United Digital TechnologiesメーカーKCM-8111の使用説明書/サービス説明書
ページ先へ移動 of 41
K CM - 81 1 1 2M Indoor PTZ with D/N, Advanced WDR, SLLS,18x Zoom lens (DC 12V / High PoE) Hard w are Manual V er . 2013/ 06 /28.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 2 T able of Conte nts Precautions 3 Safety Instructions ........................................................................... 5 Introduction 7 Package Contents ....................................
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 3 Precautions Read these instructio ns Y ou should rea d all the saf ety and operati ng instructions before using t hi s produc t. Heed all warnings Y ou m ust adhere to all the warnings on the prod uct and in the instruction m an ual.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 4 Federal Communic ations Commission Statement This equipm ent has been tested and f ound to com ply with the lim its for a class B digital device , pursuant to Part 15 of the FCC Rules.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 5 Safety Instructions Don’t use the pow er suppl y with other voltages This device is lik ely to be dam aged or damage other e quipments / personne l, if you use a power suppl y with different voltage than the one inc luded with this device.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 6 4) If the video product d oes not operate norm ally b y following the operating I nstructions in this manual.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 7 In troduction Package Contents Camera Power Adaptor Universal Plug Con verter Surface Mount Mounting Scre w Kit Fixing Bracket Drill Template Term in.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 8 Physical Description Connectors View 1) Micro SDHC Card Slot Insert a Micro SD HC card here f or local recordi ng on cam era . 2) Digital Input / Output (DI/DO) This connector conn ects to digital inpu t or output devices , such as an alarm trigger , panic button, etc.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 9 Internal Vie w 1) Power Button The Power Button is used in case there is a need restart the cam era. T o restart the cam era, press the Power Button using a po inted object, suc h as a pen . 2) Power LED The Power LED lights re d when the cam era is power ed up.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 10 Before Installa tion Unpack ing the Camera 1. Remove the plastic co ver . 2. Rotate the cam era cover counter -clock wise to remove it.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 11 4. Rotate the cam era cover clock wise to attach it. Preparing the Power A d aptor The camera consum es 19.2 W power when powered by a Power over Ethernet (P oE) switch that is IEEE802.3at c ompliant.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 12 2. T ake note that the po wer adaptor cable h as two (2) different wires: 3. Connect the wire with the white stripe to the 1 2V pin an d the other to the GND p in. 4. Ti ghten the screws of the 1 2V pin and the G ND pins to secure the wire connect ion.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 13 Preparing the DI/DO Connector Depending on your surveillance needs, you m ay connec t digital input or output devices to your camera to trigger events or notifications. Digital Input (DI) devices c an be used to notif y the camera about an activit y in the camera site.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 14 T o connect output devices (DO) , map the pins to one o f the pin com binations belo w: Device Pin Mapping Instructions Digital Output 1 (D O 1) 2 12V Connect the wires of the first output device to 12 V (Pin 2) and DO1 ( Pin 4).
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 15 High Voltage DO Device Connection Even though the cam era provides 12V po wer, this m ay not be enough for s ome hig h voltag e DO devices, such as a ceiling light or a motor that opens or closes a gate.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 16 Installation Procedures There are several m ounting opt ions that you can use to install the cam era. Select t he most suitable solution for your installation environm ent. Mounting Solutions Mount T ypes Accessories Surface Mount Suitable when m ounting the cam era on hard or dropped cei lings.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 17 Straight Wall Mount PMAX-01 10 PMAX -0305 (Heavy Dut y Wall Mount) PMAX-01 10 PMAX -0302 (Gooseneck with Brack et) PMAX-01 10 PMAX -0303 (Gooseneck ) V ertical Po le Mount Suitable when m ounting the c amera on vert ical poles.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 18 Corner Mount Suitable when m ounting the c amera on a corner wall. PMAX-01 10 PMAX-0303 PMAX- 0402 PMAX-01 10 PMAX -0305 PMAX- 0402 Other Mounting A.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 19 Mounting on the Ceiling There are three m ounting solutions that you can do to mount the cam era on the ceiling: Surface Mo unt : T o install the camera directl y on the ceiling. Accessories com e bundled with the cam era pack age.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 20 4. Align and attach th e fixing brac ket to one of the h oles on the cam era using the supplied screw (holes m arked belo w). The fixing bracket will fix the cam era position when mounted later . 5. Align and insert the c amera base h ooks to the m ounting holes of the m etal plate.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 21 7. Ti ghten the screw on th e fixing brack et to fix the cam era position. This is to avoid accidental camera m ovem ent as the camera perf orms PTZ f unctions. 8. Connect the network cable , power adaptor a nd an y other cable connectio ns (such as DI/DO, audio in, etc .
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 22 Using the Flush Mount Use the Flush Mount when installing the cam era on a d ropped ceiling; there is space above the ceiling where the cam era body can be hidden from view and onl y the dome cover can be seen underneath th e ceiling.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 23 Step 2: Prepare t he Flush M ount 1. Push to detach the co ver ring from the m ount as marked belo w . Then set the cover ring aside. 2. Pee l off the lining of the three (3) f oam rubber pads and attach a ru bber pad to ea ch retaining brack et.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 24 Step 4: Install the M ount 1. Insert the m etal bracket through the hole until the r ing edge is f lat on the ceil ing.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 25 3. Ti ghten the screws to secur e the m ount and m ake sure the network cable, power adaptor , and other cables (if necessar y) are routed on the outer ga p of the m etal bracket . 4. Attach the fixing bracket to one of the holes on the cam era using the supplied screw (holes mark ed below).
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 26 Step 5: Connect the Cabl es and O ptional A ccessor ies Insert a microSDHC c ard into the cam era card slot (if nec essary) . Connect the network cable , power adaptor, a nd other c ables, such as DI/ DO, etc.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 27 2. Slide the camera clockwise to secure the hooks to the m ount. Noti ce that the fixing bracket screw becom es aligned with the ho le on the m etal bracket 3. Ti ghten the screw on th e fixing brack et to fix the cam era position.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 28 Using the Pendant Mount In case of high ceilings, the camera can be lowered by pendant mount. NOTE: The Pendant Mount is not included in the cam era pack age.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 29 3. Install the straight tub e on the ceiling. NOTE: If the straight tube i s not l ong enough, you may use one or more extension tubes (purchased separately). Step 2 : Install the M ount Kit (PM AX-0110) 1.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 30 3. T wi st the m ount kit to align the sc rew holes and attach the two (2) mounting sc rews (included in the m ount kit p ackage). Step 3: Install the Came ra 1. Connect the network cable to the Ethern et port of the c am era.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 31 3. Slide the camera c ounter-c lockwise to secure the ho oks to the mount. 4. On the top of the m ount k it, attach three (3) sc rews (included in th e m ount kit pack age) to secure the cam era to the mount.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 32 Mounting on Straight W all There are four (4) mounting sol utions that you can do to mount the camera on the s traight wall . The L-T ype Wall Mount is used to inst all the cam era facing do wn as if it is ins talled on a ceiling (s ee below f or mounting instructions ).
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 33 2b. If the cable wi ll go along t he wall , rem o v e the pre -cu t tab on the L- type wall mount using pliers .
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 34 2. Align and insert the c amera base h ooks to the m ounting holes. 3. Slide the camera c lockwise to secure t he hooks to the m ount. 4. Attach three (3) sc rews (included in the L-t ype wall m ount package) to secure th e camera to the mount.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 35 Other Straight W all Mount ing Solutions Other straight wall mounting solutions include the following combinations : Heavy Dut y Mount Kits ( PM.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 36 Accessing Camera Configure the IP A dd resses In order to be able to communicate with the camera from y o ur PC, both the camera and the PC hav e to be wit hin th e s ame network segment.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 37 W hen the lef t m ouse is click ed on the c amera m odel name , the default browser of the PC is automatically launch ed and the IP address of the target cam era is a lready filled in the addres s bar of the browser .
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 38 Use the default I P addres s of the camera If there is no DHCP server i n the given net work, the user m a y have to m anually assign the I P addresses to both the PC and th e cam era to make s ure they are in the sam e network segment.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 39 Manually adjust the I P addresses of multiple cam eras If there are m ore than one cam era to b e used in the sam e local are a n etwork and there is no DHCP server t o assign un ique IP addresses to eac h of them , all of the cam eras would then have the i nitial IP addres s of 192.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 40 A ccess the C amera Now that the camera and the PC both have their unique IP addresses and are under the same network segm ent, you can use Microsof t Internet Explorer on the PC to acc ess the cam era.
w w w .a ct i. co m KCM - 81 11 Hardw are Manual 41 Upon successf ul connection to the camera, the user i nterface c alled Web Configurator would appear together with the login page.
デバイスUnited Digital Technologies KCM-8111の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
United Digital Technologies KCM-8111をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUnited Digital Technologies KCM-8111の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。United Digital Technologies KCM-8111の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。United Digital Technologies KCM-8111で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
United Digital Technologies KCM-8111を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUnited Digital Technologies KCM-8111の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、United Digital Technologies KCM-8111に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUnited Digital Technologies KCM-8111デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
