VidikronメーカーVP-6500VHDの使用説明書/サービス説明書
ページ先へ移動 of 70
HIGH DEFINITION PLASMA DISPLAYS Models VP-6500VHD and VP-6500VHDa VERSION 1.0 OWNER’S OPERA TING MANU AL.
.
Vidikron PlasmaView Ow ner’s Operating Manual iii PRE L IMINAR Y THREE YEAR LIMITED WARRANTY For Plasma Displays Congratulations on y our purchase of a Vidikro n video product an d welcome to the Vidikron family ! With proper installation, se tu p and care, y ou should enjoy many years of unparallel ed video performance .
iv Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y CAUTION: THIS LIMITED WARRANTY O NLY COVERS VIDIKRON PRODUCTS PURCHASED FROM V IDIKRON AUTHORIZED DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVE RAGE UNDER THIS WARRANTY.
Vidikron PlasmaView Owner’s Operating Manual v PRE L IMINAR Y To locate the name and address of the ne arest Vidikron Authoriz ed Service Center, or for additi onal information about this Limi ted W.
vi Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchase of this quality Vidikron video product! It has be en designed to provide yo u wit h the quality of vid eo that is expected in a home theater. For th e best performance, please read this manual carefully as it is your guide through the menus and operation.
Vidikron PlasmaView Owne r’s Operating Manual vii 1 Table of Contents PRE L IMINAR Y THREE YEAR LIMITE D WARRANTY ................ ............. ................ ................ ............. ................ iii Safety Precautions ................
Table of Contents viii Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Connection s to the Plas maView and VH D Controlle r ................... .......... ............ ............. .......... ........ 19 Connecting the Plasma View to the VH D Controlle r .
Vidikron PlasmaView Owne r’s Operating Manual ix PRE L IMINAR Y 1 List of Figures 2-1. PlasmaView F ront-Panel Co ntrols and Indicato rs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. Plasma View Rear Panel .
List of Figures x Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron PlasmaView Owner’s Operating Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual de scribes how to install, set up and op e rate the Vidikron Pla smaView High-Definition Plasma Display (M odel VP-6500VHD or VP-6500VHDa).
Introduction 2 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Graphic Conv entions: These symbols appear in numerous plac es throughout the manual , to emphasize points tha t you must keep in mi nd to avoid problems with y our equipment or injury: 1.
Introduction Vidikron PlasmaView Owner’s Operating Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The new Vidikron VP-6500VHD plasma mo nitor establishes a higher thresh old for flat panel display products. This is our largest and highest-resolution plasma ever, at 65 inches diagonal and 1920 x 1080 (108 0p) native resolution .
Introduction 4 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Parts List Your PlasmaView is shipped with th e following ite ms. If any items are missing or damaged, please contact your Vidikron deal er or Vi dikron Customer Servic e at (888) 4VIDIKRON.
Vidikron PlasmaView Owner’s Operating Manual 5 PRE L IMINAR Y 2.1 PlasmaView at a Glance Controls and Indicators Figure 2-1 shows th e PlasmaView front- panel controls a nd indicators. Figure 2-1. PlasmaView Front-Panel Controls and Indicators 1. DISPLA Y ST AND Optional accessory for table-top installations.
Controls and Functions 6 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Connecto rs Figure 2-2 show s the rear-panel co nnector loca tions on the Pl asmaView. Figure 2-2. PlasmaView Rear Panel 1. SL O T 1 Not used. 2. SL O T 2 (DVI-D input) HDCP-compliant digital video input.
Controls and Functions Vidikron PlasmaView Owner’s Operating Manual 7 PRE L IMINAR Y 2.2 VHD Controller Front Panel Figure 2-3 shows th e controls and indicato rs on the VHD Controller front panel; the paragraphs that follow describe them. Figure 2-3.
Controls and Functions 8 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y 2.3 VHD Controller Rear Panel Figure 2-4 show s the rear co nnector panel on the VHD Contro ller. Figure 2-4. VHD Controller Rear Panel Outputs 1. HDMI OUT Connect this to the SLOT 2 (DVI- D ) i nput on the PlasmaView (see Figure 2-2 ).
Controls and Functions Vidikron PlasmaView Owner’s Operating Manual 9 PRE L IMINAR Y 8. ComL ink (RS-232) OUTPU T Connect this to the ComLink (RS-232) input on the projector, using the provided communication cable. 9. IR Wired input from a wired remote control or in frared receiver.
Controls and Functions 10 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y 2.4 VHD Controller Remote Control Figure 2-5 shows the VHD C ontroller remote c ontrol, and the pa ragraphs that follow de scribe its functionality.
Controls and Functions Vidikron PlasmaView Owner’s Operating Manual 11 PRE L IMINAR Y 1. IR OUTPUT INDICA T OR Lights when a button is pressed to indicate that a n IR signal is being transmitted. 2. LIGHT Press to illuminate the buttons. 3. ON / OFF Press to turn the pr ojector on or off.
Controls and Functions 12 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Memory Preset Buttons: 8. ISF NT (Night) Press to recall settings for the current in put from the “ISF Nig ht” memory preset. 9. ISF DA Y Press to recall settings for the current input from the “ISF Day” memory preset.
Vidikron PlasmaView Owner’s Operating Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote control: 1. Press down the tab o n the cover a nd pull the cover in the direction of the a rrow. 2. Insert the included batteries. Ensure that the polarities correct ly match the and markings inside the battery compartment.
Installation 14 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y • Do not drop the remote co ntrol or expo se it to moisture or high temperature. • The remote c ontrol ma y malfun ction under a fl uorescent lamp. If that o ccurs, move the plasma display away from the fluorescent lamp.
Installation Vidikron PlasmaView Owner’s Operating Manual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the Plasma View installation pr ocess. The sections following this one provid e detailed instructions. Installation should be performed by a qualified custom video installation specia list.
Installation 16 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of yo ur PlasmaView will ensure the highest possi ble picture quality.
Installation Vidikron PlasmaView Owner’s Operating Manual 17 PRE L IMINAR Y • As it lies flat with the screen face down. Place the protective sh eet, which was wrapped a round the plasma monitor when it was packaged, between the screen and your work surface to avoid scratching or other wise damaging the screen surface.
Installation 18 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Other Considerations Other considerations a nd tips that can he lp improve your installa tion, avoid damage an d prolong operatin g life: • Keep the ambient tem perature con stant and below 35 °C (95°F).
Installation Vidikron PlasmaView Owner’s Operating Manual 19 PRE L IMINAR Y 3.4 Connections to the PlasmaView and VHD Controller Proceed as follows to connect the PlasmaView to the VHD Controller, your video sources, external control ler(s) – if present – an d AC power.
Installation 20 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Digital Video Connection: The PlasmaVie w has a DVI input, labeled DV I-D IN ( SL OT 2) . Connect the HDMI o utput from the VHD Controller to this in put, using a DVI-to-HDMI cable or a DVI cable with a DVI-to-HDMI adapter.
Installation Vidikron PlasmaView Owner’s Operating Manual 21 PRE L IMINAR Y Connecting Source Components to the VHD Controller Connect your video sour ces to the VH D Controller as sh own and described in th e sections that follow. HDMI Connections: See Figure 3-5.
Installation 22 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Digital (DTV) R GB Connections: See Figure 3-6. Figure 3-6. Digital (DTV) RGB Connections HD1 HD2 G/Y INPUTS HV R/Pr B/Pb .
Installation Vidikron PlasmaView Owner’s Operating Manual 23 PRE L IMINAR Y Analog (Computer) R GB Connections: See Figure 3-7. Figure 3-7. Analog RGB Connections 1. Refer to PlasmaWall Specifications on page 55 for a list of computer signals compatible with the PlasmaView.
Installation 24 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Composite/S-Video/Compon ent Video Connections: See Figure 3-8. Figure 3-8.
Installation Vidikron PlasmaView Owner’s Operating Manual 25 PRE L IMINAR Y RS-232 Controller Connection Use a standard, 9-pin RS-2 32 cable to connec t a PC or home theate r control/automation system (if present) to the RS-232 Co ntrol po rt on the VHD C ontroller; se e Figure 3-9 .
Installation 26 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Connecting an External IR Receiver to the VHD Controller If infrared signals from the remote control cannot reac h the VHD.
Vidikron PlasmaView Owner’s Operating Manual 27 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source compo nents. 2. Plug the female en d of the power cord into the AC receptacle on the rear of the PlasmaView. Connec t the other end to your AC power source.
Operation 28 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y 4.2 Setting the Computer Display Properties To maximize image quality when using the Plas maView with a person al computer, you may need to adjust the display properties of yo ur computer’s video card.
Operation Vidikron PlasmaView Owner’s Operating Manual 29 PRE L IMINAR Y 4.3 Using the VHD Controller Menus Press the MENU button on either the remote cont rol or the VHD Controller front panel to display the Main Menu.
Operation 30 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Figure 4-1. VHD Controller OSD Menu Structure for PlasmaView Service Test Video Grey Bars 1 Grey Bars 2 Color Bars 1 Color Ba.
Operation Vidikron PlasmaView Owner’s Operating Manual 31 PRE L IMINAR Y Main Menu The Main Menu is the starting poin t for accessing all display functions. (The Calibration and Service men us are hidden and not accessible until you enter a passcode.
Operation 32 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description 16:9 16:9 Select 16:9 to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 screen.
Operation Vidikron PlasmaView Owner’s Operating Manual 33 PRE L IMINAR Y Picture Use the control s in the Pict ure Menu to calibrate the analog inputs on the PlasmaView for optimum picture quality. The PlasmaView has been designed to in corporate setup and ca libration standards established by the Imaging Science Foundation (ISF).
Operation 34 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y PLUGE patterns vary but generally consist of some combinatio n of black, white and gray areas against a black background. The example abov e includes two vertical bars and four shaded boxes.
Operation Vidikron PlasmaView Owner’s Operating Manual 35 PRE L IMINAR Y Color Saturation: On your external test pattern source, select a color bar pa ttern like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adjusting Co lor Saturation and Tint Select Color and press ENTER .
Operation 36 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Sharpness: “Sharpness” is the amount of high-frequency deta il in the image. To adjust sharpness, select Sh arpness from the Picture menu and press ENTER . On your external test pattern source , select a pat tern like the on e shown in Figure 4-5 .
Operation Vidikron PlasmaView Owner’s Operating Manual 37 PRE L IMINAR Y Overscan: Ima ge Overscan pushes the outside edge of th e active picture area of th e video signal out beyond the edge of the display area .
Operation 38 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Calibration Use the Cali bration menu to perform adva nced picture quality adjustments on the analog inputs.
Operation Vidikron PlasmaView Owner’s Operating Manual 39 PRE L IMINAR Y ISF Night - Input Color: The Input Color contro ls are similar to those in the Display Col or menu (see above ), but adjust the col or balance at the VHD Controller (a s opposed to the display device).
Operation 40 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y • V idikron/ISF Logo Splash Screen T imers: When you turn on the PlasmaView, it projects a welcome screen with th e Vidikron logo followed by one with the ISF logo. Select Splash Timer from the Splash Configure menu to set the amount of time that these two images appear.
Operation Vidikron PlasmaView Owner’s Operating Manual 41 PRE L IMINAR Y • You have multiple VHD C ontrollers and wan t to control them independently, as oppo sed to broadcasting commands from a singl e remote to all of them. In this scenario, you can use multiple remotes programmed to use differ ent IR codes.
Operation 42 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y • Display Image (1080i digital and 1080p si gnals ONLY): Select Display Image from the Display Device menu to perform th e following displa y device adjustments.
Operation Vidikron PlasmaView Owner’s Operating Manual 43 PRE L IMINAR Y Miscellaneous: Select Miscellaneous from the Service menu to set the fo llowing options: • Language: Select Language from the Miscellaneou s menu and press th e up- or down-arrows to select the OSD language.
Operation 44 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron PlasmaView Owner’s Operating Manual 45 PRE L IMINAR Y 5.1 Cleaning Regular cleaning wi ll extend the life and perfor mance of the PlasmaView.
Maintenance and Troubleshooting 46 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provides some ge neral guidelines for t roubleshooting problems you may encounter with the PlasmaView .
Maintenance and Troubleshooting Vidikron PlasmaView Owner’s Operating Manual 47 PRE L IMINAR Y RGB-HD images appear “noisy.” • Clock and Phase settings need adjustment. • Adj ust Clock and Phase settings (refer to ISF Night - Input Color on page 39 ).
Maintenance and Troubleshooting 48 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Notes:.
Vidikron PlasmaView Owner’s Operating Manual 49 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the PlasmaView wi th a home theater automation/con trol system or a PC running terminal emulation software, conn ect it to the RS-232 output of the VHD Contr oller as shown in Figure 3-3 .
Serial Communications 50 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Table 6-1 lists th e RS-232 command set. The “Parameter (min/max)” column shows the val id parameter ranges, or “NA” for co mmands that take no parameters.
Serial Communications Vidikron PlasmaView Owner’s Operating Manual 51 PRE L IMINAR Y Picture Adjust Commands (not available on HDMI 1 or HDMI 2 inputs) BRIGHTNESS -100/100 YES Sets a value for brigh.
Serial Communications 52 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Input Position Commands (not available on HDMI 1 or HDMI 2 inputs) IHEIGHT -100/100 YES Sets the value for input .
Serial Communications Vidikron PlasmaView Owner’s Operating Manual 53 PRE L IMINAR Y Miscellaneous Commands (not available on HDMI 1 or HDMI 2 inputs) BKGND -100/100 YES Sets the background colo r f.
Serial Communications 54 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y The following serial commands are meant to em ulate buttons on the remote control or VHD Controller front panel. Each button has its own seri al command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands.
Vidikron PlasmaView Owner’s Operating Manual 55 PRE L IMINAR Y 7.1 PlasmaView Specifications Table 7-1 lists the PlasmaView specifications. 7 Specifications Table 7-1. PlasmaView Specifica tions Native Resolution: 1920 x 1080 Screen Size: 56.50 in. W x 31.
Specifications 56 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y 7.2 VHD Controller Specifications Table 7-2 lists th e VHD Controller specifica tions.
Specifications Vidikron PlasmaView Owner’s Operating Manual 57 PRE L IMINAR Y 7.3 PlasmaView Dimensions Figure 7-1 shows th e PlasmaView dimension s (all dimensions are in inches). Figure 7-1. PlasmaView Mo del VP-6500VHD Dimensions (with Optional Table Stand) 0 2.
Specifications 58 Vidikron PlasmaView Owner’s Operating Manual PRE L IMINAR Y Notes:.
.
Vidikron 2900 F aber Street Union City , CA 945 8 7 510-324-5900 F ax 510-324-5905 1- 888 -4-VIDIKRON www.vidikron.com SERIAL NUMBER RUMA-009830 rev. 01-25-07 v1.
デバイスVidikron VP-6500VHDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Vidikron VP-6500VHDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVidikron VP-6500VHDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Vidikron VP-6500VHDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Vidikron VP-6500VHDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Vidikron VP-6500VHDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVidikron VP-6500VHDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Vidikron VP-6500VHDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVidikron VP-6500VHDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
