VTechメーカーVT6221の使用説明書/サービス説明書
ページ先へ移動 of 27
www.vtech.com VT6221 Digital Enhanced Cordless Telephone (DECT) User manual.
1 20401551en_ba_a0 Contents Setting up the telephone ……………………………………………………………………3 Package contents ………………………………………….
T elephone setting s ....................................................................................................20 Setting the ring tone volume ...............................................................................20 Setting the ring tone melody .
3 20401551en_ba_a0 Package contents The package contains the following items: ➭ 1 Base station ➭ 1 AC power adapter ➭ 1 Handset ➭ 2 Dowels / 2 screws ➭ 2 Rechargeable batteries Location To obtain the best possible range, we r ecommend positioning the telephone in a location central to your sphere of activity .
4 20401551en_ba_a0 Setting up the base station ➭ Do not expose the base statio n to direct sunlight. Protect the base statio n against moisture. Do not position the telephone in room exposed to condensation, corrosive steam or excessive dust. Condensation can occur in cellars, garages, conse r vatories or sheds.
5 20401551en_ba_a0 Connecting the telephone Before you can start using your telephone you must plug in the telephone connection cords and the mains cable. Safety note the base statio n ! ➀ T elephone connection cord The telephone connection cord has two dif ferent plugs.
6 20401551en_ba_a0 Removing the cords connection socket. Setting up the telephone First unplug the mains plug fr om the 220V socket and the plug fr om the telephone.
20401551en_ba_a0 7 Putting the handset into operation Y our handset will be ready for operation (for making or accepting calls) only once the battery has been charged for the first time. Inserting the rechargeable batteries The bottom of the handset contains a battery compartment for housing two type AAA batteries (microcells).
8 20401551en_ba_a0 Charging the batteries The batteries are not yet charged when you first unpack the telephone. T o charge the batteries, place the handset on the base statio n. The flashing battery symbol on the handset signals the charging p r ocedu r e.
9 20401551en_ba_a0 Note Y ou can r eplace the handset in the base statio n after every call. Charging is elec t ronically con t rolled to ensure optimal charging of batteries in diffe- r ent charge states. A void removing the batteries f r om the handset for no good r eason, since this a f fects the optimum charging cycle.
10 20401551en_ba_a0 Displays, keys, symbols Displays The display gives you information on the current status of your telephone. The «standby indicator» shown below shows you your handset is ready for use.
20401551en_ba_a0 Handset keys Open call list*, press key several times to scr oll down. Previous called number(s), pr ess to scroll through this r edial list. Performs differ ent functions depending on the context. ➮ Deletes the last character or number of an entry in the display .
20401551en_ba_a0 In programming mode: Direct call on/of f. Set handset volume. Set ring tone melody . Set ring tone volume. Handset: Display Delete/cancel key Speed-dial key T alk key Flash key Numeri.
20401551en_ba_a0 Base station keys Paging key Charging cradle for the handset Setting up the telephone PAGE 13.
20401551en_ba_a0 Key lock on/off . During incoming calls the key lock is deactivated for the duration of the call. Key lock on Hold down the hash key for about 2 seconds. The display shows the key symbol . Key lock off Hold down the hash key for about 2 seconds.
20401551en_ba_a0 Exte r nal calls P r ess the Talk key. Enter the requir ed telephone number . This number will then be dialled. To end this external call: P r ess the Talk-key,or replace the hendset .
20401551en_ba_a0 Accepting a call Calls are signalled acoustically as well as optically in the handset display . ➭ The caller’ s number is not displayed if the caller has withheld his number i.e. if he has suppressed transmission of his number , or if this is not technically possible.
20401551en_ba_a0 T elephoning Redial The last 10 dialled numbers are saved under the r edial key . Open the redial list. The last dialled number is displayed. Pr ess this redial key again to scroll thr ough the list. P r ess the -key to exit the redial list .
20401551en_ba_a0 Dialling from the call list If your network operator supports caller ID (CLIP), numbers (up to 18 digits) of unanswe- r ed calls a r e saved in the caller list. The list can hold up to 10 entries. If the list is full, the oldest entry is deleted and the newest is put first in the list.
20401551en_ba_a0 T elephoning Muting the handset If you do not want your call partner to hear what you are saying to another person in the room, you can temporarily mute your handset.
Setting the ring tone melody Y ou have a choice of six different melodies. Press the pr ogramming key . Press 5. The curr ent setting is displayed (e.g. “2/6 ” is the second of 6 settings). Use numerical keys 1 to 6 to set the preferr ed melody . Press the pr ogramming key to save the setting.
20401551en_ba_a0 Speed dialling Y our VT6221 can sto r e 10 speed-dial numbers, each up to 18 digits. Selecting speed dialling Press the speed-dial key . The first entry is displayed. Scroll thr ough the speed-dial list by pressing the speed-dial key as often as requir ed or use numerical keys 1 to 9 to select an entry .
22 20401551en_ba_a0 Direct call (baby call) W ith direct call, you can pr ogram a number which can be directly dialled when any key (except the programming key) is pr essed. Entering/editing the direct call number Press the pr ogramming key . Press 3.
23 20401551en_ba_a0 T elephone settings Flash time Restoring default settings This procedur e resets all the personal prefer ences you have programmed and r estores the telephone to default mode. Press the pr ogramming key . Press 9. Enter your PIN. Press the pr ogramming key to save the setting.
20401551en_ba_a0 24 T elephone settings Changing the PIN The PIN is a four -digit password to protect the base station and handsets against unau- thorised access. The telephone is delivered with the system PIN set to «0000». Press the pr ogramming key .
25 20401551en_ba_a0 Appendix Standard: DECT Number of channels: 120 duplex channels Frequencies: 1880 MHz bis 1900 MHz Range: up to 300 meters outdoors, up to 50 meters indoors Base statio n power supply: 220 V /50 Hz (power pack) Base station 220V AC adapter Handsets operating time: standby / talk time app r ox.
Tel: 852-2776 3223 VTech Electronics (HK) Ltd. Rm 708, 7/F., L af o r d Centre, 838 Lai Chi Kok Road, Kowloon, Hong Kong..
デバイスVTech VT6221の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
VTech VT6221をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVTech VT6221の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。VTech VT6221の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。VTech VT6221で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
VTech VT6221を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVTech VT6221の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、VTech VT6221に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVTech VT6221デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
