UnitechメーカーPA982の使用説明書/サービス説明書
ページ先へ移動 of 47
unitec h P A982 Ultr a R ug ged Mobile Computer User ’ s Manual 400556G Rev . C.
.
i Pr eface About T h is Manual This manual explains how to insta ll, operate and main tain the P A982 Ultra Rugged Mobile Computer. No part of this publicatio n may be reproduced or used in any form, or by any elect rical or mechanical means, without permission in writing from the ma nufa cturer .
ii Laser Information The unitech P A982 series is ce rtified in the U.S. to conf orm to the requirement s of DHHS/CDRH 21CFR Subc hapter J and to the requirements of IEC 825-1.
About This Manual iii S torage and Safety Notice Although charged Li thium-Ion batteries may be left unused for several months, their capacity may be depleted due to build up of internal resi st ance. If this happens they will require recharging prior to use.
iv.
iii T able of Contents Preface About This Manual i Regulatory Compliance Statements ................. ................ ................... ................... ...... i FCC Statement .............. .................... ................... .............
iv Chapter 3 Getting Connected 19 Establishing Device-PC Connection ................. ................... ................... ................... 19 Installing Microsoft ActiveSync ... .................... ................... ....................... .
1 Chap ter 1 Getting Star ted Introducing the P A982 Thank you for purchasing t he P A982 Ultra Rugged Mobile Computer. Y our P A982 was designed for users needing a compact and durable port able computer for data collec- tion and real time transactions.
2 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Features Powerful system • Microsoft Windows CE 5.
Chapter 1 Getting Started 3 Package Content s After opening the box, ensure the following accessories for the P A982 are present : If anything is missing or appears dam aged in any way , contact your dealer .
4 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. A T our of the P A982 The following sections descr ibe the main components and features of the P A982. Front Lef t View No.
Chapter 1 Getting Started 5 Back V iew 7. Infrared (IR) port Uses infrared tec hnology to transmit and receive data from other IR-enabled devices. 8. Keypad Keypad interface for controlling the P A982. See Using the Harware on page 15 for more information.
6 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Setting up the P A982 This section explains how to install .
Chapter 1 Getting Started 7 1. Open the battery compartment by removing the four scr ews that secure the bat- tery compartment cover ( A ) and removing the cover ( B ).
8 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. 4. Place the battery pack into the battery bay and press the battery securely into the compartment. 5. Replace the battery compartment co ver and the four comp artment screws.
Chapter 1 Getting Started 9 Charging the Battery Before using the P A982 for th e first time, you n eed to charge it for about 16 hours. After that, you can charge the P A982 every day to recharge the battery to full capacity . Charge the P A982 using the synchronization power cable or th e docking st ation.
10 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. 2. Slide the device into the docking station unt il it clicks into place.
Chapter 1 Getting Started 11 Connecting the P A982 to a PC Use the synchroniza tion power cable to connect the P A982 to a PC to use with Active- Sync. 1. Connect the RS232 connector jack to the P A982 ( 1 ). 2. Plug the RS232 se rial connector into a serial port on the PC and connect the AC adapter into t he RS232 connector ( 2 ).
12 Calibrating the P A982 Screen The calibrate screen automa tically appears when the unit is powered- on for the first time or after the system is reset. There are 2 ways to calibrate the screen: A. Press Func Key + ESC Key . B. 1. T a p Start → Settings , tap the Control Panel tab 2.
Chapter 1 Getting Started 13 The S tylus Setti ngs window appears. This window enables you to calibrate the screen. 3. T ap Recalibrate to calibrate the screen. The align screen window appears. 4. T ap the cross hair firmly and accurately . The cross hair moves to the next location.
14 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Adjusting the Screen Brightness Adjust the screen bright n.
15 Chap ter 2 Using the Harware The following table descri bes the main keyp ad keys . Using the Alpha Ke y W hen t he P A982 b oo t s , t he de f aul t co nd i t io n is N ume r ic Mo de on . W hen you t oggle t o Alpha Mod e , t he de f aul t co ndi t ion i s CA PS m ode o ff .
16 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Using Hotkeys The P A982 provides eight combination hot ke ys to activate spec ified screen setting functions or programs.
Chapter 2 Using the Harware 17 Using the Laser Scanner The P A982 has an integrated lase r scanner which reads all ma jor bar code labels with excellent performance. NO TE: Reading software must be enabled in order to o perate the scanner . This can be a user-loaded application or a pre-loaded utilit y such as Scanner Setting or Scan2key .
18 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. 5. T ap Enable Scan. 6. T o perform auto scan, T ap To o l s → Auto Scan → S tart Auto- Scan 7. Choose Interval : 3 secs 8.
Chapter 2 Chapter 3 19 Chap ter 3 Getting Connected The unitech P A982 enables user s to link to a host computer using an RS-232, IrDA, or WLAN connection for data co mmunication.
20 4. Follow the instructions on the scr een to install Microsof t ActiveSync. Connecting the Device to Y our Computer 1. After ActiveSync has been inst alled, connect the P A982 to your PC as described in Connecting the P A982 to a PC on page 1 1. 2.
Chapter 2 Getting Connected 21 NO TE: Files created on your computer may need to be converted by Active- Sync so that they can be viewed an d edited on your device, and vice versa. T o copy files: 1. Connect your device to your computer . 2. In ActiveSync on your computer , click Explore .
22 Infrared Connection The infrared port allows you to synchronize information with an infrared enabled com- puter . Align the infrar ed port of your dev ice with the infrared port on the computer . This method is ideal for quickl y switching between multiple devices since there are no cables or adapt ers to change.
Chapter 2 Getting Connected 23 2. Perform the steps below on your device: a. Align the IR por t of your P A982 with the IR port on your computer so that they are unblocked and within close range. b. Initiate connection by tapping Start → Settings → Control Panel → PC Connection .
24 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. 2. T ap Star t → Settings → Control Panel → Bluetooth Device Properties. 3. T ab Scan Device . 4. Select a device fr om the list and select Tr u s t e d .
Chapter 2 Getting Connected 25 On the PC screen, you are prompted to enter the Bluet ooth PIN Code Request. 6. Enter the same Bluetooth PIN Code as you entered in step 4.
26 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. 9. On the P A600 tap S t art --> Program --> Bluetooth --> BT Activeysnc. 10. An icon appears on t he taskbar .
Chapter 2 Getting Connected 27 Inst alling the WLAN Card (Optional) Y ou can install an optional Wi reless Local Area Network (WLA N) Card in the P A982 to provide wireless networ k function. Follow these instructions. 1. Remove the two screws securing the WLAN compartment cover .
28 WiFi Connection Unitech terminals come with built-in RF facili ty .This chapter guides the user on how to setup the RF setting. 1. Double tap the Summit Client Utility . 2. Under “Main” tab, for Active Profile , select “ Third- PartyConfig ”.
Chapter 2 Getting Connected 29 4. T ap “OK”. 5. W arm S tart the terminal 6. Once the RF ca rd is detected, you will see the RF se tting window pop up. 7. T ap “Add New”(Or double t ap your preferred network) to add a new SSID. 8. Enter the SSID.
30 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Cha pter 4 Bar code Scanner Pr og r ams Scanner Settings W.
Chapter 2 31 Barcode Symbologies Note: *V alue Adjustab le Scanner Control Panel V3.0 Symbology Enable/ Disable Check Char/Digit v erification T ransmit Check Char/digit Max/ Min Length T ransmit Lead.
32 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Chapter 5 Advanced Settings Adjusting Settings This section describes how to adjust the settings of your device to accommodate your work habits.
Chapter 2 Advanced Settings 33 Checking the Main and Backup Battery S t atus This section describes how to view the power level for bo th the main and backup bat- tery . T o minimize power consum ption, you can define settin gs for the auto-off function and the processor ’ s operation speed.
34 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Extending Battery Life Y ou can extend the P A982 battery .
Chapter 2 Advanced Settings 35 Adjusting Backlight Setting The power consumption of the LCD backlight is high. T o co nserve battery power , turn off the backlight function if it is not necessary . T o change backlight settings: 1. T ap Start → Settings → Control Panel .
36 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Performing a Hardware Reset Y ou may have to perform a reset if the devic e freezes (i.e., device no longer responds to the buttons on the screen) .
Chapter 2 Advanced Settings 37 Performing a Cold Boot A cold boot cuts of f power to your device, erasing all records and entries, deleting all programs you have added, an d restoring the device to default factory settings. Never perform a cold boot un less a soft reset does not correct your problem.
38 Copyright 2006 unit ech Elec tronics Co., Ltd. All right s reserved . unite ch is a registered trademark of unitech Electronics Co. , Ltd. Remove the PCMCIA bay cover an d press the wh ite hardware reset button inside the PCMCIA bay with the tip of a screwdriver .
Chapter 2 System Specifications 39 A ppendix System Specifica tions Processing/Memory CPU Intel Xscale PXA255 400Mhz Memory SDRAM: 64 MB Flash ROM: 64 MB OS Microsoft Windows CE 5.
デバイスUnitech PA982の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Unitech PA982をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUnitech PA982の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Unitech PA982の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Unitech PA982で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Unitech PA982を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUnitech PA982の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Unitech PA982に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUnitech PA982デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。