following illustrations show you all of the different parts of your phone. Handset 1 4 7 8 0 9 5 6 2 3 abc ghi jkl mno pqrs tuv wxyz def tone speaker hold pause oper.
8 Base 36 26 27 28 29 37 39 40 41 30 31 32 34 33 23 24 25 43 42 35 38 Base Speaker Base Charging Contacts [dnd] key (do not disturb) and LED Base LCD Soft Keys [ ] key (phonebook) [ ] key (up) [ ] key (caller ID) [ ] key (down) [mute/exit] key [nd hs] key (nd handset) 23.
9 Using the Interface Reading the Handset Display The handset display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description T alk The privacy icon appears when Privacy mode is turned on.
10 Reading the Base Display The base display uses icons to tell you the status of your phone. The table below lists the icons and what they mean. Icon Status Description T alk The talk icon appears while on a call. T alk The privacy icon appears when Privacy mode is turned on.
1 1 Using the Four-way Function Key Y our handset and the base have a four-way function key that allows you to move the cursor (or highlighted area) on the display and ac - cess the most commonly used features at the touch of a button. By moving this key to the left, you open the Phonebook.
12 Entering T ext from your Phone Y ou can use the number keypad on your handset or base to enter text by referring to the letters printed on each number key . When you press the number key in a text entry eld, the phone displays the rst letter printed on the number key .
13 Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: The location should be close to both a phone jack and a continuous power outlet (one which is not con - nected to a switch).
14 W all Mounting the Base This phone can be mounted on any standard wall plate. Snap the wall mount adapter into the notches on the base top. Plug the AC adapter into the DC IN 9V jack. Wrap the AC adapter cord inside the molded wiring channel as shown.
15 Direct W all Mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
16 Installing the Rechargeable Battery Use only the Uniden BT -446 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install a battery: Press in on the handset battery case cover (use the nger indention for a better grip) and slide the cover downward to remove.
17 Connecting the Base and Charging the Handset Connect the AC adapter to the DC IN 9V jack. Connect the AC adapter to a continuous power supply (i.e., an outlet that is not controlled by a switch). Close the handset and place it in the base with the LCD screen facing forward.
18 Installing the Belt Clip Line up the holes on each side of the handset. T o attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. T o remove the belt clip, pull either side of the belt clip to release the tabs from the holes.
19 Changing the Dial Mode Y our phone can communicate with the telephone network in two different ways: tone dial- ing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing.
20 Basic Setup Selecting a Language Y our phone supports three languages: English, French and Spanish. Once you select a language, the menus on the phone will display in that language. The default language is English. Press the MENU soft key . Select the HANDSET SETUP or BASE SETUP menu, and then the HANDSET LANGUAGE or BASE LANGUAGE submenu.
21 Activating Caller ID on Call W aiting and Call Waiting Deluxe Y our phone supports Caller ID on Call Waiting (CIDCW), so you can see the name and number of someone who calls when you’re already on the line. Y our phone also supports Call W aiting Deluxe (CWDX), which gives you a choice of how you want to handle a wait - ing call.
22 Activating the Key T ouch T one Key T ouch T one is the tone your keypad makes when keys are pressed. Y ou can turn this tone on or off. Press the MENU soft key . Select the HANDSET SETUP or BASE SETUP menu, and then the KEY TOUCH TONE submenu. Move the cursor to select ON or OFF .
23 Setting up V oice Mail If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message LED ashes whenever you have messages waiting in your voice mailbox. If you have programmed your access number into your phone, you can simply press the [ ] soft key to access your voice mail.
24 Programming One-T ouch V oice Mail Access Y ou can program your voice mail access number to the [ ] soft key on a station so you can get your messages at the touch of a button. Y our voice mail service provider will supply you with the access number .
25 Adding Accessory Handsets Y our phone supports up to ten (10) handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. Y ou can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger .
26 Registering TCX805/TCX905 Accessory or Extra Handsets If you purchase an accessory handset, you need to register the handset before use. Only one handset can be reg- istered at a time. Handsets supplied with the phone are registered to the base by the factory .
27 Resetting the Handsets If you want to register a handset to a different base or replace a handset with another one, you must rst clear the existing registration data. T o clear , please follow these steps: Press the MENU soft key . Select the DEREGISTERA TION submenu.
28 Setting up the Phonebook Y our phone allows you to store up to 2 numbers per name and up to 100 names in your phonebook in the handset and base. Y our phone shares memory between your phonebook and CID entries. Once you store 100 phonebook entries, CID information will not be stored and will only display at time of new incoming calls.
29 Assign a personal ring tone for this entry (Personal Ring) (Handset only). Y ou can attach a personalized ring tone to each phonebook entry; the phone will use this ring tone when this person calls. Move the cursor to highlight one of the 20 different ring tone options.
30 Editing Phonebook Entries Press [ ] to open. Use [ ] or [ ] on the four-way function key to scroll through the phonebook entries. When you come to the entry you want to edit, press the OPTIONS soft key . Move the cursor to select EDIT SELECTION submenu.
31 If the memory is full, the oldest Caller ID message will be erased from the Caller ID list when you store a Call- er ID message in the phonebook. Erasing Phonebook Entries Y ou can erase individual phonebook entries or erase all the phonebook entries at once.
32 The phonebook entries will be transferred to the designated handset or the base. During the copy process, the re- ceiving handset shows RECEIVING and the Banner name of the sending handset or base. When the transfer is completed, DONE! appears. Copying all the phonebook entries at once: When the phone is in standby , press [ ] .
33 Customizing Y our Phone Changing the Handset Banner Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. Y ou can change the name your phone displays by changing the banner display .
34 Selecting a Ring T one (Handset only) Y ou may choose from 10 melodies or 10 tones for your phone’s primary ring tone. Each station can use a different ring tone or melody .
35 Activating AutoT alk (Handset only) AutoT alk allows you to answer the phone simply by removing the handset from the cra- dle. Y ou do not have to press any buttons to answer the call. Press the MENU soft key Select the HANDSET SETUP menu, and then the AUTOT ALK submenu.
36 Using your Phone From the base speaker phone From a cordless handset From a handset speaker phone Making a call Press [ ] . Listen for the dial tone. Dial the number . OR Dial the Number . Press [ ] . 1) 2) 3) 1) 2) Remove the handset from the charging cradle.
37 Making a call from the Phonebook When the phone is in standby , press [ ] to open the phonebook. Scroll through the list with the [ ] or [ ] on the four-way function keys until you nd the phonebook entry you want to call. (See Finding a Phonebook Entry on page 2 9).
38 Using Caller ID, Call W aiting and Redial Lists If you subscribe to Caller ID from your phone company , your phone will show you the caller ’s phone number and name (if available) whenever a call comes in.
39 Making a call from a Caller ID Record When the phone is in standby , press [ ] (on the right side of the four-way key) to open the Caller ID list. Use [ ] or [ ] to nd the Caller ID record you want to dial. T o add (or delete) a “1” at the beginning of the displayed phone number , press [ tone ] .
40 Using Call W aiting and Call W aiting Deluxe If you have Call W aiting service and a second call comes in when you are on the phone, a call waiting tone will sound. Press [ /ash ] on the handset or [ash] on the base to accept the waiting call.
41 Redialing a Number Y ou can quickly redial the last 3 numbers dialed on each handset and the base. With the phone in standby , press the REDIAL soft key or [redial/pause] on the handset to open the redial list. Use [ / ] to scroll through the redial list.
42 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Ringer V olume Y ou can choose from three ringer volume settings on the handset and base (off, low , and high). With the phone in standby , use [ / ] on the station to adjust the ringer vol- ume.
43 Finding a Lost Handset T o locate a misplaced handset, press [nd hs] on the base when the phone is in standby . All registered handsets will beep for 60 seconds, and P AGING appears on the handset display . T o cancel paging, press any key on the found handset or press [nd hs] on the base.
44 T ransferring a Call Y ou can transfer a call from one station to another . During a call, press [int’com/hold] on the handset or [int'com] on the base. Use [ ] or [ ] to select the station you want to transfer the call to, then press the OK soft key .
45 Using Special Features Do Not Disturb (All Calls) DND allows you to mute the ringer of all registered handsets and the base. With the phone in standby , press and hold [dnd] on the base. Y ou will hear a conrmation tone and the dnd LED illuminates.
46 Using the DirectLink Feature A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea- ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone calls while in use.
47 Making a DirectLink Call T o call another handset with DirectLink, press the DirectLink soft key . Move the pointer to select the handset you want to call, and press the OK soft key . If the handset is out of range or not in DirectLink operation, the display shows OUT OF RANGE.
48 Answering an Intercom Page When the intercom page tone sounds, the display will show the ID of the station that is paging. Press [ /ash ] , [int’com/hold] , or the ANSWER soft key (or [int’com] , [ ] or the ANSWER soft key on the base).
49 Press the OK soft key . MONITOR appears on the handset or the base, and MON- ITORING appears on the base or the handset, and you hear sounds in the room where the handset or base is installed. T o turn off the Room Monitor , press the END soft key or [ ] on either handset or return the handset to the cradle.
50 Installing the Optional Headset Y our phone may be used with an optional headset. T o use this feature, insert the head- set plug into the headset jack. Y our phone is ready for hands-free conversations. Headsets may be purchased by calling the Uniden Parts Department.
51 Maintenance Specications Operating T emperature 0° C to 50° C (32° F to 122° F) AC Adap ter P art N umber Base: AD-830 Charging Cradle: AD-0005 Input V oltage Base: 120V AC, 60 Hz Charging Cradle: 120V AC, 60 Hz Output V oltage Base: 9V DC @ 400mA Charging Cradle: 9V DC @ 210mA Battery Part Number BT -446 Capacity 3.
52 Battery Replacement and Handling With average use, your phone’s battery should last approximately one year . T o order replacement batteries, please contact Uniden’s Parts Department.
53 Low Battery Alert When the battery pack is very low , the phone is programmed to eliminate functions in or- der to save power . When Low Battery appears in the display and the phone is in standby , none of the keys will operate.
54 T roubleshooting Resetting the Handset Y ou may need to reset your handset in the following instances: Y ou lose a handset and purchase a new one. When you try and register to your existing base you get regis - tration failure. Y ou are unable to register any handsets to the base.
55 Resetting the Handset without the Base If your original base is not available for some reason (for example, it is lost or somehow incapacitated), you can still reset the handset and use it with another base. Press and hold [ ] and [#] for more than 5 seconds.
56 Common Issues If your phone is not performing to your expectations, please try these simple steps rst. If these steps do not solve your problem, please call our Customer Hotline. See back cover pag e for contact information. Symptom Suggestion The charge LED won’t illuminate when the handset is placed in the cradle.
57 Symptom Suggestion The Caller ID does not display . The call was placed through a switchboard. Call your telephone provider to verify your Caller ID service is current. There may be a problem with your Caller ID service. • • Y ou cannot register the handset at the base.
58 Liquid Damage Moisture and liquid can damage your cordless phone. Follow the suggestions below if your phone gets wet: Exterior If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.
59 Precautions! Before you read anything else, please observe the following: W arning! Uniden America Corporation DOES NOT represent this unit to b e waterproof. T o reduce the risk of re, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
60 Uniden works to reduce lead content in our PVC coated cords in our products and accessories. W arning! The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
61 The FCC W ants Y ou T o Know T h i s e q u i p m e n t c o m p l i e s w i t h Pa r t 68 of th e F C C r u l e s an d t h e requirements adopted by the ACT A. On the bottom of this equipment is a label that contains, among other information, a product identier in the format US:AAAEQ##TXXXX.
62 Radio Interference Radio interference may occasionally cause buzzing and humming in your cordless handset, or clicking noises in the base. This interference is caused by external sources such as TV , refrigerator , vacuum cleaner , uorescent lighting, or electrical storm.
63 One Y ear Limited W arranty Important: Evidence of original purchase is required for w a r r a n t y s e r v i c e . W A R R A N T O R : U N I D E N A M E R I C A CORPORA TION (“Uniden”) ELEMEN.
64 DirectLink.................................... 46 Do Not Disturb ............................ 45 E Earpiece V olume ........................ 42 Entering T ext from the Phone ..... 12 H Handset Banner.......................... 33 Hanging up ........
65 S Seven-Digit Dialing ..................... 50 Speaker V olume ......................... 42 Speed Dial .................................. 37 T T -coil... ........................................ 42 T alk and Standby T imes ............. 53 The FCC W ants Y ou T o Know .
66 At Uniden, we’ll take care of you! T h a n k y o u f o r p u r c h a s i n g a U n i d e n p r o d u c t . i f y o u h a v e a n y q u e s t i o n s o r p r o b l e m s , please do not return this product to the place of purchase. Having T rouble? Our customer care specialists are here to help you! Visit our website at www .
VISIT © 2005 Uniden Ame UPZZ01760BZ(0).
デバイスUniden TRU9465の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden TRU9465をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden TRU9465の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden TRU9465の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden TRU9465で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden TRU9465を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden TRU9465の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden TRU9465に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden TRU9465デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
