WatchGuard TechnologiesメーカーV10.0の使用説明書/サービス説明書
ページ先へ移動 of 38
W atchGuard®Mobile VPN with IPSec Administrator Guide W atchGuard Mobile VPN v10.0 R evised: November 28, 2007.
ii Mobile User VPN ADDRESS: 505 Fifth Avenue South Suite 500 Seattle, W A 98104 SUPPORT : www .w atchguard.com/suppor t U.S. and Canada +877.232.3531 All Other Countries +1.206.521.3575 SALES: U.S. and Canada +1.800.734.9905 All Other Countries +1.206.
Administrator Guide 1 1 Configure the Firebox X Edge to use Mobile VPN with IPSec The W atchGuard® Mobi le VPN with IPSec clien t is a software applica tion that is ins talled on a r emote computer . The client makes a secur e connection from the remote c omputer to your pr otected network through an unsecured network.
Enabling Mobil e VPN for a Fir ebox User Account 2 Mobile User VPN The F irebox X Edge creates a .wgx file for a user when a Fir ebox user ’ s account i s configured f or Mobile VPN, as described in this chapter .
Administrator Guide 3 Configur ing Global Mobi le VPN Client Settings 10 Set MUVPN key exp iration in kilobytes and/or ho urs. The d efault values are 81 92 KB and 24 hours. T o remov e a size and/or time ex piration, set the v alue to zer o (0). 11 Make su re the VPN Client T ype drop- down list is set to Mobile User .
Distributing the Software and Profiles 4 Mobile User VPN 1 Y ou can choose to make the .wgx file r ead- only so that the user cannot change the secu rity polic y file. T o do this, select the Make the MUVPN client security polic y r ead- only check box.
Administrator Guide 5 Distributing the Softwar e and Profiles • The end-user p rofile This file contains the user name, shared key , and settings that enable a remote computer t o connect securely over the Internet to a protected, private computer network .
Distributing the Software and Profiles 6 Mobile User VPN.
Administrator Guide 7 2 Using Fireware Policy Manager to Configure Mobile VPN with IPSec The W atchGuard® Mobi le VPN with IPSec clien t is a software applica tion that is ins talled on a r emote computer . The client makes a secur e connection from the remote c omputer to your pr otected network through an unsecured network.
About Mobile VPN Client Configuration Files 8 Mobile User VPN About Mobile VPN Client Configuration Files With Mobile VPN with IPSec, the network security administrator contr ols end-user profiles. P olicy Man- ager is used to set the name of the end user and create a clien t configura tion file , or profil e, with the file extension .
Administrator Guide 9 Configuring the Firebox for Mobile VPN 3 Use the instruc tions pro vided here to go through each screen of the wizard. Click Next after each step . 4 Select a user aut hentica tion server Select an authentication ser ver fr om the Authentica tion Ser v er drop- down list.
Configuring the Firebox for Mobile VPN 10 Mobile User VPN 6 Direct the flow of Internet traffic: Select an option for Internet tr affic . Y ou can allow all Internet traffic between th e Mobile VPN client and the Inte rnet to use the ISP of t he client, or you can make all Internet traffic use th e VPN tunnel.
Administrator Guide 11 Configuring the Firebox for Mobile VPN 8 Create the virtual IP address pool: Click Add to add one IP address or an IP address r ange. Repeat this step to add more virtua l IP addr esse s . Mobile VPN users will be assigned one of these IP a dd res se s w he n t he y co nn ec t t o yo ur ne tw or k.
Modifying an Existing Mobile VPN Profile 12 Mobile User VPN Adding Users to a Firebox Mobile VPN Group T o create an Mobile VPN tunnel with the F irebox, remote users type their user nam e and passwor d to authenticate. W atchGuard® Sy stem Mana ger software uses this information to authenticate the u ser t o the Fir ebox®.
Administrator Guide 13 Modifying an Existing Mobile VPN Profile 3 Click Edit . The Edit MUVPN Extended Authentication Group dialog box appears. Use the following fields to edit the gr oup profile: Authentication Server Select the authentication server to use for this Mobile VPN group .
Modifying an Existing Mobile VPN Profile 14 Mobile User VPN timeouts for the Mobile VPN group are always ignored because you set timeouts in the individual F irebox user ac counts. The session and idle timeouts cannot be longer than the value in th e SA Lif e field.
Administrator Guide 15 Modifying an Existing Mobile VPN Profile Phase2 Settings Select the proposal and key expiration sett ings f or the Mobile VPN tunnel.
Modifying an Existing Mobile VPN Profile 16 Mobile User VPN Defining advanced Phase 1 settings T o define advanced Phase 1 set tings f or an Mobile VPN user profile: 1 Fro m th e IP Sec T unnel tab of the Edit MUVPN Extended A uthentication Group dialog box, select Adva nced .
Administrator Guide 17 Configuring WINS and DNS Servers 2 Fro m th e Ty p e drop- down list, select ESP or AH as the proposal method. Only ESP is suppor ted at this time. 3 Fro m th e Authentication drop- do wn list, select SHA1 or MD5 for the authenti cation method.
Locking Down an End-User Profile 18 Mobile User VPN Locking Down an End-User Profile Y ou can use the advanced se ttings to lock down th e end-user profile so that u sers can see some set- tings but not change them, and hide other settings so that users cannot change them.
Administrator Guide 19 Configuring Policies to Filter Mobile VPN T raffic Configuring Policies to Filter Mobile VPN T raffic In a default configuration, Mobile VPN with I PSec users have full access privileges through a Fir ebox®, with the Any policy .
Re-creating E nd-User Profiles 20 Mobile User VPN Under MUVPN Group , Po lic y Manager di splays the authen tication server , in parentheses, f or the Mobil e VPN g roup . Using the Any Policy The Any policy i s added to all Mobile VPN use r gr oups by def ault.
Administrator Guide 21 Distributing the Softwar e and Profiles Distributing the Sof tware and Profiles W atchGuard® r ecommends distrib uting end-user profiles b y encr ypted email or with some other secure method.
Additional Mobile VPN T opics 22 Mobile User VPN T erminating IPSec connections T o fully stop VPN connections, the F irebo x must be restarted. Removing the IPSec polic y do es not stop current connections. Global VPN settings Global VPN settings on your F irebo x apply to al l manual BOVPN tunnels, managed tunnels, and Mobile VPN tunnels.
Administrator Guide 23 3 Mobile VPN Client Inst allation and Connection The W at chGuard® Mobile VPN with IPSec client is installed on an em plo yee computer , whether the employee travels or works from home. The employee uses a standard Internet connectio n and acti- vates the Mobil e VPN client.
Installing the Mobile VPN with IPSec Client 24 Mobile User VPN > W indows F irewall > Change Settings > Exceptions ) for UDP port 4500. This will enable Mobile VPN keep -alive packets from the Fir ebox® to reach y our client and keep the VPN tunnel up.
Administrator Guide 25 Installing the Mobile VPN with IPSec Client Importing the end-user profile When the co mputer restarts, the W at chGuard Mobile VPN C onnection Monitor dialog box opens.
Connecting the Mobile VPN Client 26 Mobile User VPN If the password you use is y our password on an Active Directory or LDAP server and you choose to store it, the password becomes inv alid when it changes on the authentic ation server . 7 Click Fin ish .
Administrator Guide 27 Connecting the Mobile VPN Client Star t y our connec tion to the Internet through a Dial-Up Net w ork ing connection or LAN connection. Then, use the instructions below or select your prof ile, c onnect, and disconnec t by righ t- clicking the Mobile VPN icon on your W indows toolbar .
Seeing Mobile VPN Log Messages 28 Mobile User VPN 4 Use the Connection Mode drop- down list to set the connection behavior you want for this profile. - Manual - When you select manual connection mode, the cl ient does not try to restart the VPN tunnel automatically if the VPN tunnel goes down.
Administrator Guide 29 Securing Y our Computer with the Mobile VPN Firewall Securing Y our Computer with the Mobile VPN Firewall The W at chGuard® Mobile VPN with IPSec cl ient in cludes two fir ewall compone nts: Link firew all The link firewall is not enabled b y default.
Securing Y our Computer with the Mobile VPN Firewall 30 Mobile User VPN 4 Fro m th e Stateful Inspec tion dr op- down list, select when connected or always . If y ou s ele ct when connected , the link fir ewall operat es only when the VPN tunnel is active f or this profile.
Administrator Guide 31 Securing Y our Computer with the Mobile VPN Firewall 3 Define friendly net works and create firewall rules as described in the subsequent sections. Defining friendly networks Use the Friendly Netw orks tab to define sp ecific known networks for which you want to generate a firewall r ule set.
Securing Y our Computer with the Mobile VPN Firewall 32 Mobile User VPN T o create a rule, click New . Use the four tabs in the Fir ewa ll Ru le En tr y dialog box to defi ne the traffic you want to control. Each tab is described below. General tab On the Gener al tab, you define the basic proper ties of your rule .
Administrator Guide 33 Securing Y our Computer with the Mobile VPN Firewall Loc al ta b Use the Local tab to define the local IP address and por ts that are controlled by this rule, if any . We r ec- ommend that, in any rule, you configure the Local IP Addr esses setting to enable the Any IP address radio button.
Securing Y our Computer with the Mobile VPN Firewall 34 Mobile User VPN Remote tab Use the Remote tab to define the remote IP address or addr esses and ports that are controlled by this rule, if any .
Administrator Guide 35 Securing Y our Computer with the Mobile VPN Firewall.
Securing Y our Computer with the Mobile VPN Firewall 36 Mobile User VPN.
デバイスWatchGuard Technologies V10.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
WatchGuard Technologies V10.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWatchGuard Technologies V10.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。WatchGuard Technologies V10.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。WatchGuard Technologies V10.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
WatchGuard Technologies V10.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWatchGuard Technologies V10.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、WatchGuard Technologies V10.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWatchGuard Technologies V10.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
