VivotekメーカーIP3133の使用説明書/サービス説明書
ページ先へ移動 of 68
.
- 1 - www .vivotek.com T : 886-2-82455282 F: 886-2-82455532 Before You Use This Product The use of surveillance devices may be prohibited by law in your country . The Network Camera is not only a high-performance web-read y camera but also can be part of a flexible surveillance system.
- 2 - www .vivotek.com T : 886-2-82455282 F: 886-2-82455532 Table of Contents Before Y ou Use This Prod uct ...................................................................... 1 P ackage Contents ....................................................
- 3 - www .vivotek.com T : 886-2-82455282 F: 886-2-82455532 WLAN Configuration .................................................................... 38 Mail & FTP .....................................................................................
- 4 - www .vivotek.com T : 886-2-82455282 F: 886-2-82455532 DDNS & UPnP configuration URL ................................................... 61 Video configuration URL .............................................................. 62 Image quality configur ation URL .
- 5 - www .vivotek.com T : 886-2-82455282 F: 886-2-82455532 Package Contents IP3133 P ower adapter Camera stand I/O terminal block connector Software CD Quick installation gu ide W arranty card.
- 6 - www .vivotek.com Installation Hardware installation Please verify that your pr oduct package contains all the accessories liste d in the fo regoing Package Contents. Depending on the u ser’s application, an Ethernet cable may be needed. The Ethernet cable should meet the sp ecs of UTP Category 5 and not exceed 100 meters in length.
- 7 - www .vivotek.com to next paragr aph “Software installation” . If the Ethernet is not available, Network Camera will switch to wireless L AN mode. To install in wireless LAN If the Ethernet is not available while power on, the Network Camera will search for any access point with the SSID “default ” .
- 8 - www .vivotek.com Software installation At the end of the hardware installation, users can u se Installation Wiza rd program included in the produ ct CDROM to find the location of the Network Camera. There may be many Network Cameras in the local network.
- 9 - www .vivotek.com Add Password to prevent Unauthorized Access The default Administrator’s password is blank and the Network Camera initially will no t ask for any password. The Administrato r should immediately implement a new password as a matte r of prudent security practice.
- 10 - www .vivotek.com How to Use Authentication After opening the W eb browse r and typing in the URL of the Network Camera, a dialogue window po ps up to request a usernam e and password. Upon successful authentication, the following fig ure is displayed.
- 11 - www .vivotek.com Installing plug-in For the initial access to the Network Camera in Windows, the web browser may prom pt for permission to install a new plug-in for the Network Camera. Permission request depends on the Internet security se tting s of the user ’s PC or notebook.
- 12 - www .vivotek.com Primary user’s capability Main Screen with Camera View The main page layout has two parts: Configuration functions : The camera can be configured using these user interfaces. Camera View : What the camera sees. Click on the configuration link to the le ft of the image window t o enter the configuration page.
- 13 - www .vivotek.com Digital Zoom Click on the ma gnifier icon under the camera view then the digital zoom control panel will be shown. Uncheck “D isable digital zoo m” and use the slide r control to change th e zoom factors. Digital Output Clicking on the “On” or “Off” bu tton turns the digital output to either on or off status.
- 14 - www .vivotek.com Client settings At the initial access to the “Connection type” page in Windows, the web browser will as k for a new plug -in inst all atio n, the p lug- in bein g the Ne twork Came r a. Th is plug -in ha s been registered for certification and can be used to change the parameters at the client’s site.
- 15 - www .vivotek.com The HTTP protocol must be selected if the network is protected by a firewall and it only allows HT TP Port (80) to be opened. In this mode, audio wi ll not be sent and only video is operational. If no special need is required, UDP pr otocol is recommended.
- 16 - www .vivotek.com Administrator’s capability Fine-tuning for Best Performance Best performance generally equates to the fa stest image refresh rate with the be st video quality , and at the lo west network bandwidth as possible.
- 17 - www .vivotek.com and set the maximum frame rate to 30 fps. If the images vary dramatically in your environment, you may want to slow the maximum frame rate down to 20 fps in order to lower the rate of data transmission.
- 18 - www .vivotek.com Opening accounts for new users Protect Network Camera by passwords The Network Camera is shipped without any password by default. That means everyone can access the Network Camer a including th e configuration as long as the IP address is known.
- 19 - www .vivotek.com users from ○ 3 . More flexible options for viewers ○ 4 The first option allow s anyone uses “demo” as the user name to view w ithout password. The Administrator can also decide if more viewers ar e allowed to watch the video if the viewers exceed the limit.
- 20 - www .vivotek.com How to change the font color 1. Click on “Configuration” on homepage, 2. Click on “Homepage layout” at the left column, 3. Find “Font color” a nd pull down the li st to choose any color you like, 4. Click on “Save” button.
- 21 - www .vivotek.com If you want to use the image from ano ther web site as background, 3. Find “Background graph” and choose “Url” , 4. T ype the URL of the image on the Internet in the edit box, for example, “http://dgl.microsoft.com/thum bnails/j023/j0235217(t).
- 22 - www .vivotek.com How to change the image logo at the upper left corner of homepage 1. Click on “Configuration” on homepage, 2. Click on “Homepage layout” at the left column, If y ou want t o r emove a ny logo , 3. Find “Logo graph” and choose “blank” , 4.
- 23 - www .vivotek.com 7. T ransfer logo.gif in local folder to the Network Camera, 8. Close the F TP program and reload the homepage o f the Network Camera. If you want to add hyperlink to the logo image, 3. Find “Logo l ink” and type the hyp erlink in the edit bo x, for example, http://www.
- 24 - www .vivotek.com How to design my own homepage to replace the current one 1. Prepare your own homepag e with size less than 65 000 bytes and rename i t to user .htm, 2. Insert the html codes of video obje ct, the bold Italian text in the following example, into the appropriate position in user .
- 25 - www .vivotek.com 3. Open an F TP client program and connect to the Network Camera. The user name and password is a s same as the A dministrator’s. 4. T ransfer user .htm in local fol der to the Network Camera, 5. Close the F TP program and reload the homepage o f the Network Camera, 6.
- 26 - www .vivotek.com Build a multimedia web attraction site Demo on multiple sites – mid-scale service The Network Camera can allow ten visitors on-line simultaneously . After Installation, focus the Network Camera on any view you would like friends to share and tell the visitors to type in the web browser addr ess.
- 27 - www .vivotek.com If you want to expand to allow in more viewers, the host server should be able to handle large network traffic, which m u st han dle the pict ure refreshing from the Network Camera. If the web space ha s FT P service, Set the Network Camera as an F TP client to upload the pictures.
- 28 - www .vivotek.com 5. Click on “ Applicati on” at the left co lumn, 6. Select the weekday and daily schedule you want to upload the pictures, 7. Select “Sequential operation” and set the interval, 8. Select F TP without date time suffix as th e upload method and cl ick on save, 9.
- 29 - www .vivotek.com ****** Example homepage begin ****** <html> <head> <title>Example - au to refresh</titl e> </head> <body background="/pic/wallppr .
- 30 - www .vivotek.com Build a security application The Administrator can combine options on t h e application page to perform m any useful security applications. There a re two trigger sources coming from attached devices such as for m otion detection.
- 31 - www .vivotek.com 5. Set the delay before detecting ne xt event to avoid continuous false alarms following the original event, 6. Set the delay to take snapshots after event to capture the direc.
- 32 - www .vivotek.com 16. Check “Upload snapshots while m otion detected” , if e-mailing the snapshots is preferred, 17. Check “Send snapshots by email” , 18.
- 33 - www .vivotek.com Software revision upgrade Customers can obtain the up-to-date so ftware from the web site of Vivotek. An easy -to -use Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade function is opened to the Administrator only .
- 34 - www .vivotek.com Definitions in Configuration Only the Administrator can access sy stem configuration. Each category in the lef t column will be explained in the following pages. The bold texts are the specific phrases on the Option pages. The Administrator may t ype the URL below the figure to directly enter the frame page of configuration.
- 35 - www .vivotek.com System parameters "Host name" The text displays the title at the top of the main page. “Turn off the LED indicator” Check this option to shut o ff the LED beside the len s. It can prev ent others from obs e rving the oper ation.
- 36 - www .vivotek.com Security settings “Root password” Change the Administrator’s password by typing in the new passwo rd identically in both t ext boxes. The typed entries will be display ed as asterisks for security purposes. After pressing , the web browser wi ll ask the Administr ator for the new passwor d for access.
- 37 - www .vivotek.com Network settings Any changes made on this page will restart the system in order to v a lidate the changes. Make sure every field is entered correctly before clicking on . "Reset IP address at next boot" , the default status is che cked to get IP address automatically at the server start.
- 38 - www .vivotek.com Streaming “Control channel port” This can be so mething other than the default port 5001 in order to work with th e port opened by the firewall. “Audio channel port” This can be something othe r than the default port 5002 in order to work with th e port opened by the firewall.
- 39 - www .vivotek.com The default setting is “auto” , that is the Netw ork Camer a will try to connect to the other wireless device with highest transmitting rate.
- 40 - www .vivotek.com Mail & FTP SMTP When the SMTP server support SMTP authenti cation, users need to give the valid user name and password to send email via the server . “SMTP (mail) server 1” The domain name or IP addre ss of the external email se rver .
- 41 - www .vivotek.com the external F TP server for details. The folder privilege must be open for upload. “Primary FTP passive mode” The Network Camera is located inside th e network protected by a firewall, data con nection for F TP may be prohibited.
- 42 - www .vivotek.com DDNS and UPnP settings “Enable DDNS” This option turns on the DDNS function. “Provider” The provider list contains four hosts that provide D DNS services. Please connect to the service provider ’ s website to mak e sure the service charges.
- 43 - www .vivotek.com Video codec parameters “Text on video” The text will be displayed in the black bar a bove the video window with a timestamp. The timestamp is cap tured from the date and time of the Networ k Camera that is maintained by a built-in real-time clo ck.
- 44 - www .vivotek.com recall the original settings without incorporating the changes..
- 45 - www .vivotek.com Motion detection “Enable motion detection” Check this option to turn on motion d etection. Click on this button to add a new window . At most three windows can exist simult ane ously . Use the mouse to click , hold, and dr ag the window fr ame to resize or the title bar to move.
- 46 - www .vivotek.com Application settings Weekly schedule “Sun” ~ “Sat” Select the days of th e week to perfo rm the following o perations. “Snapshots begin at” Set the time to start op erations. “Snapshots stop at” Set the time to stop operations.
- 47 - www .vivotek.com for the snapshots, before event, right upon event, and after event. The date and time suffix may also be added a s an option. Confirm the external ma il or FT P server settings in the network configuration.
- 48 - www .vivotek.com Homepage layout settings “Use the customized homepage” , check this option to use “user .htm” uploaded by the Administrator instead of the default one. R efe r to the section “ Administrator’s capability” for detail us age.
- 49 - www .vivotek.com Viewing system log Click the link on th e configur ation pag e to view the syst em log file . The content of the file provides usefu l information about con figuration and connection after system boot- up. Viewing system parameters Click on this link on th e configuration page to view the entire system’s par ameter set.
- 50 - www .vivotek.com Appendix A. Troubleshooting Status LED After powering up, the Network Camera pe rforms a self -dia gnostic to detect any hardware defects. The follow ing table lists the LED patterns in general. In case of any fatal error , the LE D will blink in a pattern other tha n those below.
- 51 - www .vivotek.com B. Frequently asked questions Q What if I forget my pas sword? A After the Administrator's password is assigned, every access to the Netw ork Camera needs authentication. If you are one of the managed users, you have to ask the Administrator for the password.
- 52 - www .vivotek.com Differences o f several hours may result from the time zone setti ng. Q Can I install it on ceiling? A Y es. There are flip and mirror options in vide o configuration page to correct the images for upside down installation. Q The ima ge is not clear enough.
- 53 - www .vivotek.com of users, it is recommended to build another web server to host the retrieving contents from the Network Camera. Q How fas t is the vide o rate of the Network Camera? A The MPE G4 codec engine can process 30 frames per second internally .
- 54 - www .vivotek.com C. URL commands of the Network Camera For some customers who already have their own web site or web control a pplication, the Network Camera can be easily integrated through convenient URLs. This section lists the commands in URL fo rmat corresponding to the basic functions of the erase Network Camera.
- 55 - www .vivotek.com The Network Camera will automatically restart after rest oring factory default configurations. Restart system /setup/reset.cgi R estart the Network Camera without warning.
- 56 - www .vivotek.com Page URL The configuration page has a frame layout including an option list frame and an option page frame. R eferen ced URLs, except for th e configuration page, direct users to th e option page frame only . Some pages, such as image quality setting and preset setting, are opened in new windows for preview .
- 57 - www .vivotek.com General format of command URL Every configur ation can be set through URL with POST method by the Administrator only . <general format> URL[?[name=value][&name=v alue]……] <method> POST <authorized user> root System configuration URL URL: /setup/system.
- 58 - www .vivotek.com Security configuration URL URL: /setup/security .cgi NAME V ALUE DESCRIPTION rootpass <text string shorter than 15 characters> change root passw ord username <text str.
- 59 - www .vivotek.com vport <number less than 65535> video Channel port aport <number less than 65535> audio Channel port yes optimal for the low bandwidth band no keep the original way .
- 60 - www .vivotek.com a ASCII format of key dkey 1 ~ 4 one of four keys netkey1 hexadecimal string (00 ~ FF) network key 1 netkey2 hexadecimal string (00 ~ FF) network key 2 netkey3 hexadecimal stri.
- 61 - www .vivotek.com ftpuser1 <text string shorter than 15 characters> user name for primary F TP server ftppass1 <text string shorter than 1 5 characters> password for primary F TP ser.
- 62 - www .vivotek.com usermail <text string shorter than 40 characters> T he login username of DDNS server or the email addres s registered in DDNS server . passkey <text string shorter than 40 characters> T he login password of DDNS server or the k ey given by the DDNS ser ver .
- 63 - www .vivotek.com 5 highest quality of vid eo 64000 set bit rate to 64K bps 128000 set bit rate to 128K b ps 256000 set bit rate to 256K b ps 384000 set bit rate to 384K b ps 512000 set bit rate.
- 64 - www .vivotek.com NAME V ALUE DESCRIPTION brightness <-5 ~ 5> adjust brightness of image contrast <-5 ~ 5> adjust contrast of image hue <-5 ~ 5> adjust hue of ima ge saturation.
- 65 - www .vivotek.com ioalarm < not required > trigger DO when DI condition matched mdalarm < not required > trigger DO when m otion detected ioupload < not required > upload snaps.
- 66 - www .vivotek.com D. Technical specifications - System CPU: T ri media PNX1300 RAM: 8MB SDRAM ROM: 2MB FLASH ROM - Networking Protocol TCP /IP , HT TP , SMTP , FTP , T elnet, NTP , DNS, DHCP , DDNS and UPnP Ethernet 10Base T or 100Base T F ast Ethernet WLAN 2.
Electromagnetic Compatibility (EMC) This device compiles wit h FCC Rules Part 15. Ope r ation is subject to the following two conditions. • This device may not cause harmful interfere nce, and • This device must accept any interferen ce received, includi ng interference tha t may cause undesired operation.
デバイスVivotek IP3133の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Vivotek IP3133をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVivotek IP3133の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Vivotek IP3133の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Vivotek IP3133で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Vivotek IP3133を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVivotek IP3133の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Vivotek IP3133に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVivotek IP3133デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。