VivotekメーカーND4801の使用説明書/サービス説明書
ページ先へ移動 of 202
VIVOTEK User's Manual - 1 Rev . 1.6.1.1 1 Rev . 1.0 User’ s Manual ND8401 Network Video Recorder V AST inside • HD Local Display • Full Integration with VIVOTEK Cameras Rev .
VIVOTEK 2 - User's Manual T able of Contents Revision History ..................................................................................................................................................... 7 Chapter One Hardware Installation and Initial Conguration .
VIVOTEK User's Manual - 3 Dual / Multiple Streams .......................................................................................................................... 52 Fisheye Display Modes ................................................
VIVOTEK 4 - User's Manual Edit Camera List ............................................................................................................................................ 91 Edit T ime Frame List .....................................
VIVOTEK User's Manual - 5 General Settings ......................................................................................................................................... 134 System Settings .............................................
VIVOTEK 6 - User's Manual Event Category- All Events .................................................................................................................. 172 Event Category- All Motion Events ........................................
VIVOTEK User's Manual - 7 Revision History Rev . 1.0: Initial release. Rev . 1.1a: Corrected description of the functions on e-map's right-click menu. Rev . 1.1b: • Added short description for the Auto stream size feature. • Added the Bookmark function.
VIVOTEK 8 - User's Manual Symbols and Statements in this Document i INFORMA TION: provides important messages or advices that might help prevent inconvenient or problem situations. NOTE : Notices provide guidance or advices that are related to the functional integrity of the machine.
VIVOTEK User's Manual - 9 Chapter One Hardware Installation and Initial Configuration Introducing ND8401 Network V ideo Recorder VIVOTEK ND8401 is a 16-CH Network Video Recorder designed for sophisticated recording ap- plications.
VIVOTEK 10 - User's Manual Physical Description Front View Rear View IMPORT ANT : It is important to leave a clearance of 15cm to the rear side of the chassis. The clearance is required to ensure an adequate airow through the chassis to ventilate heat.
VIVOTEK User's Manual - 1 1 Hardware Installation SA T A hard disk(s) are user-supplied. The network video recorder can readily accommodate most of the off-the-shelf SA T A hard drives. 1. Open the front panel. 2. Use the included bezel key to unlock the bezel lock.
VIVOTEK 12 - User's Manual 5. Install drive tray by pushing it into drive bay . when it is almost fully inserted, close the bezel. The bezel will secure the back-end connection to the backplane. 6. Use the bezel key to lock the drive tray . Repeat the process to install more disk drives.
VIVOTEK User's Manual - 13 Interface Connections 0 1 LAN Internet Router 1 2 3 4 5 6 7 LAN WA N VGA USB devices External enclosure Audio devices Power cord 1 & 2. Connect CA T5 or better-quality Ethernet cables to cameras via a local, switched net- work, or clients through the Internet.
VIVOTEK 14 - User's Manual Network Deployment 1. Connect network cameras to the NVR’s LAN ports. 2. If you want to access NVR over the Internet, connect the NVR to the Internet via the W AN port. A web console can be established from a remote PC by keying http://<public IP>:3454 in a browser ’s URL address eld.
VIVOTEK User's Manual - 15 Initial Conguration 1. The system power on self test and OS initialization takes about 2 minutes to complete. Once your NVR is started, you will be prompted by the Setup Wizard . Y ou should then begin the initial setup.
VIVOTEK 16 - User's Manual 4-3. Connect your W AN port to a router or AP with the routing capability and then to a DSL or Cable modem..
VIVOTEK User's Manual - 17 5. On the Disk page, Select disk drives by clicking the checkboxes in front of disk drives.Select Build single disk , Build RAID0 , RAID1, RAID5, RAID10 or other option from the Disk conguration pull-down menu. Click Apply and wait for a few minutes for the conguration to take effect.
VIVOTEK 18 - User's Manual Ready to Use 1. Y ou will then be at the Control Center screen. Double-click on the LiveClient or Playback buttons to congure live viewing and recording settings. 2. Open the LiveClient utility to change live view layout, camera streaming frame rate, and other options.
VIVOTEK User's Manual - 19 3-2. Click on the Search button. 3-3. Select cameras by clicking their checkboxes. 3-4. Click OK, return to the previous window , and click the Insert button.
VIVOTEK 20 - User's Manual In terms of local display , the default stream 1 for live view can be congured with a resolution up to Full HD 30fps. Stream 1 is also a source for continuous recording. Make sure your cameras' stream 1 resolution does not exceed 1080P at 30fps .
VIVOTEK User's Manual - 21 NVR Desktop Elements Menu Bar Desktop Shortcuts Control Center Normally the desktop defaults to the Control Center view , which provides direct access to various functional utilities such as LiveClient and Playback.
VIVOTEK 22 - User's Manual Menu Bar The menu bar contains the following menus: Menu Description Control Center As previously described, the Control Center is the main access point to major functionalities. Disk Status Disk Status provides a glimpse of Logical V olumes, Physical disk statuses, HDD status reported through S.
VIVOTEK User's Manual - 23 Chapter Two NVR LiveClient Configuration Centralized management site for all the logged in clients An NVR can also be managed using a separately-installed LiveClient on a remote PC (rev .
VIVOTEK 24 - User's Manual V AST LiveClient Functionality Server function control User account management Recording storage management Recording schedule management Recorded d.
VIVOTEK User's Manual - 25 VAST Server Activating the V AST Server V AST Server is a service program that will run automatically when your NVR system starts. The V AST server manages video recording, live view monitoring, and other related surveillance functions.
VIVOTEK 26 - User's Manual LiveClient Configuration Opening the LiveClient Interface and Logging in V AST LiveClient allows you to monitor live video from cameras managed by the NVR; it is also the main access to the server's functional control.
VIVOTEK User's Manual - 27 LiveClient User Interface Menu Bar Status Panel A B C D E G F User Name CPU Station Name (IP Address) usage Login T ime (yyyy-mm-dd hh:mm:ss) RAM Current T ime (yyyy-mm.
VIVOTEK 28 - User's Manual Quick Access Bar Some buttons will be disabled if the selected devices do not support the related functions. Live V ideo Monitoring Window The "VIVOTEK" logo is displayed where no camera has been assigned to a video cell.
VIVOTEK User's Manual - 29 Hierarchical Management T ree Station Name (IP address) Connected devices listed under the station Camera name (IP Address) Connected devices that have been assigned to.
VIVOTEK 30 - User's Manual Camera Control Panel Pan/T ilt/Zoom (PTZ) Control Panel There are two types of PTZ control: Digital (E-PTZ for megapixel cameras) and Mechanical (PTZ cameras or fixed cameras with camera control via RS-485). If the connected cameras support PTZ/E-PTZ function, the PTZ option(s) will appear on the drop-down list.
VIVOTEK User's Manual - 31 T wo Way Audio Control Panel The two way audio function allows the user to remotely communicate with people nearby the network camera. For detailed information about How to Use the T alk Panel , please refer to page 1 12.
VIVOTEK 32 - User's Manual Event Window Click View > Event W indow to insert a window showing the real-time information for event triggers. If you want to hide this window , deselect this option on the menu bar .
VIVOTEK User's Manual - 33 Instant Playback (on Remote LiveClient) Instant Playback is available on a remote LiveClient console. Check View > Instant Playback to open the window on the panel. The entries are the short recordings made from triggered events.
VIVOTEK 34 - User's Manual Prerequisites for Instant Replay: 1. The function is enabled by default, only available on a LiveClient installed on a PC. 2. There must be recorded videos of the immediate past. If the video streams from a camera were not recorded, you can not retrieve videos using the Instant Replay function.
VIVOTEK User's Manual - 35 Audio Control The audio function will be enabled if the device is equipped with an internal or external microphone. For detailed audio control settings, please refer to page 138. T o change the default Replay settings, open the Conguration > Client Settings > General Settings menu.
VIVOTEK 36 - User's Manual How to Manage Devices (Cameras) Please follow the steps below to open the Camera Management window: a. Select the station from the hierarchical management tree. b. Click Conguration > Camera Management on the menu bar (or right-click the station, then select Camera Management ).
VIVOTEK User's Manual - 37 If you want to use "HTTPS Port", please enable the HTTPs settings on the conguration page of a web console with a Network Camera.
VIVOTEK 38 - User's Manual e. Congure Recording Settings : Recording Stream: By default, the stream source of the recording stream is stream 1, if you want to change it later on, please refer to the previous page to update the camera settings.
VIVOTEK User's Manual - 39 f. The device will automatically be assigned to the default Storage Group. Deselect the item if you want to cancel this setting. g. When all settings are completed, click Insert to add the device to the station. The device will be displayed under the Camera List on the left.
VIVOTEK 40 - User's Manual Enable SVC If the camera to-be-added supports the latest SVC (Scalable Video Coding) feature, select the SVC checkbox to enable the related control. The SVC feature enables streaming of videos for multiple clients from one single set of layered IP packets.
VIVOTEK User's Manual - 41 2. Right-click on the view cell of an SVC-enabled camera. Select SVC fps adjust bar . 3. A slide bar will appear above the view cell. Click and drag the slide bar . A numeric indicator will display the current selection.
VIVOTEK 42 - User's Manual If you have multiple SVC-enabled cameras, you can enable a collective setting via the Adjust SVC level button on the tool bar . The frame rate selected here will then apply to all view cells on the V AST LiveClient console.
VIVOTEK User's Manual - 43 Update Devices Please follow the steps below to update a device via Camera Management window: a. Click Conguration > Camera Management > Update Camera on the menu bar (or right-click the device/station, then select Camera Management > Update Camera ).
VIVOTEK 44 - User's Manual Delete Devices from the Station Delete a device: Right-click the device on the device tree, then select Delete. A dialog box will pop up. Click Y es to delete the device along with the recorded data; click No to delete the device but retain the recorded data; click Cancel to cancel the delete action.
VIVOTEK User's Manual - 45 Batch Insert Cameras Batch insert is a very useful function that allows user to search, filter , and import a row of devices that are in the same LAN to an NVR station. Basic settings can also be applied to those inserted devices simultaneously .
VIVOTEK 46 - User's Manual IP with prex: Key in in the prex of the IP address to narrow down the list. Model with prex: The user can type in the prex of the model name or the complete model name of the cameras to narrow down the list.
VIVOTEK User's Manual - 47 e. When the list is ltered, you can select the cameras one by one or check Select All to add them to the batch insert list. Then click OK to nish searching. f. The selected cameras will be shown on the batch insert camera list with the camera information and the connection status.
VIVOTEK 48 - User's Manual g. At the bottom of the window , there is a eld for you to alter the camera settings including Connection Settings and Recording Settings. Y ou can apply the new settings to each camera on the list, or click Apply to All to apply the same congurations to all the cameras.
VIVOTEK User's Manual - 49 Camera Conguration The Camera Conguration function group provides immediate access to the video streaming and other settings without the need to open a web console. The function group is accessed by selecting a camera on the device tree, and right-click to select Camera Management > Camera Conguration .
VIVOTEK 50 - User's Manual Audio If audio feed is preferred, configure the audio codec type and operating mode in here. Video This tabbed window privides access to the selection of the live view stream, its compression codec, frame size, max.
VIVOTEK User's Manual - 51 Remote Focus For cameras supporting the remote focus feature, such as the FD8362E that comes with a motorized lens, this window provides finetune buttons and full-range scan fucntion to help reach the best image fo- cus.
VIVOTEK 52 - User's Manual V iew Live Videos Y ou should double-click on the target device or drag-and-drop the target device from the hierarchical management tree window to a video cell. Dual / Multiple Streams For multiple-stream devices, you can right-click on the focused view cell to select a stream.
VIVOTEK User's Manual - 53 Fisheye Display Modes : below are conceptual drawings for different display modes. 1O View (Original V iew) 180° Hemispheric 1R View (Single Regional V iew) Zoom in/out & all-direction navigation control Zoom In Zoom Out An Original oval view covers the hemisphere taken by the sheye lens.
VIVOTEK 54 - User's Manual Swipe to scroll horizontally 2P (2 Panoramic) Display mode: T wo dewarped rectangular views are placed one on top of another each showing 180 degree of panoramic view . The 2P view looks like the upper view shows the front of hemisphere, and the lower view the rear half of the hemisphere.
VIVOTEK User's Manual - 55 The various display modes require the support of D3D technologies by your display card. Most off-the-shelf display cards today support this feature. The onscreen mouse control is very agile. Therefore, use the PTZ panel for more delicate moves in a field of view .
VIVOTEK 56 - User's Manual Regional View #1 Panoramic View Regional View #3 Regional View #2 Regional View #1 Regional View #3 Regional View #2 Regional View #4 Regional View #1 Regional View #2 .
VIVOTEK User's Manual - 57 Refresh Right-click the device, then click Refresh , the camera information will be refreshed from the server . Streaming Server Right-click the station or the device and click Output Streaming URL . A .txt le with streaming URL will pop up.
VIVOTEK 58 - User's Manual Camera Settings Right-click the device, then click Camera Settings to open a brower's session to the camera. Remove Live V ideo from the Video Monitoring Window There are two ways to remove a live video from the video cell: Method 1.
VIVOTEK User's Manual - 59 How to Change the V AST LiveClient Layout Changing the Layout of the Live V ideo Monitoring Window The NVR's LiveClient supports up to 16 simultaneous video viewing on a single monitor and allows you to change the layout of the live video monitoring window based on the number of inserted devices.
VIVOTEK 60 - User's Manual For example, under the 3 x 3 layout mode, you can switch among the pages by clicking and on the quick access bar . T o arrange the content of each page, manually drag-and-drop cameras from the hierarchical device tree to the video cells on each page.
VIVOTEK User's Manual - 61 d. Back to the monitoring window , the new layout will appear under the device tree as shown below . Y ou can save up to 10 layouts. e. T o change to another layout, double-click the layout options on the hierarchical management tree, or click Layout > Choose on the menu bar to select a desired layout.
VIVOTEK 62 - User's Manual Maximize the Live V ideo Monitoring Window Single View: to maxmize a video cell to the entire live video window Double-click the video cell, or right-click the video cell and select Single View . The focused video will occupy the entire playback window as shown below .
VIVOTEK User's Manual - 63 Full Screen: Maximize the live video monitoring window to the entire screen Click Full Screen on the quick access bar or right-click the video cell and select Full Screen . In addition, you can also click View > Full Screen on the menu bar to maximize the live video monitoring window .
VIVOTEK 64 - User's Manual How to Manage Stations A standard V AST Server allows you to construct a hierarchical management system by adding more sub-stations to the root station. The NVR system can be included into a hierarchy managed by a dominating V AST server .
VIVOTEK User's Manual - 65 How to Manage User Accounts V AST on NVR allows users to apply multiple user accounts to a station with five levels of user roles: Administrator > Power User > User > Operator > Guest. Each role has dif ferent permissions listed as shown below .
VIVOTEK 66 - User's Manual Privileges User Roles Administrator Power User User Operator Guest Description Modify Directories Add, remove and rename directories Delete Camera Delete camera from t.
VIVOTEK User's Manual - 67 Manage a User Account Add a New User Account a. Select the station from the hierarchical management tree. b. Click Configuration > User Management on the menu bar (or right-click the station, then select User Management ).
VIVOTEK 68 - User's Manual Permission of the User Account Administrator is granted with all access privileges, while other user roles' permission is limited. If you want to modify the permission, please login as the Administrator to congure the settings.
VIVOTEK User's Manual - 69 If you want to remove access permission mentioned above from the account, the user will not be able to operate some functions listed in the following warning dialog. j. When completed, click Update to enable the new settings.
VIVOTEK 70 - User's Manual How to Set up Association Management The LiveClient supports association management which allows the user to configure relative event trigger notifications of the connected network devices.
VIVOTEK User's Manual - 71 T o manually enable DI/DO settings, please right-click the video cell and select Set DO to enable ( T rigger ) or disable ( Normal ) the digital output of the linked device.
VIVOTEK 72 - User's Manual How to Set up Event Management The NVR's LiveClient supports event management which allows the server to respond to particular situations (events).
VIVOTEK User's Manual - 73 Event Management Please follow the steps below to congure event management: a. Select the station from the hierarchical management tree. b. Click Configuration > Event Management on the menu bar (or right-click the station and select Event Management ).
VIVOTEK 74 - User's Manual e. The Device List window will prompt. Select one or more devices and set the Notification T ype. Depending on the trigger source, the Notication T ype will be dif ferent. Then click OK to close the window . f. The trigger source(s) will be listed on the window as shown below .
VIVOTEK User's Manual - 75 Start to record on: The sever will start to record video from selected camera(s) when an event is triggered. j. Click Add Camera to select the target camera(s). k. The selected camera(s) will be listed on the left window below .
VIVOTEK 76 - User's Manual GSM Short Message: The sever will send a short message to a GSM cell phone when an event is triggered. A GSM modem is necessary . q. Please enter the Phone Number and open GSM Settings window to set related information if necessary .
VIVOTEK User's Manual - 77 Client Notication: This function allows a notication video cell to prompt when an event is triggered. Y ou can select the size of the video cell, and select how long the view cell will stay on top of the screen.
VIVOTEK 78 - User's Manual t. When you finish schedule settings, click Next to review the detailed information of the new event settings..
VIVOTEK User's Manual - 79 u. Following is the detailed information of the new event setting. Y ou can click Back to modify the event setting or click Finish to close the window . v . Following is an example of an enabled event. Y ou can click New to set up more events or click Close to exit the window .
VIVOTEK 80 - User's Manual How to Congure the Station General Settings Select the target station from the hierarchical management tree, then click Configuration > Station Settings > General Settings on the menu bar (or right-click the sta tion on the hierarchical management tree and select Station Settings > General Settings ).
VIVOTEK User's Manual - 81 Reboot Settings Y ou can schedule a system reboot every day at a specic time in a day or in days within a week. Select the checkbox and select a time from the pull-down list. Click OK when the conguration is done.
VIVOTEK 82 - User's Manual How to Congure Station Network Settings Select the target station from the hierarchical management tree, then click Configuration > Station Settings > Network Settings on the menu bar (or right-click the station on the hierarchical management tree and select Station Settings > Network Settings ).
VIVOTEK User's Manual - 83 How to Edit Recording Stoage By default, all devices (cameras) are assigned to the default recording storage. Y ou can manually remove a device from the default recording storage. However , only those devices which belong to a recording storage can produce recorded media les.
VIVOTEK 84 - User's Manual Default Storage Group Settings The following example shows the default storage group settings. Y ou can click Rename to modify the group name or click Delete to remove the default settings. d. The default recording path is E:Recording .
VIVOTEK User's Manual - 85 e. Add Local Path: Click to add another recording path on your local computer . A Select Path dialog will pop up as shown below . When all settings are complete, click OK to enable the settings, or click Cancel to discard the settings.
VIVOTEK 86 - User's Manual g. T o modify the settings of a path, select the path from the list, then click Change settings to modify . h. T o delete a path, select the path from the list and click Delete path . A warning dialog box will pop up as shown below .
VIVOTEK User's Manual - 87 Add New Storage Group(s) If you want to add a new storage group, click Add to give a name to the new storage group, which will be displayed on the drop-down list.
VIVOTEK 88 - User's Manual How to Edit Recording Schedules After editing recording storage settings, you can begin to edit recording schedules for the devices in a storage group. By default, all devices are assigned to the default recording schedule (Please refer to the default time frame settings on page 92).
VIVOTEK User's Manual - 89 Edit Schedule List Please follow the steps below to set up the recording schedules: a. Select the V AST station from the hierarchical device tree.
VIVOTEK 90 - User's Manual Load/Save Schedule T emplates g. If you have a schedule template with time frame settings, you can upload it to facilitate the scheduling process. Click Load T emplate , and a Load File dialog box will pop up. Select the template le and click Open to load.
VIVOTEK User's Manual - 91 Edit Camera List Please follow the steps below to assign a device to a recording schedule: a. Select a recording schedule on the schedule drop-down list. b. By default, all devices under the station are assigned to the Default Schedule .
VIVOTEK 92 - User's Manual Edit T ime Frame List Default T ime Frame: Weekly (Day-based), Mon.~Sun., 24-hour , continuous recording Click Edit to open the Default T ime Frame settings page as shown below .
VIVOTEK User's Manual - 93 Add New T ime Frames Please follow the steps below to add new time frames to a schedule: a. Select a recording schedule from the drop-down list. b. Click Add to open the Time Frame Settings window . c. Enter a name for the new time frame.
VIVOTEK 94 - User's Manual h. If you want to add additional time frames to the schedule, repeat the steps above. i. Close the window when you nish the time frame settings. j. Back to the Recording Schedule Settings window , the new time frame will be displayed on the T ime Frame List.
VIVOTEK User's Manual - 95 The following diagrams show the frame rate variations using two different recording modes: 1. Continuous recording + Activity adaptive recording (helps save bandwidth and storage) 2. Event recording The Concept of Repeat Frequency V AST offers the following types of repeat frequency .
VIVOTEK 96 - User's Manual Repeat Frequency: Daily Setting T o set up daily repeat frequency , please congure the following items: Daily time segments, applicable period of time, and repeat time interval. Set up daily time segments Y ou can specify several time segments within a day .
VIVOTEK User's Manual - 97 2. Fill in the precise Start T ime and End Time: a. Directly enter the value in the Start T ime and End Time fields, then click Add . b. The corresponding red timeline bar will automatically appear as shown below . Delete time segments: Choose either step 1 or step 2 to set up 1.
VIVOTEK 98 - User's Manual Set up applicable period of time For repeat frequencies, you can set up the applicable date and period of time for the time frame. a. Specify the start date and time in the Start eld. A calendar date selector will appear when you click on the drop-down list of date .
VIVOTEK User's Manual - 99 Repeat Frequency: Weekly Setting (Day-based) T o set up Weekly (Day-based) repeat frequency , please configure the following items: Daily time segments, applicable days within a week, applicable period of time, and repeat time interval.
VIVOTEK 100 - User's Manual Repeat Frequency: Weekly Setting (Periods in a week) T o set up Weekly (Periods in a week) repeat frequency , please configure the following items: Time segments within a week, applicable period of time, and repeat time interval.
VIVOTEK User's Manual - 101 2. Fill in a precise Start T ime and End Time: a. Directly select a day and enter the value in the Start T ime and End Time fields, then click Add . b. The corresponding red timeline bars will automatically appear as shown below .
VIVOTEK 102 - User's Manual Repeat Frequency: Monthly Setting (Day-based) T o set up Monthly (Day-based) repeat frequency , please configure the following items: Daily time segments, applicable date(s) of a month/ day(s) of a week, applicable period of time, and repeat time interval.
VIVOTEK User's Manual - 103 Repeat by date(s) of a month: Select date(s) from the calendar , and it will be displayed on the right blank as shown below . The following example refers to the 1 st ~ 5 th day of a month. Repeat by day(s) of a week: Select day(s) from the calendar , and it will be displayed on the right blank as shown below .
VIVOTEK 104 - User's Manual Repeat Frequency: Y early Setting (Day-based) T o set up Y early (Day-based) repeat frequency , please configure the following items: Daily time segments, applicable date(s) of a year/ day(s) of a week, applicable period of time, and repeat time interval.
VIVOTEK User's Manual - 105 Repeat by date(s) of a year: Select date(s) from the calendar , and it will be displayed on the right blank as shown below . The following example refers to the 1 st ~ 5 th day of a year . Repeat by day(s) of a week: Select day(s) from the calendar , and it will be displayed on the right blank as shown below .
VIVOTEK 106 - User's Manual How to Manually Begin /Stop Recording By default, all devices are assigned to the default recording storage and default recording schedule. Therefore, once you included a camera into the NVR's conguration, the V AST Server will begin to record live video according to the default recording schedule.
VIVOTEK User's Manual - 107 How to Edit Scheduled Backup Settings V AST LiveClient supports scheduled backup which allows the user to back up the recorded data in another disk. Please follow the steps below to enable scheduled backup settings: a.
VIVOTEK 108 - User's Manual Setup Backup Schedule f. Fill in a desired time and click >> to add the backup time. Please note that the backup time interval must not be shorter than 1 hour . For example, 23:40 and 00:15 are not allowed to exist simultaneously .
VIVOTEK User's Manual - 109 How to Congure Station Server Settings V AST LiveClient supports Server Settings including DDNS Settings, Network Storage Settings, and SMTP Settings.
VIVOTEK 1 10 - User's Manual Network Storage Server Settings The V AST Server allows user to set up network storage path(s) for recorded les. Please follow the steps below to add a new network storage path. a. Click Add to open the Network Host Window .
VIVOTEK User's Manual - 1 1 1 SMTP Settings V AST Server allows user to set up SMTP Server to send mail alert when event triggers. For more information about how to set up event management, please refer to page 72. Please follow the steps below to congure the SMTP Server: a.
VIVOTEK 1 12 - User's Manual How to Use the T alk Panel V AST LiveClient supports the two way audio function which allows the user to communicate with people around the network camera.
VIVOTEK User's Manual - 1 13 An icon with the camera name will be displayed in the T alk Panel. Please note that you cannot T alk and Play Sound at the same time. When you are talking or playing sound, you cannot add other cameras to the T alk Panel.
VIVOTEK 1 14 - User's Manual Remove a Camera from the T alk Panel Remove a camera Drag a camera from the T alk Panel and drop to the hierarchical management tree window as shown below . The camera icon will disappear . Remove all cameras Click , all cameras in the T alk Panel will be removed.
VIVOTEK User's Manual - 1 15 How to Congure E-map Settings V AST LiveClient supports in tuitive E-map function which allows users to upload E-maps for overall devices management. Click System > E-map to open E-map Settings Page: Upload an E-map Click to search for E-map(s) to upload.
VIVOTEK 1 16 - User's Manual E-map Settings Page (V iew Mode) Double-click an E-map on the tree, it will be displayed on the E-map window as shown below . There are two operation modes of E-map set tings page: "View Mode" and "Edit Mode".
VIVOTEK User's Manual - 1 17 Quick Access Bar Status Panel Icon Function Description Zoom in Zoom in the E-map Zoom out Zoom out the E-map Default size Adjust the E-map to default size Upload Upl.
VIVOTEK 1 18 - User's Manual E-map Settings Page (Edit Mode) A. Menu bar B. Quick access bar C. E-map list tree D. Device tree E. Map preview F . E-map window G.
VIVOTEK User's Manual - 1 19 Device Management Please follow the steps below to edit an uploaded E-map. a. Double-click the E-map you want to edit, it will be displayed on the E-map window . b. Use Quick Access Bar to adjust the size of the E-map.
VIVOTEK 120 - User's Manual Live V iew Dialog Settings Click System > E-map Settings to open the E-map Settings dialog, then you can choose to Open Live View Dialog or to Send to Single V iew when you double-click the device deployed on the E-map.
VIVOTEK User's Manual - 121 E-map Link After completing device deployment on your E-map, you can link an E-map to another E-map. Please follow the steps below to congure E-map link: a. Select a map you want to edit and enter Edit Mode . b. Drag-and-drop another E-map onto current E-map.
VIVOTEK 122 - User's Manual d. Right-click the blue frame to Resize or Delete it. Click Resize , some nodes will appear around the blue frame. Then Y ou can drag the nodes to move the position, rotate the direction, adjust the size, and change the shape.
VIVOTEK User's Manual - 123 h. T est the web links. Click on the Quick Access Bar to switch to view mode. Double-click the blue frame on Map1, it will automatically switch to map 2. Then double-click the blue frame on Map2, it will automatically switch to map3.
VIVOTEK 124 - User's Manual How to Congure Client Settings In Client Settings, you can configure Snapshot Settings, Recording Settings, View Settings, General Settings, Joystick Settings, Proxy Settings, and PiP Settings. Snapshot Settings Please follow the steps below to congure snapshot settings: a.
VIVOTEK User's Manual - 125 If you uncheck Generate a le name automatically , the Save le dialog box will pop up when you take a snapshot. The le name prex will automatically be displayed in the Save File dialog box. T aking a Snapshot Please follow the steps below to take a snapshot of the live video stream: a.
VIVOTEK 126 - User's Manual Recording Settings The V AST Server allows you to record the live video in EXE, 3GP , or A VI format to your storage folder . T ype 1: Record to EXE Record video as an EXE le. The EXE is not only a media le but also a built-in media player .
VIVOTEK User's Manual - 127 d. If you check "Record with only standard codec", the video from old models (VIVOTEK 6000-series products) using H.263 codec will not be recorded. f. Click OK to enable the settings. T ype 3: Record to A VI Record video as an A VI le, which uses the popular codecs pre-installed in the Windows OS.
VIVOTEK 128 - User's Manual d. Select the frame rate/ per second. e. T o modify the video compression settings, click Video Compression Setting to open the A VI V ideo Compression Setting window . Select the desired video compression algorithm, compression quality , key frame intervals, and data rate in the corresponding elds.
VIVOTEK User's Manual - 129 Record an EXE/3GP/A VI File Please follow the steps below to record an EXE/3GP/A VI le of a live video stream: a. Select a video cell or a device from the heirarchical management tree which you want to record to media le.
VIVOTEK 130 - User's Manual Built-in Media Player--EXE Below is the icon of footages saved as EXE les. Double-click on it, the recorded video will be played automatically as shown below . If you installed LiveClient on your PC, you may also open the built-in Media Player (VMSMediaPlayer .
VIVOTEK User's Manual - 131 The function menu of the built-in media player are displayed as shown below: The built-in player is able to playback 3GP les. The built-in player is able to save 3GP les as EXE les. The built-in player is able to save EXE les as 3GP les.
VIVOTEK 132 - User's Manual V iew Settings This section allows you to set the display mode of a video cell, including Display Location, Date and time Format, V ideo Display Mode, and Font Settings . When you change the settings, the sample window will change accordingly for you to preview the settings.
VIVOTEK User's Manual - 133 Date and T ime Format Same as local computer: Select this option and then the date and time format will synchronize with the local computer . Specify: Select a desired format for the date and time from the drop-down list.
VIVOTEK 134 - User's Manual General Settings This section allows you to congure the System Settings and Rotation Settings . System Settings Auto login after logging in to operating system: If you check this option, V AST LiveClient will automatically login after you login to Windows without filling in the user name and password.
VIVOTEK User's Manual - 135 Event Settings Enable live event notification: Select this option to activate real-time event notification. For example: the event notification of DI/O status on t.
VIVOTEK 136 - User's Manual Enable auto stream size : The Auto Stream Size feature dynamically adjusts the stream sizes of video feeds from network cameras in order to reduce CPU load and bandwidth consumption.
VIVOTEK User's Manual - 137 Enable Instant Replay on video cell (on a LiveClient installed to a PC): When enabled, a small Replay icon will be available on each view cell. One pre-condition is that the video stream must be currenly being recorded to the NVR sysm.
VIVOTEK 138 - User's Manual Joystick Settings This section explains how to remotely control the network cameras using a USB joystick. Enable Joystick Connect to the USB plug of the joystick to a USB port on your computer .
VIVOTEK User's Manual - 139 Buttons Conguration In Button Conguration window , the left column shows the actions you can assign, and the right column shows the functional buttons and assigned actions. The number of buttons may differ from dif ferent joysticks.
VIVOTEK 140 - User's Manual c. The Assigned Action will appear beside Button 1 in the right column as shown in the following diagram. Note that a button can only be assigned with an action. If you want to modify the settings, select the action on the list and click Clear Selected .
VIVOTEK User's Manual - 141 e. Click OK to save the settings or click Cancel to discard the settings. If you want to assign Preset actions to your joystick, the preset locations should be set up in advance. If your joystick is not working properly , it may need to be calibrated.
VIVOTEK 142 - User's Manual PTZ/ E-PTZ Function In addition to using the PTZ control panel, you may also control the rotation handle on the joystick with ease. Pan/T ilt : Move the rotation handle of the joystick; you can pan the camera to the desire position.
VIVOTEK User's Manual - 143 How to Use PiP (Picture-in-Picture) PiP (Picture-in-Picture) is an intuitive function for user to simultaneously view a Global View and ROI (Region of Interest) for live monitoring. The digital zoom in function can only focus on the interested area and represent the details of megapixel video.
VIVOTEK 144 - User's Manual ROI (Region of Interest) The ROI frame can be resized and moved in any direction across the global view window . The working theory is similar to the e-PTZ function. Digital Zoom In Through digital zoom in, the live view window will be lled with the zoomed in ROI image.
VIVOTEK User's Manual - 145 How to Congure V ideo Enhancement The LiveClient allows you to enable post-image enhancement and defog for video live view . Basic Image Adjustment This function allows you to configure basic image adjustment including Brightness, Contrast, Saturation, and Hue.
VIVOTEK 146 - User's Manual g. Back to the main page, a “VE” text string will also appear at the bottom right of the video cell and the new prole will also appear and be selected on the popup menu as shown below .
VIVOTEK User's Manual - 147 Defog This function allows you to congure post-image defog. Apply a Preset Defog Prole Please follow the steps below to set post-image defog settings: a.
VIVOTEK 148 - User's Manual d. The string of the selected prole will be selected as shown below . A “VE” text string will also appear at the bottom right of the video cell. Create a New Defog Prole e. Click Settings on the popup menu to open the Prole Settings window .
VIVOTEK User's Manual - 149 f. Adjust the values of Block Size, Strength, and Threshold. Y ou can preview the image from the right window . A “VE (V ideo Enhancement)” text string will also appear at the bottom right of the preview window .
VIVOTEK 150 - User's Manual How to Search for a Device on the Hierarchical Device T ree This function allows you to conveniently search for an inserted device, which is useful when many devices have been inserted. Please follow the steps below to nd a device on the camera list: a.
VIVOTEK User's Manual - 151 How to Lock LiveClient for Security Concerns If you are away from your computer , for security reasons, we suggest you lock the program. When LiveClient is locked, the user must ll in the correct password to unlock and access the program again.
VIVOTEK 152 - User's Manual Lauch Playback Click on Launch Playback to directly open the Playback utility . Note that the LiveClient utility is still running in the background when you return to the Control Center . Second V iew This function is only available on a LiveClient running a PC that has 2 monitors.
VIVOTEK User's Manual - 153 Chapter Three NVR Playback Configuration Activating V AST Playback and Logging in to a Server V AST Playback allows you to search and playback recorded media data from the NVR system.
VIVOTEK 154 - User's Manual NOTE: If your network environment need to set up proxy , click More >> to extend the login window , then click Proxy Setting to open the dialog.
VIVOTEK User's Manual - 155 V AST Playback User Interface A. Menu bar B. Quick access bar C. Query panel (Browsing / T ime search /Event search / Log viewer) D.
VIVOTEK 156 - User's Manual Quick Access Bar Some buttons will be disabled if the selected device does not support those functions. Recorded V ideo Playback Window The "VIVOTEK" wallpaper is in place if no camera has been assigned to the video cell.
VIVOTEK User's Manual - 157 Synchronous Playback Click to enable synchronous playback for multiple channels Query Panel-- Browsing Page Dates with recorded video clips Devices listed under the NV.
VIVOTEK 158 - User's Manual Query Panel--T ime Search Page The Time Zone setting is automatically synchronized with that on the NVR station. Select station(s)/ device(s) that you want to search f.
VIVOTEK User's Manual - 159 Audio Control The audio function will be enabled if the device is equipped with an internal or external microphone. Please follow the steps below to adjust the volume or turn the audio on/off for a video stream: T o turn off the audio (Mute Mode) a.
VIVOTEK 160 - User's Manual How to Change the Playback Layout Changing the Layout of the Recorded V ideo Playback Window VIVOTEK V AST Playback supports up to 16-CH simultaneous recorded video playback on a single monitor and allows you to change the layout of the recorded live video playback window based on the number of inserted devices.
VIVOTEK User's Manual - 161 Maximize the Recorded V ideo Playback Window Single View: to maxmize a video cell to the entire video playback window Double-click the video cell, or right-click the video cell and selec Single View . The selected video will expand to ll the entire Playback window as shown below .
VIVOTEK 162 - User's Manual Full Screen: to maxmize the video playback window to the entire screen Click Full Screen on the quick access bar or right-click the video cell and select Full Screen . In addition, you can also click View > Full Screen on the menu bar to maximize the recorded video playback window .
VIVOTEK User's Manual - 163 How to Backup Recorded V ideo In addition to the Schedule Backup function of V AST LiveClient introduced on page 61, the Playback utility can back up recorded video clips from the local database . Please open the Browsing page and follow the steps below to backup recorded video: a.
VIVOTEK 164 - User's Manual T o backup part of the recorded video of the day: Select the date and choose the video clip(s) from video clip window . Then right-click the selected option(s) and click Backup . Note: Use the combination of the Shift key and left mouse click to select multiple video clips.
VIVOTEK User's Manual - 165 How to V iew Backup Files The V AST Playback also allows users to playback backup les, including Schedule Backup by V AST LiveClient and Recorded Data Backup by V AST Playback. Please follow the steps below to view backup les: a.
VIVOTEK 166 - User's Manual 1. The Backup function does not take place between the NVR system and a PC running the Playback utility . 2. If you want to playback the backup les from the local database, you can also click Working Ofine in the Login Window without the account information.
VIVOTEK User's Manual - 167 Model-specic Functions (FE Series Fisheye) The V AST Playback program offers model-specific functions through a right-click menu. For example, if you playback a video clip made from an FE8171V or FE8172 series sheye camera, a right-click on the playback screen will bring up the Display mode options.
VIVOTEK 168 - User's Manual T o congure the SVC-related feature: 1. Right-click on the playback window of an SVC-enabled camera. Select SVC fps adjust bar . 2. A slide bar will appear above the view cell. Click and drag the slide bar . A numeric indicator will display the current selection.
VIVOTEK User's Manual - 169 How to Search for a V ideo Clip T aken at a Specic T ime Please follow the steps below to use Time Search function: a. Open the Time Search page. b. Select the target station(s)/device(s) that you want to search for video clips.
VIVOTEK 170 - User's Manual How to Add a Bookmark Bookmark is a convenient tagging function that allow your to pinpoint and extract a 20-second video clip from out of a video recording. When you see somehting of your interest while browsing through a recorded video, 1.
VIVOTEK User's Manual - 171 How to Search for Events The V AST Playback program offers users an intuitive event search engine for retrieving video clips from the database of recorded videos based on different search criteria such as motion, IV A, or DI events.
VIVOTEK 172 - User's Manual Select Event Category The following introduces the event search categories: All Events , All Motion Events , All IV A events , All DI Events , Named DI Events, PIR, T ampering, and T amperature . Y ou can also add or remove customized events from the list.
VIVOTEK User's Manual - 173 Event Category- All IV A events If you select the All IV A events category , all detected IV A events will be included in the search. Cameras with embedded intelligent video content analysis are capable of detecting IV A events such as moving objects, loitering, and tamper detection.
VIVOTEK 174 - User's Manual Event Category- Named DI Events This category allows you to select only Named DI Events --the DI device which you have renamed in the LiveClient. Please refer to Association Management on page 70 for more information about how to rename DI device.
VIVOTEK User's Manual - 175 Start Event Search After you specify all of the search criteria mentioned above, select or deselect the Display in new result list checkbox and click Search to begin event search. If Display in new result list is unchecked, all search results will be displayed on the original event list window as shown below .
VIVOTEK 176 - User's Manual Backup the Event V ideos Please follow the steps below to backup the evnet videos on the results list: a. Select the video clips you want to backup. Y ou can select more than one video clip using the Shift key . b. Right-click the selected video clips and click Backup .
VIVOTEK User's Manual - 177 How to Search for a Bookmark Please follow the steps below to use Bookmark Search function: a. Click on the tabbed menu to open the Bookmark Search page. b. Select the cameras which have video clips you have placed bookmarks on.
VIVOTEK 178 - User's Manual How to Search Logs The V AST Playback program offers a convenient log engine for searching all local logs based on different search criteria such as log category , log type, and log level. The search results will be displayed in the log viewer window along with the detailed log history .
VIVOTEK User's Manual - 179 Select Log Category/Log T ype/Log Level The following table shows the breakdown of log category , level, and type. The search results will be different according to your selections.
VIVOTEK 180 - User's Manual Search All Local Logs Search Login History Select Login History from the log category eld and click the Search button below , the search results, including all login logs, will be displayed on the Login History page.
VIVOTEK User's Manual - 181 Search Login Activities This function allows you to search the operations the user performed during the login period of time. Y ou can search for login activities on the Local Logs or Login History page. Search Login Activities on the Local Logs page: a.
VIVOTEK 182 - User's Manual d. The search results of the login activities will be displayed on the Login Activities page as shown below . When you select All in the Log Level eld, the search results will include all log levels.
VIVOTEK User's Manual - 183 How to Congure Client Settings On Client Settings, you can congure Snapshot Settings, Export Settings, View Settings, Proxy Settings, and General Settings. It allows you to save snapshots and media files on the local computer .
VIVOTEK 184 - User's Manual Export an EXE/3GP/A VI File Please follow the steps below to convert part of an EXE/3GP/A VI le of recorded video: a. Playback a video clip from which you want to export a media le. b. Set a period of time. Move the timeline slider bar to the desired start time and click Marker I .
VIVOTEK User's Manual - 185 V iew Settings This section allows you to set up the display mode of video cell. For detailed information about View Settings , please refer to page 132. Proxy Settings Please refer to page 142 for detailed illustration.
VIVOTEK 186 - User's Manual How to Lock V AST Playback for Security Concerns If you happen to be away from your computer , for security reasons, we suggest you lock the program. When V AST Playback is locked, the user must enter the correct password to unlock and access the program again.
VIVOTEK User's Manual - 187 Chapter Four Auxiliary Utilities In addition to LiveClient and Playback, the NVR system comes with a variety of auxiliary utilities including: Utility Description Setup Wizard The Setup Wizard has been described in Chapter One Service Services enables you to restart or stop the embedded NVR server (V AST server).
VIVOTEK 188 - User's Manual Service Chances are you may need to stop and restart the embedded V AST server . On occasions such as stopping a recording task, server reported errors, or after you update the software components of the V AST server , you can manually stop and then restart the service.
VIVOTEK User's Manual - 189 T o import a previously saved conguration: a. Click Import previous settings. b. Use the browse button to locate a conguration bin le. c. Click open. A message prompt will appear warning you about the replacement of current settings.
VIVOTEK 190 - User's Manual Installation Wizard 2 This is the same utility that comes with every VIVOTEK's network camera. Y ou can use it to scan the local netwo rk for all VIVOTEK's network camers, NVR systems, and video se rvers. Please refer to cameras' software CD for its operation manual.
VIVOTEK User's Manual - 191 Shepherd The Shepherd is handy in duplicating one single camera's configuration to multiple cameras. In this way , you do not need to open web consoles with individual cameras for a multiple times.
VIVOTEK 192 - User's Manual i. A warning message will remind you of the IP address. If you configured a static IP on the source camera, it is recommended to change it to the automatic IP address setting. j. A progress bar will appear on the screen.
VIVOTEK User's Manual - 193 Upgrade Software upgrade packages will be released on VIVOTEK's support website. Y ou can download these les, and double-click the Upgrade shortcut to open the utility . Please consult VIVOTEK's technical support and the release note before applying upgrades.
VIVOTEK 194 - User's Manual File Manager The File Manager provides access to the file browser window of the embedded operating system. By default, the recorded video les should be recorded to the E: volume, and you can use the Export EXE and other similar functions in the Playback utility to extract video clips to the E: volume.
VIVOTEK User's Manual - 195 Disk Status Click on the tabbed menu on the desktop to enter the Disk Status window . The rst information is the Logical volume working status. The second window displays the working status of individual disk drives, including model name, capacity , S.
VIVOTEK 196 - User's Manual Y ou may perform Quick T est or Complete T est to acquire the current integrity status. The test utility then polls the hard drives for statuses of the key attributes of its working conditions. The Quick test checks the electrical and mechanical performance as well as the read performance of the disk.
VIVOTEK User's Manual - 197 System Status System Status states the current working status and system time..
VIVOTEK 198 - User's Manual Appendix A Rebuilding a RAID Volume If a drive fails, the failure will be indicated by the system fault LED or the Disk Status panel. If a disk drive fails in a RAID5 volume, rst locate the faulty drive in the Disk Status panel, remove the faulty drive with a drive of the same capacity and rotation speed.
VIVOTEK User's Manual - 199 Once you replace the faulty drive with a new one, an automatic rebuild will begin, and its progress will be indicated by a status bar as shown below . The process will take hours depending on the sizes of your disk drives, e.
VIVOTEK 200 - User's Manual Appendix B ONVIF Support Prerequisites: 1. Y ou may connect cameras made by other manufacturers to the syste m as long as their firmware supports the ONVIF . Y ou may upgrade their rmware if the newer rmware supports ONVIF .
VIVOTEK User's Manual - 201 6. Visual indication on user interface: A camera on the device tree A camera recording to the system On the insert camera window , an ONVIF brand option is added.
VIVOTEK 202 - User's Manual T echnical Specications All specications are subject to change without notice. Copyright © 2013 VIVOTEK INC. All rights reserved. Ver 1.0 Distributed by: VIVOTEK INC. 6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.
デバイスVivotek ND4801の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Vivotek ND4801をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVivotek ND4801の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Vivotek ND4801の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Vivotek ND4801で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Vivotek ND4801を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVivotek ND4801の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Vivotek ND4801に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVivotek ND4801デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
