VerbatimメーカーVM-01の使用説明書/サービス説明書
ページ先へ移動 of 35
Store ‘n’ Play MP3 PLA YER USER MANUAL VM-01.
1 FCC notice ........................................................................................................ 3 Handling precaution .......................................................................................... 4 Product features .
2 Play mode ....................................................................................................... 23 System setting ................................................................................................ 24 Sleep ...........
3 FCC Notice FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 Handling Precaution Before using this device, please carefully read and understand the safety instructions listed below . 1. Read carefully all the attached user ’ s materials, and fully understand the operation guide and warnings of this device. 2.
5 6. Do not subject the device to drops or hard impacts which may lead to damage. 7. The device should be opened under no circumstances. The manufacturer takes no liability for damages resulting from unauthorized tampering.
6 Product Featur es - Supports WMA and MP3 le formats - Bit rates supported 32kbps - 320kbps constant & variable - W indows Media DRM 9 support - Negative LCD Display with LED back light - ID3 .
7 Package Contents 1. Store ‘n’ Play MP3 Player VM-01 (x1) 2. Stereo Earphones 3. USB Extension Cable 4. AAA Battery 5. Carry Strap 6. Quick Start Guide 7.
8 Product Diagrams and Function Buttons 1 2 Pr oduct diagrams and function buttons Earphone jack Play/pause button A-B Repeat section V olume + V olume - Lock button MIC jack Fast forward button Menu .
9 Product Diagrams and Function Buttons 1 3 Operating method Battery installation Product diagrams and function buttons.
10 Product Diagrams and Function Buttons.
11 Product Diagrams and Function Buttons.
12 Connecting to the Computer Computer system requirement 1. Microsoft W indows 98SE/Me/2000/XP 2. CD-ROM drive 3. Pentium CPU above 233MHz 4. W ith RAM memory above 32MB(if the operating system is W indows XP , the RAM should be above 64MB) 5. Hard disk space should be above 20MB 6.
13 USB Connection Display This player is a mass storage device. It does not need driver installation for PC connection. However for windows 98SE OS you need to install the driver . The driver is contained on the enclosed CD or download the driver from the following website: www .
14 File Upload and Download After the device is connected to the computer to upload/download les, no special operation other than simple “drag-drop” is needed. 1. Double click “my computer” in W indows, you will nd a new icon “removable disk”, which represents your digital audio player 2.
15 Shuttin g downÖ An Introduction to Basic Functions Power on/off Power on Press “play/pause” button to start the device Start gure The following picture (gure) has been set in the device before it left factory . Power off 1. Long press “play” button, the device will be shut down, as the progress bar displayed below .
16 An Introduction to Basic Functions V olume setting Adjust the volume by using “VOL+”and” VOL-” on the main device 1. V olume can be selected among 0-10 sections. 2. Press the button to adjust the volume section by section; long press on the button to adjust the volume continuously .
17 An Introduction to Basic Functions Mode menu setting Music (music mode), voice (voice mode) or exit (keep the mode selected before) are available. menu setting in music mode menu setting in voice m.
18 An Introduction to Basic Functions Lock function When switching on “HOLD” lock button, all the functions cannot be operated. Switch on the device when it is shut down, “locked” will be displayed. When it is playing, there will be an icon of “locked” on the upper right of LCD.
19 An Introduction to Basic Functions V oice record In voice mode, you can record voice via the built-in Mic 1) Press “Rec/A-B” button to begin recording 2) Press “Rec/A-B” button again to stop recording 3) Recorded les are stored as default les VXXX.
20 An Introduction to Additional Functions Repeat section (A-B) When music le or voice le is being played, press REC/A-B button to set the start point (point A) for repetition, and press REC/A-B button again to set the ending point (point B). The device will begin repeat the section.
21 File Management Delete 1. Press “MENU” button to enter function menu, Select “Delete” with “fast forward” button or “fast backward” button.
22 Firmware Upgrade Firmware upgrade le and upgrade procedures are available from the below websites: www .verbatim-europe.com www .verbatim.com Y ou are recommended to check the availability of new rmware release versions to perform upgrades periodically to enhance the performance of the player .
23 Play Mode Normal: play all the music les one by one and stop Repeat one: play the current music le, and repeat playing it Repeat all: play all music les one by one, and repeat them all Ran.
24 System Setting System setting selection menu In the modes of music or voice, the following system settings are included. Sleep T o preset auto sleep time. The device will shut down automatically and accordingly after the selected minutes. “Off, 15, 30, 45, 60” minutes are available.
25 System Setting Resume If the sleep memory is set to “YES” , the status information will be recorded when the player is shut down. When it starts again, the player resumes to the status last tim.
26 System Setting Contrast T o set the contrast of LCD, totally 10 grades: “1,2,3,4,5,6,7,8,9,10” are available. Y ou can also select “exit” to keep the original settings. Backlight time T o set the time of LCD backlight for each operation, “off, 10 seconds, 30 seconds, 60 seconds, permanent” are available.
27 System Setting User Interface Languages: English, France, Spanish, Portuguese, German, Italy are available..
28 System Setting Restore default setting If selecting “yes”, the MP3 player will resume the default setting. If selecting “no”, or “exit”, the player keeps the current setting. V ersion It is used to display the version of the rmware of the device.
29 Appendix A list of menus MENU Play mode EQ Delete Setting Normal Repeat o ne Repeat a ll Random Repeat r andon Normal Rock Jazz Classic Pop User Sleep Resume Scrolling speed backlight time version .
30 T rouble Shooting 1. The device fails to work or LCD does not display . 1) Check if there is enough battery power . 2) Check if the polarities of battery are correct. 2. The device does not respond to button press. 1) Check if the “hold” button is in “ON” position.
31 7. How to r estore the default setting of the player . 1) Select “restore default setting” in the system setting of the device, and select “yes” to restore the default setting. 8. LCD backlight is not on. 1) Check if the backlight setting in the system setting of the device is set in “OFF” position.
32 SpecicationofProduct Notes: The above-mentioned specications of digital audio player are subject to further modication for the purpose of performance upgrading without special Notes.
33 T echnical Support Europe: For technical support in Europe e-mail drivesupport@verbatim-europe.com or call 00 800 3883 2222 in the following countries: Austria, Belgium, Denmark, Finland, France, Germany , Hungary , Italy , Luxembourg, Monaco, Netherlands, Norway , Poland, Portugal, Republic of Ireland, Spain, Sweden and Switzerland.
34 T echnical Support does not apply to normal wear or to damage resulting from abnormal use, misuse, abuse, neglect or accident or to any incompatibility or poor performance due to the specic computer software or hardware used.
デバイスVerbatim VM-01の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Verbatim VM-01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVerbatim VM-01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Verbatim VM-01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Verbatim VM-01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Verbatim VM-01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVerbatim VM-01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Verbatim VM-01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVerbatim VM-01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
