VivitarメーカーT327の使用説明書/サービス説明書
ページ先へ移動 of 54
ViviCam T 327 Digital Camera User Manual © 20 10 Sakar Inter national, Inc. All righ ts reserv ed. Windows and the Windows logo ar e registered trade marks of Micros oft Corpor ation. All other trade marks are the property of their re spective comp anies.
1 Contents Introduction .................................................................................................................................. 2 W hat‟ s Inclu ded .........................................................................
2 Introduction Thank you for purchasing this camera. Every thing you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Note: Your camera needs an SD Memory card (up to 32GB) for normal use.
3 Parts of the Camera 1. Po w er Button 12. ViviLink / Dow n Button 2. Shutter Button 13. Microphone 3. LCD Screen 14. Flash Light 4. LED / Charge Lamp 15. USB Slot 5. Zoom In 16. T ripod Socket 6. Zoom Out 17. Digital Lens 7. MODE Button 18. Battery Compartment 8.
4 Initial Camera Set up Installing the Battery Installing the Memory Card To Charge the Ba ttery: Insert the batte ry as sho wn abov e. Make sure the polarity is correc t. Pow er off the camera. Connect the camera wi th the USB cable either to the AC charger or to the computer.
5 W hen p owering the camera ON for the first time the camera wil l take you through the INITIAL CAMERA SETUP: Powering the Came ra ON 1) Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
6 Setting the Date a nd T ime The next step in the initial camera setup is to set the date and time o n the camera. Set the Date a nd Time as Desired and pr ess the SET button to confirm the s election and move to the next part of the camera setup.
7 Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the came ra has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera.
8 Camera Techn ical Specificatio ns Image Sensor CMOS Sensor Image Resolution (8M) 3264 x 2448 pixels, (7M HD) 3648 x 2048 pixels, (5M) 2592 x 1944 pixels, (3M) 2048 x 1536 pixels, (2M HD) 1920 x 1080.
9 Computer Sy stem Requirements – WINDOWS OS To be able to download photos and videos to y our PC, you will need the following minimum configuration: Pentium 4 processor or above with W indows X.
10 Changin g Camera Mode Your camera has three main modes: 1) Photo Capture Mode - Use this mode to capture photos with your camera . 2) Video Capture Mode - Use this mode to capture videos with your camera . 3) Playback Mode (for photos and videos) - Use th is mode to view the photos and videos you have already taken with your camera.
11 5) If the selection can be remembered by the camera, a selection icon will appear to the right of the selected menu option. Cha nges made to these options will remain as is until you decide to change them again at a later time.
12 Flash Options There are several Flash options available on y our camera. The options appear on the Photo Capture Mode LCD screen in the sequence. To change the Flash mode, press the Up Quick Function button until y ou arrive at your desired settings.
13 Scene Menu The Sc ene Menu al lows you to c hoose scene settings that allow your camera t o a dapt pro perly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
14 Image Resolution Menu The Image Resolution menu allows you to ch oose the desired size of the images taken by y our camera. Keep in mind that images with a higher resolution wil l also take up more of your camera‟s memory. 1) Press the SET button to open the menus for the current mode.
15 Self-Timer Menu The Self- Timer menu allows you to set a delay between the time that the camera‟s shutter button is pressed and the actual capture of the picture. This is an optimal fe ature if you don‟t just want to take the picture but would also like to be in the picture yourself.
16 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Face Detect Menu The Face Detect feature when set to „On‟ allows the camera to use a subject‟s face as the basis for balancing the other colors and focus in the camera ‟ s d isplay.
17 Smile Capture Menu The Smile Capture feature when set to „On‟ allow s the camera to automatically take a picture when it detects that a subject in the picture is smiling. Note: To properly use the Smile Capture feature, please ensure the following: Macro mode off – Smile Capture will not work if the camera is in Macro mode.
18 Macro Menu W ith t he Macro feature, you can capture images at close range (30 ~ 45 cm). W hen enabled, the Macro mode will allow your camera to focus on an object that is very close to the camera. The flower icon will appe ar on the LCD and indicates that the Macro mode is on .
19 4) Press the SET button to select the desired option. 5) A select ed option icon w ill appear on the selected item . 6) Pr ess the LEFT or RIGHT button t o select the next menu item. 7) Press the MODE button to exit the menu and return to your previous mode.
20 5) A select ed option icon w ill appear on the selected item . 6) Press the LEFT or RIGHT button to select the next menu ite m. 7) Press the MODE button to exit the menu and return to your previous mode.
21 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DO WN direction control buttons to scroll through the menu options. 4) Press the SET button to select the desired option. 5) A select ed option icon w ill appear on the selected item .
22 Metering Menu The Metering setting will affect how your camera focuses when capturing an image. Depending on your selection, the camera wil l be more sensitive to focusing on particular areas in the display and adjust the image color and lighting accordingly .
23 4) Press the SET button to select the desired option. 5) A select ed option icon w ill appear on the selected item . 6) Press the LEFT or RIGHT button to select the next menu ite m. 7) Press the MODE button to exit the menu and return to your previous mode.
24 4) Highlight the “Date Setup” menu option. 5) Press the SET button to select the desired option. 6) The “ Date Setup ” submenu will open. 7) Scroll through the window with the RIGHT and LEFT navigation buttons. For each field in the menu, use the UP and DO W N navig ation buttons to set t he time and date.
25 5) A select ed option icon w ill appear on the selected item . 6) Press the LEFT or RIGHT button to select the next menu ite m. 7) Press the MODE button to exit the menu and return to your previous mode.
26 This option will delete all of the content at one time. If you w ould like to delete individual images, use the delete menu in the camera‟s Playback mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
27 Photo Play back Mod e W hen y ou first turn on the camera, the camera wil l be in Photo Capture mode by default. Press the MODE button twice to open the Playback Mode. The play back mode will allow you to review and edit p hotos and videos that you‟ve already taken with you cam era.
28 Right Dis plays the NEXT image Down Op ens the ViviLink menu Photo Playback Mode Menus The following are the menus that appear in your camera‟s Photo Pl ayback Mode: Delete Menu W hile in the Playback Mode, you can delete pictures from your camera through the delete menu.
29 The Viv iLink technology allows you to quickly and easily up load y our camera‟s p hotos an d v ideos to the social networks of your choice with the accompany in g Vivitar Experience Image Manager application. 1) Press the SET button to open the menus for the current mode.
30 Crop Image Menu You can crop any picture on your camera with the Crop feature . 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DO WN to highlight the Crop option.
31 Print Photos Menu You can use the Print Photos menu to print the photos t hat are on your camera directly to a Pictbridge compatible printer. 1) Scroll through your pictures and find the one you would like to print. 2) Press the SET button to open the menus for the current mode.
32 Video Capture Mode The Video Capture Mode allows you to capture videos w ith your digital camera. W hen the camera is first powered ON, the camera will be in Photo Capture Mode.
33 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Ca pture Mode:.
34 Scene Menu The Sc ene Menu allows y ou to choose scene sett ings that allow your c amera to adapt properly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
35 Image Quality Menu The Image Quality menu allows you to select the desired q uality le vel of the images taken b y your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode.
36 Macro Menu W ith t he Macro feature, you can capture images at close range (30 ~ 45 cm). W hen enabled, the Macro mode will allow your camera to focus on an object that is very close to the camera. The flower icon will appe ar on the LCD and indicates that the Macro mode is on .
37 5) A select ed option icon w ill appear on the selected item . 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the L CD screen.
38 8) An icon reflecting your selection will display on the L CD screen 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Light Exposure Menu The Light Exposure setting helps you control the amount of light that enters y our camera‟s lens.
39 W hen t he ISO is reduced, the image sensor in your camera will be less sensitive to light and wil l optimize the image quality in envir onments with bright lighting. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
40 6) Press the LEFT or RIGHT button to select the next menu ite m. 7) Press the MODE button to exit the menu and return to your previo us mode. 8) An icon reflecting your selection will display on the L CD screen.
41 3) Press the UP or DO WN direction control buttons to scroll through the menu options. 4) Press the SET button to select the desired option. 5) A se lected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item.
42 Auto Power Off Menu You can use the Auto Pow er Off feature in order to conserve you camera‟s battery life. The designated time represents when your camera w ill automatically power off.
43 7) Press the MODE button to exit the menu and return to your previous mode. 8) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
44 4) Press the SET button. 5) You will be asked to confirm your wish to restore all of the factory settings. 6) The settings will be reset. 7) A message will appear indicating that the settings have been reset s uccessfully . Video Play back M ode W hen y ou first turn on the camera, the camera wil l be in Photo Capture mode by default.
45 Video Playback Mode Quick Functi on Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Button Action Left Displays the PREVIOUS image Up Stops a playin.
46 V iviLink Menu The Viv iLink technology allows you to quickly and easily up load y our camera‟s p hotos an d v ideos to the social networks of your choice with the accompany ing Vivitar Experience Image Manager application. 1) Press the SET button to open the menus for the current mode.
47 Installing the Soft ware You must be connected to the internet to install and run the Viv itar Experience Image Manager software. 1) Insert the installation CD into your CD-ROM drive. The installation screen should automatically open. 2) On PC: The Vivitar Experience Image Manager Installer window appears.
48 5) If you have i nternet access, the “Choose your language” window opens, choose your language and click “Next” to open the next w indow. 6) Select your camera model from the list and click “N ext” to open the next window. 7) Click “Next” to confirm y our camera model selection and to install the application.
49 Getting Photos and Videos from your Camera to Your Compu ter An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their w ay to your computer. 1) Select the “Get Images” button from the Main menu.
50 Get started! Using the Vivitar Experience Image Manager, y ou can: Upload an d manage photos and videos to and f rom the most p opular photo sharing and social networking sites - Facebook, Flic.
51 Transfer media f rom my camera to my computer manually (Using Macintosh) 1) Use the USB cable that came with your camera to connect your camera to your c omputer. 2) MSDC appears on the LCD. 3) The camera‟s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and the folder inside to view the media files.
52 W hat Is No t Covered By W arranty: Damages or malfunctions not resulting from defects in material or w orkmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthori zed parties, tampering, modification or accident.
53 Troublesho oting Q: I have taken photos and selected the “Get Images” button. I g et a message that the images were successfully transferred but the photos do not appear on my computer. W hat do I do? First ensure that you have in fact taken photos.
デバイスVivitar T327の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Vivitar T327をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVivitar T327の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Vivitar T327の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Vivitar T327で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Vivitar T327を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVivitar T327の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Vivitar T327に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVivitar T327デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。