VIPowERメーカーVPA-3528Netの使用説明書/サービス説明書
ページ先へ移動 of 41
Aluminum USB 2.0 , LAN 3.5 HDD NetW ork Storage User’s Ma nual ViPowER W e are your DataBridge TM http://www .vi power .com V P A-3528Net.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 2 ViPowER / VP A-3528Net User`s Ma nual TRADEMARKS MS-DOS, Windows 98/98SE/NT/2000/Me/XP are trademarks of Microsoft Corporation. PC is a trademark of International Business Machines Corporation. Macintosh and Mac are trademarks of Apple Computer, Inc.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 3 ViPowER / VP A-3528Net User`s Ma nual CONTENS Specfications....................................................................................04 Features...............................................
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 4 ViPowER / VP A-3528Net User`s Ma nual Specfications Ea sy configuration and firmware upgrade under web-ba sed GUI. Support Hardware Reset function by pressing the Power ON/OFF key for five seconds.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 5 ViPowER / VP A-3528Net User`s Ma nual Fe atures Drive enclosure made of aluminum alloy to aide in heat dissipation. Support USB 2.0 tran sfor rates up to 480 Mbit/Sec. Support 3.5-inch IDE hard disk.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 6 ViPowER / VP A-3528Net User`s Ma nual Package Checklist The VPA-3528Net - 3.5” HDD Aluminum NetWork Storage package contains the following items: 1. One VPA-3528Net Aluminum Case 2. Two Rubber Stands 3.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 7 ViPowER / VP A-3528Net User`s Ma nual Hardware Installation Diagra m for VP A-3528Net Aluminum USB 2.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 8 ViPowER / VP A-3528Net User`s Ma nual Installation Proceed with the following steps to install the V P A-3528Net hardware.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 9 ViPowER / VP A-3528Net User`s Ma nual Step 3. The illustration is the Components of the VP A-3528Net NetWork Storage. Inner Cradle with Front Cover a nd PCB Body Outer Cover with Rear Pan el Rubber Sta nds(x2) Retaining Screws Step 4.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 10 ViPowER / VP A-3528Net User`s Ma nual Step 6. (1) Position the ba ck of the Inner Cradle Assembly into the head of the Body Outer Cover. Step 5. Secure the HDD and the Inner Cradle with f our retaining screws (two on eac h side).
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 11 ViPowER / VP A-3528Net User`s Ma nual Step 7. Rep la ce the two screws which were removed in Step 1 from the back of the VP A-3528Net NetW ork Storage.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 12 ViPowER / VP A-3528Net User`s Ma nual The hard drive installation is complete, and the V P A-3528Net NetW ork Stor- age is ready to use.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 13 ViPowER / VP A-3528Net User`s Ma nual VP A-3528Net NetW ork Storage Appliction Personal Data Backup For a single user , you can use V P A-3528Net NetWork Storage a s an exrernal Hard disk driver to a ccess your data through the Ethernet.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 14 ViPowER / VP A-3528Net User`s Ma nual FTP Remote Backup VP A-3528Net NetWork Storage packs the power of FTP function a nd this will give you the remote ba ckup feature. If you plan to use the FTP , use the FTP supported by Browser .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 15 ViPowER / VP A-3528Net User`s Ma nual NOTE: Do NOT conne ct Ethernet and USB cab le s at the sa me time. Conne cting the VP A-3528Net to a Computer Ethernet Network Storage Mode Proceed with the following steps to use the VP A-3528Net Network Storage.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 16 ViPowER / VP A-3528Net User`s Ma nual USB Storage Mode Proceed with the f ollowing steps to use the VP A-3528Net NetWork Storage.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 17 ViPowER / VP A-3528Net User`s Ma nual Setup the VP A-3528Net Network Storage Configure your VP A-3528Net NetWork Storage through W eb Browser 1 Enter in URL, then Key in landis k in IE a nd press Enter .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 18 ViPowER / VP A-3528Net User`s Ma nual 5 The GUI setup window will show up a s below . 5-1-1. Status Segment Click on Status shown on the LEFT side of the GUI setup window to enter into the window below.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 19 ViPowER / VP A-3528Net User`s Ma nual 5-1-2. Identification Segment Press the Change button following the Host Na me and Group Na me Seg- ment on the System Information Segment to enter into the Identification window.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 20 ViPowER / VP A-3528Net User`s Ma nual 5-1-3. Administration segment Press the Change button following Administrator to enter into Administra- tion window.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 21 ViPowER / VP A-3528Net User`s Ma nual 5-1-4. Date/Time Segment Press the Change button following Date/Time Segment to enter into Date/ Time window. Y ou can set up the Date/T ime/SNTP/T im e Server/T ime Zone information in this window .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 22 ViPowER / VP A-3528Net User`s Ma nual 5-1-5. Languages Segment Support English/Ja pan e se/T radition Chinese/Simple Chinese.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 23 ViPowER / VP A-3528Net User`s Ma nual 5-1-6. Firmware version Segment NAS-BASIC16 : Show the built-in version from factory .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 24 ViPowER / VP A-3528Net User`s Ma nual 5-1-7. Network Information Segment IP Address : Show the connecting Ethernet IP address of the V P A-3528Net NetWork Storage.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 25 ViPowER / VP A-3528Net User`s Ma nual 5-1-8. Disk Information Segment Disk ID : Show the fa ctory model na me of the HDD installed in the VP A- 3528Net NetW ork Storage. Free Size : Show the still available ca pa city of the HDD installed in the VP A-3528Net NetW ork Storage.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 26 ViPowER / VP A-3528Net User`s Ma nual 5-2. IP Config Segment Click on IP Config shown on the LEFT side of the GUI setup window to enter into IP Config window .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 27 ViPowER / VP A-3528Net User`s Ma nual 5-3. Maintenance Segment Click on Maintenance shown on the LEFT side of the GUI setup window to enter into the window below. Read the instructions on the window to upload the Firmware Upload, Sys- tem Reboot or go ba ck to the Factory Defaults settings.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 28 ViPowER / VP A-3528Net User`s Ma nual Y ou ca n ma nage your share folders a nd their pa sswords in this window . 1. If your VP A-3528Net NetW ork Storage ha s previously been formatted using Disk Utility feature in status segment, the default folder [PUBLIC] will show in this window .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 29 ViPowER / VP A-3528Net User`s Ma nual 3. By ticking on the folder Na me a nd the Pa ssword button on Sharing List , you ca n set the Pa ssword of the folder on the Pa ssword- Microsoft Internet Explorer window.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 30 ViPowER / VP A-3528Net User`s Ma nual 5-5. FTP Server Segment Click on FTP Server shown on the LEFT side of the GUI setup window to enter into the FTP Configuration window below.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 31 ViPowER / VP A-3528Net User`s Ma nual Press on Add button show on Account List to add FTP user’s account. Y ou can setup ea ch “FTP Status” a nd “Allow anonymous? (User Na me, Pa ssword, Acce ss a nd En/Disable)” in the window .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 32 ViPowER / VP A-3528Net User`s Ma nual 5-6. Disk Utility Segment Click on [Disk Utility] shown on the LEFT side of the GUI setup window to enter into the window below. If your HDD is an unf ormatted new drive, you need to format the drive vi a this utility .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 33 ViPowER / VP A-3528Net User`s Ma nual ReSet the VP A-3528Net Network Storage.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 34 ViPowER / VP A-3528Net User`s Ma nual M a p your VP A-3528Net NetW ork Storage By ma pping your VP A-3528Net NetW ork Storage, you ca n a ccess it ea sily in the Computer. Use the right mouse but- ton to click the Start icon located in the lower left corner of the Windows ta skbar .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 35 ViPowER / VP A-3528Net User`s Ma nual The following window will a ppear . Choose a Drive letter you want to ma p. Press Finish button to complete ma pping. As the following window illustrates, you ca n now access V P A-3528Net NetWork Storage ea sily in the Computer .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 36 ViPowER / VP A-3528Net User`s Ma nual T rouble Shooting 1. While your V P A-3528Net NetW ork Storage ha s been properly connected to the PC, but the GUI setup window doe s not a ppe ar properly after you type VP A-3528Net on the Browser and enter the Pa ssword, you need to config- ure your IP.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 37 ViPowER / VP A-3528Net User`s Ma nual Select a nd click on Propertie s on the sub-window . The Local Area Con- nection Propertie s window a ppears. Point a nd use the right mouse button to click on Local Are a Connection , a nd the sub-window will a ppear .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 38 ViPowER / VP A-3528Net User`s Ma nual 3. How to configure your IP while your system is under Static IP? . Obtain IP , SubNet Ma sk, gateway , DNS data from your operating system. . Reconfigure your PC a s auto IP by obtaining a n IP address automatically .
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 39 ViPowER / VP A-3528Net User`s Ma nual 4. I can’t use the web browser to setup my V P A-3528Net. Setp.1 Click ”T ools” a nd sele ct <Internet Option> Setp.2 Click on the “Clear History” button.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 40 ViPowER / VP A-3528Net User`s Ma nual Setp.3 Click on the “Y es” button. Setp.4 Select <Content> a nd click on the “AutoComplete” button.
ViPowER / 3.5-inch Aluminum HDD NetWork Storage 41 ViPowER / VP A-3528Net User`s Ma nual Setp.5 Click on the “Clear Pa sswords” button. Setp.6 Click on the “OK” button to clear pa sswords.
デバイスVIPowER VPA-3528Netの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
VIPowER VPA-3528Netをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVIPowER VPA-3528Netの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。VIPowER VPA-3528Netの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。VIPowER VPA-3528Netで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
VIPowER VPA-3528Netを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVIPowER VPA-3528Netの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、VIPowER VPA-3528Netに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVIPowER VPA-3528Netデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。