ViewZメーカーVZ-17RTAの使用説明書/サービス説明書
ページ先へ移動 of 28
17/19-INCH VALUE TFT -LCD MONITOR INSTRUCT ION MANUA L Please read this manual thoroughly before use, a nd keep it handy for future re ference..
.
SAFETY INSTRUCTION ………………………………………………………………… .. 2 ~ 3 CAUTIONS ……………………………………………………………… .......................... 4 FCC RF INTERFERENCE STATEMENT …………………………… .
Important Safet y Instruction 1. Read these instru ctions. 2. Keep these Instru ctions. 3. Heed all w arnings. 4. Follow al l instructions. 5. Do not use this appa ratus near w ater . 6. Clean only with dry cloth. 7. Do not block any ventilation open ings.
- The apparatus sha ll not be expo sed to drippi ng or splashing and tha t no objects filled with liquids, such as vases, shall be place d no the apparatus .
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
NOTE This e quipment has been tested and f ound to comp ly with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation.
A. BOTTOM P A NEL CONTROL 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7, 8.
B. REMOTE CONT ROLLER (Option) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode.
C. FRONT KEY C ONTROL 1. SOURCE / Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display . This button can also be used to move previous menu or status. 3, 4. AUTO/ ▼, ▲ Th ese buttons allow user to move the sub -menu of the activated function.
OSD MENU DESCRIP TION A: PICTUR E MENU (for AV1 & AV2 i nput ) 1) Press the MENU button. 2) Press the up (▲) or dow n(▼) button to select the PICTURE . 3 ) Press the up(▲) or down(▼) button to select the PICTURE sub menu. 4 ) Press the left( ◀ ) or right( ▶ ) button to adjust the sub menu sett ing .
B. SOUND MENU 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the SOUND . 1. VOLUME 1) Press the right( ▶ ) or enter button 2) Press the up(▲) or down(▼) button to select the Volu me. 3) Press the left( ◀ ) or right( ▶ ) button to adjust the Volume.
2 . Mute 1) Press the up(▲) or down(▼) button to select the MUTE. 2) Press the left( ◀ ) or right( ▶ ) button to select the ON or OFF. INSTRUCTION MANUAL ………………… ………………………………………………….
C. PC MENU(for P C input) 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the PC. 1. CONTRAST & BRIGHTNESS 1) Press the up(▲) or down(▼) button to select the C ONTRAST and BRIGHTNESS. 2) Press the left( ◀ ) or right( ▶ ) button to adjust the CONTRAST and BRIGHTNESS Setting.
2. H. POSITION, V. POSITION, CLOCK & PHASE 1) Press the up(▲) or down(▼) button to select the PC sub Menu. 2) Press the left( ◀ ) or right( ▶ ) button to adjust the PC image setting. • H. POSITION : Move image horizontally on screen right or left.
3. COLOR MODE 1) Press the up(▲) or down(▼) button to select the COLOR MODE . 2) Press the right( ▶ ) or enter button. 3-1. AUTO COLOR 1) Press the up(▲) or down(▼) button to select the AUTO COLOR. 2) Press the right( ▶ ) or enter button. • AUTO COLOR : Auto color geometry adjustment.
3-2. COLOR TEMP 1) Press the up(▲) or down(▼) button to select the COLOR TEMP. 2) Press left( ◀ ) or right( ▶ ) button to select the color temp mode. 3-3 COLOR TEMP - USER 1) Press lef t( ◀ ) or right( ▶ ) button to select the USER in the COLOR TEMP.
D . SETUP MENU 1) Press the up(▲) or down(▼) button to select the SETUP. 2) Press the right( ▶ ) or enter button. 1. LANGUAGE 1) Press the left( ◀ ) or right( ▶ ) button to select the OSD language. 16 …………………………………………………………………….
2 . H. POSITION, V. POSITION, OSD TIMER, TRA NSP ARENT(for OSD control) 1) Press the up(▲) or down(▼) button to select the SETUP sub menu. 2) Press the left( ◀ ) or right( ▶ ) button to adjust the OSD Setting. • H. PO SITIO N : Move OSD horizontally on screen right or left.
Using the VESA standard wall mount design and the 100mm hole pattern on the back pan el to install the LCD monitor to the wall. Wall-mount Installati on (Option) 1.
▶ PIN A S SIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ A CCESSORIES 1. Power cord 2 .
This monitor features a power management sy stem to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync sig nal.
17 ’’ 1 9’’ LCD-Type 17 ˝ Diagonal AM-T FT(Active- Matrix) 19 ˝ Diagonal AM- TFT(Active -Matrix) Pixel pitch(mm ) : 0.264(H) x 0.2 64(V) Pixel pitch(mm ) : 0.
WEEE S ymbols 22 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of T his Product (Waste Electrical & Electronic Equipment) (App.
MEMO.
MEMO.
MEMO.
P/N : L39ME01 68 Rev.6.
デバイスViewZ VZ-17RTAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
ViewZ VZ-17RTAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはViewZ VZ-17RTAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ViewZ VZ-17RTAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ViewZ VZ-17RTAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ViewZ VZ-17RTAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はViewZ VZ-17RTAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ViewZ VZ-17RTAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちViewZ VZ-17RTAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。