VTechメーカーerisbusinesssystem 4-line office phones main consoleの使用説明書/サービス説明書
ページ先へ移動 of 130
Go to businessphones.vtech.com to register your product for enhanced warranty support and latest VT ech product news. UP416 4-Line Offi ce Phones Main Console User’ s manual.
Congratulations on your purchase of this VT ech product. Before using this VT ech product, please read the Important safety information . For customer service or product information, visit our website at businessphones.vtech.com or call 1 (800) 595-9511 .
i This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury , fire, or electric shock. Safety information Read and understand all instructions in the user’s manual.
ii Especially about cordless telephones Electrical power: The telephone base must be connected to a working electrical outlet. The electrical outlet should not be controlled by a wall switch. Calls cannot be made from the handset if the telephone base is unplugged, switched off or if the electrical power is interrupted.
iii Parts checklist Y our telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary .
iv Table of contents Getting started Console overview ..................................... 1 Console screen icons ............................... 4 Alert tones and lights ................................ 5 Alert tones ................................
v Options while on calls ............................ 50 Call waiting .......................................... 50 V olume control .................................... 50 Mute .................................................... 50 T emporary tone dialing .
vi Announcement .................................... 84 Night mode .......................................... 85 Record the auto attendant announcement .................................... 85 Set the start and end time of auto attendant announcement .
1 MENU/SELECT Press to enter the menu. While in the menu, press to select an item or save an entry or setting. • • Navigation keys While in menus, press or to scroll through the menus, highlight items or change settings. Press / SKIP to enter the highlighted item, or press / REPEAT to return to the previous menu.
2 AUTO REDIAL Press to view the last 10 numbers dialed ( page 55 and page 57 ). • One-touch keys Press to dial the desired one-touch number ( page 66 ). • Directory card T o write names on the directory card, follow the steps below: Pull out the directory card.
3 Main menu The > symbol highlights a menu item. Main menu Ringers ( pages 38- 39 ) Set Date/T ime ( page 40 ) One T ouch ( pages 64- 67 ) Phone Settings ( pages 41- 46 ) System Setup ( pages 29- 37 ) Registration ( pages 23- 27 ) Customer Support ( page 47 ) Using menus Press MENU/ SELECT to show the main menu.
4 Telephone lines -On when this console is selected under the corresponding line group setting. Ringer off - On steadily when the ringer volume is set to OFF . Headset - On steadily when using a corded headset. Speakerphone - On steadily when using the speakerphone.
5 Getting started Alert tones and lights Alert tones One beep Y ou have set the hold reminder on. -OR- The telephone is recording a memo. -OR- Y ou have set the message alert tone on. -OR- There is an incoming call waiting. Lights MESSAGE WAITING Flashes when there are new private or central messages.
6 This UP416 is the console of a 4-line telephone system. It is expandable to a maximum of 15 UP406 desksets, a UP407 cordless handset and a VT ech IS6100 cordless headset. Expanding your system requires you to connect and register each new device first (see pages 23 - 26 ).
7 The UP416 package includes only the console. You have to purchase UP406 deskset, UP407 cordless handset, and IS6100 cordless headset separately to expand your system. To order them, visit our website at businessphones.vtech.com or call 1 (800) 595-9511 .
8 Getting started Planning your system Use the existing Ethernet wall jack: Use the PC port on the console as an Internet pass-through. Unplug your Ethernet cable of your computer from the existing Ethernet wall jack.
9 Getting started Planning your system Method 2: Install the console as a stand-alone telephone Y ou can install the console without connecting it to UP406 desksets via an Ethernet network. Y ou must install and set up the UP416 console first before expanding your system with UP407 cordless handset or IS6100 cordless headset.
10 Install the console close to the telephone jacks, an Ethernet wall jack (if necessary), and a power outlet not controlled by a wall switch. The telephone can be placed on a flat surface or vertically mounted on the wall ( pages 18- 22 ).
11 Plug the end of the coiled handset cord into the jack on the left side of the telephone. 1. Lift the kickstand as the arrows indicate below to release it from the groove. There are seven pairs of grooves designed to hold the console at different angles for optimum visibility .
12 Getting started Console installation Connect the telephone lines, Ethernet cable (if necessary) and power adapter . See the illustration on the next page to connect to four single-line wall jacks; or see page 14 to connect to two 2-line wall jacks.
13 Getting started Console installation Option 1: Connect to four single-line wall jacks NOTES: Use only the power adapter supplied with this product. T o order a replacement power adapter, visit our website at businessphones.vtech.com or call 1 (800) 595-9511 .
14 Option 2: Connect to two 2-line wall jacks Getting started Console installation Use only Supplied Adapter L4 L3/4 L2 L1/2 5.1 Router Line 3/4 Line 1/2 Plug the larger end of the console power adapter into an electrical outlet not controlled by a wall switch.
15 Getting started Console installation After the console is powered up, it takes at least one minute to start up the system and the screen displays booting.... during startup. The screen displays Is this Console going to register UP406 Desksets? ‘SELECT’: Yes ‘CANCEL’: No .
16 For installation with use of UP406 deskset in the system - set static IP Instructions on this page are for users to enter static IP to set up the console, due to a failure in obtaining IP from the Ethernet switch or router automatically .
17 Getting started Console installation (stand-alone telephone) This UP416 console can be used as a stand-alone telephone without connecting it to UP406 desksets via an Ethernet network. Follow the steps below to set up the console if you do not connect it to an Ethernet network.
18 Lift the kickstand as indicated by the arrows below to release it from the grooves. 3. To mount the console on the wall Unplug the power adapter from the outlet, the telephone line cords from the wall jacks (or DSL filters), and the Ethernet cable from the Ethernet switch or router .
19 Getting started Wall mount installation Snap the kickstand into the outermost groove until it locks into place. 4..
20 Getting started Wall mount installation Line 1/2 Line 2 Line 3/4 Line 4 Router Install the wall mount bracket to the console as shown below . Insert the upper tabs of the mounting bracket into the upper slots at the back of the console.
7. Align the upper wall mounting hole on the back of the console with the upper tab of the standard wall plate. Make sure the lower wall mounting hole on the mounting bracket also aligns with the lower tab of the standard wall plate. Push the console down until it clicks securely in place.
Wall mount to tabletop installation T o change the console from the wall mount position to tabletop position, follow the steps below . 1. If the telephone line cords and power adapter cord are bundled, untie them first. 2. Push the console up to remove it from wall.
23 Y our telephone can support up to 15 UP406 desksets. The desksets must be connected to the console before use. Y ou must connect each deskset separately . Make sure your deskset is installed properly . Refer to the UP406 deskset user’s manual for details.
24 To connect a deskset to your UP416 console (continued) The deskset screen displays Starting... It takes a while for the system to finish the startup. The deskset enters the idle screen when the startup is done. Lift the handset. If you hear a dial tone, the connection was successful.
25 Y ou can add a cordless handset ( UP407 , purchased separately) to your console. The cordless handset must be registered with the UP416 console before use. When first purchased, the handset shows Choose Handset in Registration at base menu. Put handset on cradle to register.
26 Y ou can use this console handsfree when you register a DECT 6.0 cordless headset (VT ech model IS6100) to the console. Y ou can only register one cordless headset to the console. Make sure the headset is charged before use. Refer to the user’s manual of the cordless headset for details.
27 If you have a registered handset and/or headset, and need to replace one of them or both, you will have to deregister both devices first, then register each device to the deskset separately . Please read all the instructions on this page before beginning the deregistration process.
28 Y ou can use this console handsfree when you install any industry-standard 2.5mm corded telephone headset (purchased separately). Plug a 2.5 mm headset into the HEADSET jack ( ) on the side of the console. Side view of the console NOTE: The HEADSET button on the console controls only the corded headset.
29 Menu settings Use this menu to change the telephone system settings. Press MENU /SELECT when in idle mode (when the console is not in use) to enter the main menu. Press or to scroll to the feature to be changed. The > symbol indicates the selected menu item.
30 Getting started System setup Release extension number Y ou have to release an extension number that is already being used from the telephone system to make it available for other desksets.
31 Getting started System setup Prime line Use this feature, also known as automatic line selection, to choose which line is automatically selected each time you make an outside call. If you select Auto , the console selects any available telephone line starting from Line 1.
32 Getting started System setup Line group Y ou can set an extension or several extensions to receive the incoming calls from a specific telephone line. Other non-selected extensions will not ring when there is an incoming call from that specific line.
33 Getting started System setup Network setup The console must have an IP address locating its connection with the Ethernet switch or router . Y ou can set the console to obtain the IP from a DHCP server automatically or assign a specific IP on your own.
34 Getting started System setup Network setup (continued) If you want to switch from Auto set IP to Set static IP , you have to disable the Auto set IP setting first. To disable Auto set IP: When the console is idle, press MENU /SELECT . Press or to scroll to System Setup , then press MENU/ SELECT or /SKIP .
35 Getting started System setup Network setup (continued) Press MENU/ SELECT to proceed. The screen displays Subnet mask: XXX.XXX.X.X. Use the dialing keys to enter a specific subnet mask. Press DELETE to delete a character . Press # to add a dot. Press /REPEAT or /SKIP to move the cursor to the left or right.
36 Getting started System setup Discovery method Use this feature to change the connection of the console if you cannot connect an existing deskset to a newly purchased console, or when you changed to a different router . By default, the discovery method is set to Mode B.
37 Getting started System setup Network info Use this feature to view the information of the IP address, subnet mask, router/ gateway , DNS servers, and DHCP server of this console. To check the network information: When the console is idle, press MENU /SELECT .
38 Ringer volume Use this feature to set the ringer volume to one of six levels or turn the ringer off. When the ringer is of f, the icon appears on the console screen. The UP416 console stores the volume setting for all lines. When the console is idle, press MENU /SELECT .
39 Telephone settings Telephone setup Ringer tone Use this feature to choose one of the ten ringer tones for incoming calls. Y ou can choose different ringer tones for different lines so you can easily identify which line is calling. When the console is idle, press MENU /SELECT .
40 Telephone settings Telephone setup Set date/time The answering system displays the date and time of the message while playing messages. Before using the answering system, set the date and time as follows. Follow the steps below to set the month, day , year and time: When the console is idle, press MENU /SELECT .
41 Telephone settings Telephone setup LCD language This feature allows you to change the language used for all screen displays. The language settings on the console and desksets are independent. By default, the language is set to English . When the console is idle, press MENU /SELECT .
42 Telephone settings Telephone setup Home area code Use this feature to program this console to recognize your home area code. This feature makes it easy for you to place a call from the caller ID log.
43 Telephone settings Telephone setup Key tone The console is set to beep with each key press. If you turn off the key tone, there are no beeps when you press keys. When the console is idle, press MENU /SELECT . Press or to scroll to Phone Settings , then press MENU/ SELECT or /SKIP .
44 Telephone settings Telephone setup Dial mode The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone. When the console is idle, press MENU /SELECT . Press or to scroll to Phone Settings , then press MENU/ SELECT or /SKIP .
45 Telephone settings Telephone setup Music on hold Music on hold (M.O.H) is available on this console. When this feature is turned on and you put a call on hold, the far end of the call will hear the music that comes with the console. Y ou can select a desired built-in music for this feature.
46 Telephone settings Telephone setup Phone rename Use this feature to rename the console. If you have to rename your console after initial setup, you are recommended to do so before connecting any system desksets. To change the name: When the console is idle, press MENU /SELECT .
47 Telephone settings Telephone setup Customer support Use this feature to display the VT ech website. When the console is idle, press MENU /SELECT . Press or to scroll to Customer Support , then press MENU/ SELECT or /SKIP . Press CANCEL to return to the main menu.
48 The telephone comes programmed to select a line automatically for calls when you do not press a line key . T o override the automatic line selection setting, see Prime line on page 31 for details. When you answer a call, the telephone automatically selects the ringing line.
49 Telephone operation Telephone operation To make a call using a corded headset: Make sure a corded headset is connected to the console ( page 28 ). Press HEADSET on the console. W ait for a dial tone, then dial the number . T o hang up, press HEADSET.
50 Call waiting If you subscribe to call waiting service with your telephone service provider , you hear a beep if someone calls while you are in the middle of a call. Press FLASH to put your current call on hold and take the new call. Press FLASH at any time to switch back and forth between calls.
51 Telephone operation Options while on calls Hold Use this feature to hold one line while accessing another , or as part of the conference and call transfer features. While on a call, press HOLD . The corresponding line key ( LINE 1 - LINE 4 ) indicator for the line on hold flashes slowly .
52 Telephone operation Options while on calls Call privacy During a call, you can temporarily change the call privacy setting to allow or disallow other extensions to join the call. The original setting is automatically restored after you hang up. To turn call privacy off during a call: While on a call, press MENU /SELECT .
53 Telephone operation Options while on calls Recording a call Use this feature to record a phone conversation during a call. The recording is treated the same as memos and is marked as a new message in the private mailbox.
54 Telephone operation Options while on calls Chain dialing While you are on a call, you can initiate a dialing sequence from the numbers in the directory , caller ID history , redial list or one-touch memory .
55 The last 10 telephone numbers dialed (up to 30 digits) are stored in the console. To view the 10 most recently dialed numbers Press AUTO REDIAL to enter the redial list and display the most recently called number . Press or to view other recently called numbers.
56 Telephone operation Redial To copy a redial entry to directory (continued) Y ou can store the flash signal required by some special services as part of a dialing sequence. Press or to choose Add flash , then press MENU/ SELECT . An F appears on the screen.
57 Telephone operation Redial Auto-redial Use this feature to automatically redial a number up to ten times. Press AUTO REDIAL to enter the redial list and display the most recently called number .
58 The system can support 5-way conference with a maximum of one outside call and four system extensions (including the initiating party), or two outside calls and three system extensions (including the initiating party). The outside call must be established first because an intercom call cannot be placed on hold.
59 Telephone operation Conference call To drop an outside line: Press the corresponding line key ( LINE 1 - LINE 4 ). -OR- If there are two outside calls, press MENU /SELECT and then press or to choose End Line X .
60 Telephone operation Conference call Call scenario The table below provides you with more information on the number of outside lines available for use during a conference call under different call scenarios.
61 Y ou can use the intercom feature for conversations between the console and a system deskset, or between two system desksets. The console and each deskset in the telephone system MUST be assigned a unique extension number for the intercom feature to work.
62 Y ou can transfer a call to any other system telephone. Only the recipient extension can answer the transferred call; other extensions cannot seize the line at that moment.
63 Transfer a call and speak to the receiving party Y ou can transfer a call and speak to the receiving party before completing the transfer while on a call: Press INTERCOM on the console while on a call. The call is put on hold. Press or to scroll to a desired extension, then press MENU/ SELECT .
64 This telephone has 32 one- and two-touch memory locations (speed dial locations) where you can store the phone numbers or system extension numbers you wish to dial more quickly . Y ou can store up to 30 digits in each location. Y ou can access the first 16 locations using only the one-touch buttons.
65 Telephone operation One touch Assign a one-touch entry (continued) Y ou can store the flash signal required by some special services as part of a dialing sequence. Press or to choose Add flash , then press MENU/ SELECT . An F appears on the screen.
66 Telephone operation One touch Review the one-touch entry When the console is idle, press MENU /SELECT . Press or to scroll to One Touch , then press MENU/ SELECT or /SKIP . Press or to scroll to View , then press MENU/ SELECT or /SKIP . Press or to scroll to the desired one-touch location.
67 Telephone operation One touch Edit the one-touch key (continued) Store a signal for switching to temporary tone signaling. If you have dial pulse (rotary) service, this signal is required for some special services. Press or to choose Send tone , then press MENU/ SELECT .
68 Use the directory to store names and phone numbers. Directory entries are not shared with other extensions. The console and each deskset have their own directories. Capacity The directory of this console can store up to 50 entries, with a maximum of 15 alphanumeric characters (including spaces) for names and 30 digits for telephone numbers.
69 Create a new directory entry Use the following steps to store a name and number in the directory . When the console is idle, press DIRECTORY . The console shows a summary with the number of directory entries stored. Press MENU /SELECT to add an entry .
Directory Create directory entries 70 Create a new directory entry (continued) Y ou can include a pause while storing a dialing sequence that requires one during actual dialing. Press or to choose Add pause , then press MENU/ SELECT . A P appears on the screen.
71 Search by name The names appear in alphabetical order . Follow the steps below to search for directory entries on the console. Press DIRECTORY on the console. The screen displays a summary with the number of directory entries stored. Press or to browse through the directory .
72 Y ou can dial, delete or edit a directory entry (name and number) when it is shown on the console screen. Y ou can use the directory review ( page 70 ) or name search ( page 71 ) to show an entry .
73 Directory Dial, delete or edit entries Edit an entry When a directory entry appears, press MENU/ SELECT . Press or to choose Edit , then press MENU/ SELECT . The screen displays Enter Name . Use the dialing keys to edit the name. If you only want to edit the number , skip to step 4.
74 Directory Dial, delete or edit entries Copy a directory entry to one touch When a directory entry appears, press MENU/ SELECT . Press or to choose Copy to 1-touch , then press MENU/ SELECT . The screen displays Enter Number . Use the dialing keys to edit the number .
75 This telephone supports caller ID services that most telephone service providers offer . Caller ID allows you to see the name, number , date and time of calls. Depending on your service subscription, you might see the caller’s number , or the caller’ s name and number from the telephone service provider after the first or second ring.
76 How the caller ID information (call log) works The telephone stores caller ID information for the last 200 incoming calls in the console. Entries are stored in reverse chronological order . The telephone deletes the oldest entry when the log is full to make room for new calls.
77 Memory match If the incoming telephone number is an exact match with a telephone number in your directory , the name that appears on the screen matches the corresponding name in your directory . For example, if Christine Smith calls, her name appears as Chris if this is how you entered it into your directory .
78 Caller ID Caller ID operation View dialing options Although the incoming call history entries have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial the seven digits only , 1 plus the seven digits, or 1 plus the area code plus the seven digits.
79 Caller ID Caller ID operation Save a caller ID entry to the directory When in the caller ID history , press or to browse to the number you wish to save. Press MENU /SELECT , then press or to choose Copy to DIR . Press MENU/ SELECT . The screen displays Enter Name .
80 Caller ID Caller ID operation Copy a caller ID entry to one touch When the desired number appears, press MENU/ SELECT . Press or to choose Copy to 1-touch , then press MENU/ SELECT . The console displays Press a 1-touch key to save the number . Press the one-touch button for the destination party in the upper location.
81 Caller ID Reasons for missing caller ID information Reasons for missing caller ID information There are also occasions when other information or no information shows for various reasons: On-screen message Reason PRIVATE NAME The caller prefers not to show the name.
82 The answering system of this console has two mailboxes, namely the central (auto attendant) mailbox and private mailbox. When the auto attendant feature is turned on, it can be used to answer calls, record messages, direct incoming calls to other system extensions, or enter the remote access menu.
83 Y ou can set up the auto attendant to answer outside calls, provide callers with a company directory , direct calls to a specified extension, and enable callers to record voice messages. Y ou can use the default announcement or record up to three outgoing announcements and one directory announcement.
84 Answering system Auto attendant setup Announcement Use this feature to record up to three new announcements so that you can have a general announcement, different announcements for daytime and after hours, and an announcement for the company directory .
85 Answering system Auto attendant setup Night mode Y ou can turn the night mode on or off. When it is off, only General OGM is available in the announcement submenu; when it is on, both Day and Night OGMs are available in the Announcement submenu. When the console is idle, press ANS SYS .
86 Answering system Auto attendant setup Set the start and end time of auto attendant announcement When the night mode is turned on, you can set the start and end time of the Day OGM and Night OGM . When the console is idle, press ANS SYS . Press or to scroll to Auto Attendant , then press MENU/ SELECT or /SKIP .
87 Answering system Auto attendant setup Play the auto attendant announcement To play the announcement: When the console is idle, press ANS SYS . Press or to scroll to Auto Attendant , then press MENU/ SELECT or /SKIP . Press or to scroll to Announcement , then press MENU/ SELECT or /SKIP .
88 Answering system Auto attendant setup Reset auto attendant Use this feature to reset the auto attendant settings and announcements to default. When the console is idle, press ANS SYS . Press or to scroll to Auto Attendant , then press MENU/ SELECT or /SKIP .
89 This console has a private mailbox that can answer calls and record messages when it is turned on. The private mailbox answers the call after the ring delay time you set in the Private mailbox delay section below . Private mailbox on/off Y ou can turn the private mailbox on or off.
90 Answering system Private mailbox setup Announcement An announcement plays when calls are answered by the private mailbox. The system has a default announcement, “Hello, please leave a message after the tone.” Y ou can use this announcement or record your own.
91 Answering system Private mailbox setup To reset the announcement: When the console is idle, press ANS SYS . Press or to scroll to Private Mailbox , then press MENU/ SELECT or /SKIP . Press or to scroll to Announcement , then press MENU/ SELECT or /SKIP .
92 Answering system Private mailbox setup Call intercept When a caller is leaving a message on your private mailbox, you can stop the recording and talk to the caller by pressing the corresponding line key ( LINE 1 - LINE 4 ). Choose whether private incoming messages can be intercepted by the console during recording.
93 All feature settings below apply to both central (auto attendant) and private mailboxes. Remote access code Use this code to select a three-digit number to allow remote access of the answering system from another telephone. Y ou can change the code to any number from 000 - 999 .
94 Answering system Answering system setup Message alert Use this feature to turn the audible message alert on or off. If the message alert tone is on, the console beeps every 30 seconds when there are new messages in the central mailbox and/or private mailbox.
95 Answering system Answering system setup Call Screening >On Off Ans Sys Setup Remote Code Msg Date/Time Message Alert Message Length >Call Screening Call screening Use this feature to choose whether incoming messages can be heard over the speaker when they are being recorded.
96 Using the auto attendant When auto attendant is on, it automatically picks up the ringing line after the delay time you programmed (see Auto attendant delay on page 83 ), and plays the appropriate auto attendant announcement. Y ou can choose from one of the following options.
97 Answering system Auto attendant operation Auto attendant (AA) flow chart AA records central message Incoming call AA answers and plays outgoing announcement Extension picks up the call Normal call .
98 New message indication The icon displays on the console when there are new messages in the central mailbox. The icon displays on the console when there are new messages and/or memos in the private mailbox. The MESSAGE WAITING indicator on the console flashes when there are new messages in either the central or private mailbox.
99 Answering system Answering system operation NOTES: If you want to play the messages without hearing the date and time information, set the Msg Date/Time option to Skip . See Msg Date/Time on page 93 for details. When you are playing the messages and there are incoming calls, you can press or to view the caller ID information.
100 Answering system Answering system operation Delete all private mailbox messages Y ou can use this feature to delete all messages stored in the private mailbox. When the console is idle, press ANS SYS . Press or to scroll to Private Mailbox , then press MENU/ SELECT or /SKIP .
101 Use this feature to reach your answering system remotely by calling any telephone line connected this console from any touch-tone telephone. Make sure the auto attendant feature or the private mailbox of the console is turned on for this feature to work.
102 Answering system Remote access 7 Press to play current private mailbox announcement. Press 9 to record and wait for the beep before speaking. Press # to stop recording. • • 8 Press to stop the playing message. 9 Press to start recording a memo.
103 All messages are deleted All messages in the central mailbox are erased. All messages in the private mailbox are erased. Auto Att: ON The auto attendant is on. Auto Attendant is reset to default The auto attendant settings are reset to default settings.
104 Appendix Console display screen messages Line is not available at this time The telephone line cord is not plugged into the console. The line you are trying to reach is on a conference call. Call privacy is turned on on the line you are trying to reach.
105 Appendix Console display screen messages Registering handset... (Put handset on cradle to start) The console is registering a cordless handset. Registration failed Registration of a cordless handset or a DECT headset is failed. System busy. Please try again later All telephone lines are in use.
106 If you have difficulty with your telephone, please try the suggestions below . For customer service, visit our website at businessphones.vtech.com or call 1 (800) 595-9511 . In Canada, please dial 1 (800) 267-7377 . The console fails to obtain an IP from the router.
107 Appendix Troubleshooting There is no dial tone. First try all the suggestions above. Make sure you plug the handset cord securely and firmly into the jack on the telephone base and the corded handset. If the previous suggestions do not work, disconnect the telephone line from the console and connect it to a different telephone.
108 Appendix Troubleshooting I cannot make intercom calls. Make sure you choose the correct extension. The destination telephone might be on an external call. W ait and try again. Make sure the INTERCOM light is off before you make an intercom call. If the light is on, the system is busy or the intercom is unavailable.
109 Appendix Troubleshooting My calls fade in and out while I’m using my corded handset. If you have a corded headset plugged into the telephone, try unplugging it and firmly plugging it in again. Disconnect the console from the modular jack and plug in another corded telephone.
11 0 Appendix Troubleshooting If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone lines, you must install a DSL filter between each telephone line cord and telephone wall jack. The filter prevents noise and caller ID problems resulting from DSL interference.
111 Appendix Troubleshooting The auto attendant does not respond when callers dial an extension. Make sure directory announcement is recorded correctly to suit your company’s needs ( page 85 ). Make sure the caller is calling from a touch-tone telephone.
11 2 Appendix Troubleshooting I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. Make sure your computer is powered on. Make sure your Internet connection is working properly .
11 3 Taking care of your telephone Y our telephone base contains sophisticated electronic parts, so you must treat it with care. Avoid rough treatment. Place the corded handset down gently . Save the original packing materials to protect your telephone base if you ever need to ship it.
11 4 This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for T erminal Attachments (ACT A). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX.
11 5 Thi s eq uip men t ha s be en te ste d and fo und t o co mp ly wi th t he lim it s for a Cl as s A di gi ta l devi c e, pur sua nt to Par t 15 of the FCC Rul es.
11 6 Appendix Limited warranty 1. What does this limited warranty cover? The manufacturer of this VT ech product warrants to the holder of a valid proof of purchase (“CONSUMER” or “you”) that .
11 7 Appendix Limited warranty 5. How do you get warranty service? T o obtain warranty service, visit businessphones.vtech.com or call 1 (800) 595-9511 . In Canada, please dial 1 (800) 267-7377 . NOTE: Before calling for service, please review the user’s manual; a check of the PRODUCT’ s controls and features may save you a service call.
11 8 Appendix Technical speci fi cations RF frequency band 1921.536MHz - 1928.448MHz Channels 5 Operating temperature 32°F - 122°F 0°C - 50°C T elephone base voltage (AC adapter output) 5.
11 9 A Add a handset 25 Add a headset 26, 28 Alert tones 5 Announcement 84–87, 90 Answer a call 49 Answer an intercom call 61 Auto-redial 57 Auto attendant 96–97 Auto set IP 33 B Blind transfer 62.
120 M Maintenance 1 13 Make a call 48 Make an intercom call 61 Memo 100 Memory match 77 Menu settings 29 Message Date/T ime 93 Message indication 98 Message playback 98 Missed (new) calls indicator 77.
121 V V olume 38, 50 V olume control 50 W W all mount 18–22 W arranty 1 16–1 17 Website 47 Index.
VT ech Communications, Inc. A member of THE VTECH GR OUP OF COMP ANIES. VT ech is a registered trademark of VT ech Holdings Limited. Specifi cations are subject to change without notice . © 2014 VT ech Communications, Inc. All rights reser ved. 04/14.
デバイスVTech erisbusinesssystem 4-line office phones main consoleの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
VTech erisbusinesssystem 4-line office phones main consoleをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVTech erisbusinesssystem 4-line office phones main consoleの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。VTech erisbusinesssystem 4-line office phones main consoleの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。VTech erisbusinesssystem 4-line office phones main consoleで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
VTech erisbusinesssystem 4-line office phones main consoleを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVTech erisbusinesssystem 4-line office phones main consoleの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、VTech erisbusinesssystem 4-line office phones main consoleに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVTech erisbusinesssystem 4-line office phones main consoleデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
