ViewZメーカーVZ-17RTVの使用説明書/サービス説明書
ページ先へ移動 of 52
17/19-INCH VALUE TTF -LCD MONITOR INSTRUCT ION MANUA L Please read this manual thoroughly before use, a nd keep it handy for future re ference..
.
SAFETY INSTRUCTION ………………………………………………………………… .. 2 ~ 3 CAUTIONS ……………………………………………………………… .......................... 4 FCC RF INTERFERENCE STATEMENT …………………………… .
Important Safet y Instruction 1. Read these instru ctions. 2. Keep these Instru ctions. 3. Heed all w arnings. 4. Follow al l instructions. 5. Do not use this appa ratus near w ater . 6. Clean only with dry cloth. 7. Do not block any ventilation open ings.
- The apparatus sha ll not be expo sed to drippi ng or splashing and tha t no objects filled with liquids, such as vases, shall be place d no the apparatus .
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
NOTE This e quipment has been tested and f ound to comp ly with the limits for a Class A d igital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation.
A. BOTTOM P A NEL CONTR OL 1. DC 12V IN 2. HDMI IN 3. VGA(D-SUB) IN 4. VIDEO1(AV1) IN 5. VIDEO1(AV1) OUT 6. VIDEO2(AV2) IN 7. VIDEO2(AV2) OUT 8 , 9. AUDIO IN(R+L) for AV1, AV2 10 . PC STEREO IN 11 . TRIGGER INPUT 6 …………………………………………………………………… .
B. REMOTE CONT ROLLER (Option) 1. POWER( ) Turn the power ON or O FF. T here will be a few seconds delay before the displa y appears. 2. SOURCE Select pc or video( AV1/AV2/HDMI /PC) sourc es. 3. AUT O Auto geom etry adjustment in PC Sourc e. 4. HOLD Stop the Trigger & Au to switching functions.
C . FRONT KEY CONTR OL 1. SOURCE/ Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display . This button can also be used to move previous menu or status. 3, 4. AUTO/ ▼, ▲ These buttons allow user to move the sub-menu of the a ctiv ated function.
OSD MENU DESC RIPTION A : Custo m Menu (Only Video Input) 1) Press the M ENU button and then press the up( ▲ ) or dow n( ▼ ) button to select the Custom. 2) Press the up ( ▲ ) or dow n( ▼ ) button to select th e sub menu. 3) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the picture setting.
A : Custo m Menu (For RGB-PC & HD M I Input) 1) Press the M ENU button and then press the up( ▲ ) or dow n( ▼ ) button to select the Custom. 2) Press the up ( ▲ ) or dow n( ▼ ) button to select th e sub menu. 3) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the picture setting.
B. Picture / Sound Menu (Only Vi deo Input) 1 . Picture Mode 1) Press the M ENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / Sound. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Picture M ode.
2-1. Color Tone 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Color Tone. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the righ t( ▶ ) or SOURCE / button again. 4) Press the up( ▲ ) o r dow n( ▼ ) button to select th e Color Tone option.
2-2 . Color Tone (User) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e User. 2) Press the M ENU button. 3) Press the up( ▲ ) o r dow n( ▼ ) button to select th e User option. 4) Press the left( ◀ ) or right( ▶ ) bu tton to ad just the Red, G reen or Blue settin g.
3 . Mute 1) Press the up( ▲ ) or dow n( ▼ ) button to select the M ute. 2) Press the righ t( ▶ ) o r SOURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. 14 …………………………………………………………………… .
4 . Volume 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Volume 2) Press the le ft ( ◀ ) or right( ▶ ) bu tton to adjust V olume settin g. 3) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
5. Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size option. 4) Press the M ENU button to save. 16 …………………………………………………………………… .
6. NR (Noise Reduction) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select the NR . 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
7. 3D Comb 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e 3D Comb. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e On or Off. 4) Press the M ENU button to save. 18 …………………………………………………………………… .
B. Picture / Soun d Menu (For RGB- PC & HDMI Input) 1 . Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or down( ▼ ) button to selec t the Size opti on.
2 . PC (Only RGB- PC Inpu t ) 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PC. 2) Press the righ t( ▶ ) or SOURCE / button. 3) Press the up ( ▲ ) or down( ▼ ) button to selec t the PC sub menu . 4) Press the right( ▶ ) or S OURCE/ button.
C. PIP Menu 1) Press the M ENU button and then press the up( ▲ ) or down( ▼ ) button to select the PIP. 1. PIP 1) Press the right( ▶ ) or S OURCE/ button. 2) Press up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the M ENU button to save.
2. Input Source 1) Press the up( ▲ ) o r dow n( ▼ ) button to select th e Input Source. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Source option.
3. PIP Mode 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PIP Mode. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e PIP Mode option.
4. PIP Size 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Size option. 4) Press the M ENU button to save. 24 …………………………………………………………………… .
5. Position 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Position. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Position option. 4) Press the M ENU button to save. ※ RB: Right of Bottom , LB: Left of Botto m, LT: Left of T op & RT: Rig ht of Top.
6. Swap 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Swap. 2) Press the right( ▶ ) or S OURCE/ button to sw ap the main ima ge for the sub one.
7. Sound Select 1) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Sound Select. 2) Press the right( ▶ ) or S OURCE/ button. 3) Press the up ( ▲ ) or dow n( ▼ ) button to select th e Sound Select option. 4) Press the M ENU button to save.
D. Setup Menu 1) Press the M ENU button and then press the up(▲) or down(▼) button to select the Setup . 1. Reset 1) Press the right( ▶ ) or S OURCE/ button 2 ) Press the right( ▶ ) or SOURCE/ button a gain. 3) Press SOURC E/ button to execute the reset.
2. Language 1) Press the up (▲) or dow n(▼) button to select th e Language. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up (▲) or dow n(▼) button to select la nguage. 4) Press the M ENU button to save. INSTRUCTION MANUAL …………………………………………………………………… .
3. OSD Tone 1) Press the up (▲) or dow n(▼) button to select th e OSD T one . 2) Press the righ t( ▶ ) or SOURC E/ button 3) Press the up (▲) or dow n(▼) button to select th e OSD T one option. 4) Press the M ENU button to save. 30 …………………………………………………………………… .
4. Blue Screen 1) Press the up (▲) or dow n(▼) button to select th e Blue Screen. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up (▲) or dow n(▼) button to select the On or Off. 4) Press the M ENU button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
5. Key Lock 1) Press the up (▲) or dow n(▼) button to select th e Key Lock. 2) Press the righ t( ▶ ) or SOURC E/ button 3) Press the up (▲) or dow n(▼) button to select the On or Off 4) Press the M ENU button to save. 32 …………………………………………………………………… .
6. Trigger 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger. 2) Press the righ t( ▶ ) or SOURC E/ button. 6-1. Trigger Enable 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Enable. 2) Press the righ t( ▶ ) or SOURC E/ button.
6-2. Trigger Input 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Input . 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Trigger Input option. 4) Press the M enu button to sav e.
6-3. Buzzer 1) Press the up(▲ ) or dow n(▼) button to select th e Buzz er. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select the On or Off. 4) Press the M enu button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
6-4. Trigger Time 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Time . 2) Press left( ◀ ) or right( ▶ ) button to adjust Trigg er Time settin g. 3) Press the M ENU button to sav e. 36 …………………………………………………………………… .
6-5 Trigger Option 1) Press the up(▲ ) or dow n(▼) button to select th e Trigger Option. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to sele ct the Trigger Option settin g. 4) Press the M enu button to sav e.
6-6. Display Type 1) P ress the up(▲ ) or dow n(▼) button to select th e Display Type. 2) Press the righ t( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Display Type option. 4) Press the M enu button to sav e.
7. Auto switching 1) Press the up(▲ ) or dow n(▼) button to select th e Auto swi tching. 2) Press the righ t( ▶ ) or SOURC E/ button. 7-1. Auto switching On/Off 1) Press the righ t( ▶ ) or SOURC E/ button. 3) Press t he up(▲ ) or dow n(▼) button to select th e On or Off .
7-2. Auto switching Input enabled 1) Press the up(▲ ) or dow n(▼) button to select th e Inputs enabled . 2) Press the right( ▶ ) or SOURC E/ button. 3) Press the up(▲ ) or dow n(▼) button to select th e Input. 4) Press the righ t( ▶ ) or SOURC E/ button.
7-3. Auto switching Time 1) Press the up(▲ ) or dow n(▼) button to select th e Time . 2) Press the left( ◀ ) or right( ▶ ) button to adjust the Time setting. 3) Press the M ENU button to sav e. INSTRUCTION MANUAL …………………………………………………………………… .
Using the VESA standard wall mount design and the 100 × 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation(Option) 1.
▶ PIN A SSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORIES 1. Power cord 2.
POWER CONSUMPTION MODE POWER CONSUMPTION 17 ” 19 ” ON < 40W < 45W POWER OFF < 1W LED INDICATOR The power management feature of the monitor is comprised of four stages: ON(GREEN) and POWER OFF(GREEN OFF ).
17 ’’ 1 9’’ LCD-Type 17 ˝ Diagonal AM-T FT(Active- Matrix) 19 ˝ Diagonal AM- TFT(Active -Matrix) Pixel pitch(mm ) : 0.264(H) x 0.2 64(V) Pixel pitch(mm ) : 0.
WEEE S ymbols 46 …………………………………………………………………… . INSTRUCTION MANUAL Correct Disposal of T his Product (Waste Electrical & Electronic Equipment) (Ap.
MEMO.
MEMO.
.
P/N : L39ME01 96 Rev.4.
デバイスViewZ VZ-17RTVの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ViewZ VZ-17RTVをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはViewZ VZ-17RTVの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ViewZ VZ-17RTVの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ViewZ VZ-17RTVで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ViewZ VZ-17RTVを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はViewZ VZ-17RTVの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ViewZ VZ-17RTVに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちViewZ VZ-17RTVデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
