UnidenメーカーXCA550/55の使用説明書/サービス説明書
ページ先へ移動 of 36
Co nte nts Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Your Answering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Playing New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Import ant Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
Battery Safety Precautions Caution: To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: 1. Use only the appropriate type and size Battery Pack specified in this Operating Guide. 2. Do not dispose of the Battery Pack in a fire.
Introduct ion Congratulations on your purchase of the XCA550/55 telephone with an integrated digital answering system. This phone is designed to exacting standards to provide reliability, long life, and outstanding performance. This manual describes the operation of the XCA550 and the XCA555 models.
Included with the XC A550/55 If any of these items are missing or damaged, contact Uniden Customer Service at: (800) 297-1023, 8:00 am to 5:00 p.m. Central, Monday through Friday. Important Electr ical Considerations Unplug all electrical appliances when you know an electrical storm is approaching.
If you are having trouble with your telephone service, you must first disconnect your phone to determine if it is the cause of your problem. If you determine that it is the cause, you must leave it disconnected until the trouble has been corrected.
Installation Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and continuous power outlet. Note: A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.
Applying Power to the Bas e Unit The XCA550/55 phones require an AC outlet, without a switch to interrupt power, and the included AC adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, connect the adapter as shown below.
Desk or Tabletop Installation 1. Place the Base on a desk or tabletop. 2. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. 3. Place the AC Adapter cord around the strain relief. 4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit.
3. Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit. 4. Place the telephone cord inside the molded channel on the bottom of the Base Unit. Then plug the other end of the telephone cord into the modular jack on the wall.
4. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. 5. Place the cord inside the molded channel on the bottom of the Base Unit. 6. Place the Base Unit on the screws and push down until it’s firmly seated. 7. Plug the other end of the telephone line cord into the wall jack.
3. Put the retainer back into its slot on the Base Unit. 4. Push down on the Handset retainer until it snaps into place. 25 CHANNEL 25 CHANNEL XCA550/55 13 550CH1.
Sett i ng Up Yo ur Pho ne Extending the Antenna Before using your phone, be sure to raise its antenna to the vertical position. Then, fully extend the antenna. Installing the Handset Battery Pack 1. Press in on the Battery Cover Release. 2. Slide the battery compartment cover down.
Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month.
Low Battery Indicator When the Battery Pack in the Handset is very low and needs to be charged, the TALK/BATT LOW LED flashes. If the TALK/BATT LOW LED begins flashing, the phone is programmed to eliminate its functions to save power. The table below describes what to do to return your phone to normal operation.
Automatic Digital Code Security To avoid unauthorized calls on your phone, a Digital Code feature was added to the XCA550/55. This Digital Code is shared only between the Handset and Base Unit. The Code is set automatically when you first use the phone.
Using Your Phone Making and Receiving Calls The following features of the XCA550/55 phones are different depending on the Handset’s location when you make or receive a call. Handset On Base Handset Off Base Answer Call Pick up Handset. (AutoTalk) Press T .
Pro gra mm in g You r Pho n e All programming functions must be completed when your phone is in standby because programming keys will not work while you are on the phone.
Dialing a Stored Number To dial a number previously stored in memory, follow these steps: 1. Remove the Handset from the Base Unit. 2. Press T . 3. Press M .
T h eI n t e g r a t e dA n s w e r i n gS y s t e m The XCA550/55 has a built-in Answering System which answers incoming calls and records your messages.
4. Press skip/repeat until the current hour setting announces. You will see the hour (1–12) displayed. 5. Press clock . “The minute setting is announced.” 6. Press skip/repeat until the current minute setting announces. You will see the minutes (0–59) displayed.
Note: If you select 00 , then your PIN will be between 0 – 9. See “To set a PIN between 1 – 9" above. 3. Press pin again. 4. Press skip/repeat until the “ones” place of your PIN displays. For example, if you want 74 as your PIN , then press skip/repeat until 74 displays.
2. While your recorded outgoing message is playing, press ogm again. A tone will sound, and you hear one of the preset messages. After the message plays, and the Answering System automatically returns to Standby. Note: The message, “Hello. No one is available to take your call” is played if the r ec time ANN/4/1 is set to announce only.
Usi ng Y our Ans w eri ng Sys t em Playing New Messages 1. Press 6 to listen to your new messages when the new message counter is flashing. The time stamp is announced after each message plays, and the Message Counter LED displays the number of the message playing.
2. Press 3 at anytime to skip to the next message. Each time 3 is pressed, the system scans forward one message. If you have several messages, press 3 until you get to the message you want to play. 3. Press 6 at anytime to stop reviewing messages and return to Standby.
Leaving a Memo Message You can use the XCA550/55 to leave a Memo Message for someone else who uses your Answering System. To record a memo message, follow these steps: 1. Press and hold memo until you hear a long tone, and then release the key. Two begin flashing in the display.
Troubleshooting If your XCA550/55 Integrated Telephone Answering Device is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m.
Answering System Trouble shooting Chart Problem Suggestion Answering System does not work. • Make sure that the Base Unit is plugged in. • Make sure the Answering System is turned on. • Press the reset button to reset the system after an AC line spike.
Specifications General –T h e DXAI685 complies with FCC Rules, Parts 15 and 68. + Frequency Control P h a s e L o c k e d Lo o p (P L L ) S y n t he s i z e r Modulation FM Operating Temperature – 10 ° to 50 ° C Base Unit Receive Frequency 48.76 to 49.
XCA550/55 Telephone Answering Device NICAD.CHP Fri Aug 01 15:21:52 1997 Color profile: Disabled Composite Default screen.
Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Controls and Functions (Handset) 1. Talk Button T 2. Numeric Keypad 3. Tone Key O 4. Memory Key M 5. Ringer Volume V /Ringe r Key G 6. Talk/Batt Lo w Indicator 7.
Controls and Functions (Base) 1. Base Ringer Switch (XCA555 Only) 2. Pulse-Tone Switch 3. DC Power Jack 4. Telephone Line Jack 5. Handset Retain er 6. Status Indicato r 7. Message Delete Key 8. Speaker 9. Answering System On/Off Key 10. Message Counter LED 11.
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORA TION (“Uniden”) ELEMENTS OF WARRANT Y: Uniden warrants, for o.
©1997 Uniden America Corporation. All rights reserved. Printed in the Philippines. Cov ered under one or more of the f ollowing U .S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 ® 550CH4.
デバイスUniden XCA550/55の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden XCA550/55をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden XCA550/55の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden XCA550/55の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden XCA550/55で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden XCA550/55を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden XCA550/55の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden XCA550/55に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden XCA550/55デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
